• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.321-325
• /
• 2020

The present study demonstrates the effect of magnetic pulse compaction and spark plasma sintering on the microstructure and mechanical property of a sintered W body. The relative density of green specimens prepared by magnetic pulse compaction increases with increase in applied pressure, but when the applied pressure is 3.4 GPa or more, some cracks in the specimen are observed. The pressureless-sintered W shows neck growth between W particles, but there are still many pores. The sintered body fabricated by spark plasma sintering exhibits a relative density of above 90 %, and the specimen sintered at 1,600 ℃ after magnetic pulse compaction shows the highest density, with a relative density of 93.6 %. Compared to the specimen for which the W powder is directly sintered, the specimen sintered after magnetic pulse compaction shows a smaller crystal grain size, which is explained by the reduced W particle size and microstructure homogenization during the magnetic pulse compaction process. Sintering at 1,600 ℃ led to the largest Vickers hardness value, but the value is slightly lower than that of the conventional W sintered body, which is attributed mainly to the increased grain size and low sintering density.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.25-36
• /
• 2015

The complex analysis of the pedigree records of Czech Landrace (CLA), Czech Large White-dam line (CLWd), Czech Large White-sire line (CLWs), Duroc (DC), and Pietrain (PN) was performed to determine trends of genetic diversity (GD), and to find the main sources of the GD loss. The total size of the pedigree was 132,365, 391,151, 32,913, 13,299, and 7,160 animals in CLA, CLWd, CLWs, DC, and PN, respectively. Animals born in the years 2011 through 2013 were assumed as the reference population. The average pedigree completeness index for one generation back was 95.9%, 97.4%, 91.2%, 89.8%, and 94.2% for appropriate breeds. Number of ancestors explaining 100% of gene pool was 186, 373, 125, 157, and 37 in CLA, CLWd, CLWs, DC, and PN, respectively. The relative proportion of inbred animals (58%, 58%, 54%, 47%, and 25%), the average inbreeding (2.7%, 1.4%, 2.5%, 3.6%, and 1.3%) and the average co-ancestry (3.1%, 1.6%, 3.3%, 4.2%, and 3.3%) were found over the past decade in analysed breeds. The expected inbreeding under random mating increased during the last 10 years in CLWs and PN and varied from 1.27% to 3.2%. The effective population size computed on the basis of inbreeding was 76, 74, 50, 35, and 83 in 2012 in CLA, CLWd, CLWs, DC, and PN, respectively. The shortest generation interval (1.45) was observed for CLWd in sire to son selection pathway. The longest generation interval obtained PN (1.95) in sire to daughter pathway. The average relative GD loss within last generation interval was 7.05%, 4.70%, 9.81%, 7.47%, and 10.46%, respectively. The relative proportion of GD loss due to genetic drift on total GD loss was 85.04%, 84.51%, 89.46%, 86.19%, and 83.68% in CLA, CLWd, CLWs, DC, and PN, respectively. All breeds were characterized by a high proportion of inbred animals, but the average inbreeding was low. The most vulnerable breeds to loss of GD are DC and PN. Therefore, a breeding program should be more oriented to prevent the increase of GD loss in these breeds.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.590-596
• /
• 2019

Purpose: An experimental study was conducted on the sand samples for the size effect of the test specimens, one of the problems of the direct shear test. Method: Jumunjin standard sand, a representative sand of Korea, was used as sand sample. The large direct shear test was performed to analyze the shear strength at 50%, 60%, 70%, and 80% relative density, and then the comparative results were compared with the test results of the small direct shear test. Result: It was analyzed that the internal friction angle of the small shear tester tended to be relatively large in the dense region. It was analyzed that the results of the large shear tester tend to be relatively large in the region of medium relative density. Conclusion: The size effect on the samples in the direct shear test on sandy soil was analyzed to be relatively small.

• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.123-133
• /
• 2024

This study investigates the effects of loading frequency (f) and specimen size on the liquefaction resistance of clean sand. A series of cyclic direct simple shear tests were conducted on Jumunjin sand with varying consolidated relative densities (40% and 80%), f values (0.05, 0.10, and 0.20 Hz), and diameter to height (D/H) ratios (3.63, 3.18, 2.82, and 2.54). The results demonstrated the significant influence of f and D/H ratio on the number of cycles to liquefaction (N_cyc-liq) and the cyclic resistance ratio (CRR₁₅). It was observed that increasing f linearly increased N_cyc-liq. Increasing the specimen height also led to higher N_cyc-liq values irrespective of the f or relative density. Moreover, a positive correlation between CRR₁₅ and f indicated that higher f yielded higher CRR₁₅. This relationship was more pronounced in dense sand than in loose sand. Specimen height also significantly affected CRR₁₅, with increasing the specimen height resulting in higher CRR₁₅ values. Furthermore, the effect of f on CRR₁₅ was less significant compared to the influence of specimen height. The effect of f on the normalized cyclic resistance ratio (NCRR) was relatively negligible for loose sand but more substantial for dense sand depending on the D/H ratio. Data analysis revealed that the NCRR generally decreases as the D/H ratio increases. An interpolation formula was provided to calculate the NCRR based on the D/H ratio regardless of the f and relative density.

• Conservation Science in Museum
• /
• v.2
• /
• pp.19-25
• /
• 2000

In order to studies proper conservation treatment condition of waterlogged archaeological wood excavated from wetland in Shinchang-dong, Kwangju, 2 kinds of wooden objects were treated with PEG(Poly-Ethylene Glycol), sucrose and lactitol and their size stability and relative humidity were analyzed and compared each other. The result showed that Quercus spp. had the highest size stability in 2 Step-PEG treatment using PEG#200(MW:200) and PEG#4000 (MW:3,350) and Acer spp. was the highest in treatment using only PEG#4000. In relative humidity test after treatment 2 Step-PEG treatment showed the lowest size stability. In the meantime, sucrose and lactitol-treated sample was fast for penetration, sucrose-treated sample showed a sharp increase for penetration in as high as 84% humidity condition and medicine flew out a lot and lactitol-treated sample got enlarged with fine cracking(splitting) in relative humidity test. In relative humidity test, the samples showed cracking(splitting) in all treatment materials except for 2 Step-PEG treatment. This study showed that waterlogged archaeological wood excavated from Shinchang-dong had the highest size stability and highest adaptation to humidity change in case of treatment with 2 Step-PEG.

• Journal of Labour Economics
• /
• v.34 no.2
• /
• pp.1-27
• /
• 2011

This paper analyzes the demand and supply structure of the market for college professors, and then characterizes the changes in the economic status of them for the last three decades. On the supply side, the number of Korean recipients of doctorate degrees from the U.S. institutions, relative to the number of newly hired professors, has declined dramatically since early 1990s. The relative remuneration of professors, which is found to be closely related to the 'number of students per professor', has also declined steadily. These suggest that the decline in the relative wage of professors has been a driving force for the decline in the relative size of new PhD's in the U.S.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.3
• /
• pp.203-210
• /
• 2000

In this paper, we propose a new unsupervised learning network and competitive learning algorithm for pattern classification. The proposed network is based on relative similarity, which is similarity measure between input data and cluster group. So, the proposed network and algorithm is called relative similarity network(RSN) and learning algorithm. According to definition of similarity and learning rule, structure of RSN is designed and pseudo code of the algorithm is described. In general pattern classification, RSN, in spite of deletion of learning rate, resulted in the identical performance with those of WTA, and SOM. While, in the patterns with cluster groups of unclear boundary, or patterns with different density and various size of cluster groups, RSN produced more effective classification than those of other networks.

• Geomechanics and Engineering
• /
• v.38 no.2
• /
• pp.165-177
• /
• 2024

Liquefaction phenomenon refers to a phenomenon in which excess pore water pressure occurs when a dynamic load such as an earthquake is rapidly applied to a loose sandy soil ground where the ground is saturated, and the ground loses effective stress and becomes liquid. The laboratory repetition test for liquefaction evaluation can be performed through a repeated triaxial compression test and a repeated shear test. In this regard, this study attempted to evaluate the effects of the relative density of sand on the liquefaction resistance strength according to particle size distribution using repeated triaxial compression tests, and additional experimental verification using numerical analysis was conducted to overcome the limitations of experimental equipment. As a result of the experiment, it was confirmed that the liquefaction resistance strength increased as the relative density increased regardless of the classification of soil, and the liquefaction resistance strength of the SP sample close to SW was quite high. As a result of numerical analysis, it was confirmed that the liquefaction resistance strength increased as the confining pressure increased under the same relative density, and the liquefaction resistance strength did not decrease below a certain limit even though the confining pressure was significantly reduced at a relatively low relative density. This is judged to be due to a change in confining pressure according to the depth of the ground. As a result of analyzing the liquefaction resistance strength according to the frequency range, it was confirmed that there was no significant difference from the laboratory experiment results in the basic range of 0.1 to 1.0 Hz.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.290-299
• /
• 2011

Field tests were carried out with five different mesh sizes (86.6, 101.0, 121.2, 137.7, 151.5mm) to study the relative efficiency of monofilament and multifilament gill net for Marbled sole, Pleuronectes yokohamae, in the western sea of Korea, 2007-2009. The relative efficiency was analyzed by length distribution, catch in number, catch in weight and weight per individual for Marbled sole. Statistical T-test was done to verify the efficiency between two gears. In the field tests, the total body length range, catch in number and weight of Marbled sole was 15.8-48.2cm, 728 and 254,939g, respectively. During the field tests, Marbled sole less than 15cm length which is prohibition size of fishing was not caught, but the caught number of Marbled sole less than 19.5cm length which is first maturity length was 13 (1.8%) and the caught number of Marbled sole more than 19.5cm was 715 (98.2%). Catches of monofilament gill net was average 1.4 times more efficient than multifilament gill net. The weight per individual and total length by mesh sizes in the two gears tended to gradually increase according to mesh size increasing. But there was little difference of weight per individual and total length by mesh sizes between two gears.

• Journal of the Korean Academic Society of Industrial Cluster
• /
• v.2 no.1
• /
• pp.44-60
• /
• 2008

This paper analyses the relative efficiency and competitiveness of production structure for the industrial clusters(Ulsan, Changwon, Kumi, Wonjoo, Banwol & Siwha, Kwangwju, Gunsan) which had allocated in 2004 in Korea by the DEA approaches. The results show that except U1san, Wonjoo, the 5 industrial clusters have improved the relative efficiency in terms of input and output since they were allocated. And, the reason of the inefficiency for the 5 industrial clusters were not for the technical relationship but for the production scaling size. That is, by clustering for the industrial production firms, the economic effect came true throughout the production scaling size effects. Also, by the positioning approach for the production factors such as labor, capital, and R&D investment via production growth, the results show that Banwol & Siwha, Goomi clusters have effectively been managed, but Wonjoo, U1san and Gunsan are not.