• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.2
• /
• pp.115-121
• /
• 2013

For the auto-landing operation of an air vehicle, the possibility of auto-landing operation should be first evaluated by testing the navigation performance through a flight test. In general, navigation performance is tested by analyzing north/east/down (NED) errors relative to reference equipment whose precision is about 8~10 times higher than that of a navigation system. However, to evaluate the auto-landing operation of an air vehicle, whether the air vehicle approaches a glide path aligned with the runway, within a specific error, needs to be examined rather than examining the north/east errors of the navigation system. Therefore, the longitudinal/lateral errors of air vehicle heading need to be analyzed. In this study, a method for analyzing the longitudinal/lateral errors of a navigation system was proposed as the navigation performance test method for evaluating the safety during the auto-landing of an air vehicle. Also, flight tests were performed six times, and the safety of auto-landing was examined by analyzing the performance using the proposed method.

• Journal of Navigation and Port Research
• /
• v.42 no.5
• /
• pp.311-316
• /
• 2018

IMO introduced the concept of e-Navigation and proposed MSPs(Maritime Service Portfolios) concept to reduce marine accidents, to improve efficiency of ship operation, port operation, and ship operation technology. Korean e-Navigation defines S1 ~ S5 services, as the service concept focused on domestic e-Navigation service corresponding to IMO MSPs, and is constructing a system as an ongoing project. S2 service (onboard system remote monitoring service) among the concepts of Korean e-Navigation services, is a service concept that judges the emergency level according to risk if an abnormal condition occurs during navigation, and provides corresponding guidance to accident ships based on emergency level. The purpose of this paper is to provide a basic architecture proposal of Korean e-Navigation S2 service navigation safety module, based on the S2 service operation concept. To do this, we conducted a questionnaire survey to ask experts with experience with sailors, to respond to the subjective risk experienced by sailors considering effects of anomalies, including equipment failure relative to sailing and navigational safety. Risk level for each abnormal condition was classified. The basic algorithm design of the navigation safety module is composed of safety index (SI) calculation module based on results of questionnaire and expert opinions, safety level (SL) determination module according to safety index, and corresponding guidance generation module according to safety level. To conduct basic validation of basic architecture of the navigation safety module, simulation of the ship anomaly monitoring was performed, and results have been revealed.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.101-111
• /
• 2023

Many spoofing detection studies have been conducted to cope with the most difficult types of deception among various disturbances of GPS, such as jamming, spoofing, and meaconing. In this paper, we propose a spoofing detection scheme based on elevation masked-relative received power between GPS L1 and L2 signals in a system using a multi-band array antenna. The proposed scheme focuses on enabling spoofing to be normally detected and minimizes the possibility of false detection in an environment where false alarms may occur due to pattern distortion among elements of an array antenna. The pattern distortion weakens the GPS signal strength at low elevation. It becomes confusing to detect a spoofing signal based on the relative power difference between GPS L1 and L2, especially when GPS L2 has weak signal strength. We propose design parameters for the relative power threshold including beamforming gain, the minimum received power difference between L1 and L2, and the patch antenna gain difference between L1 and L2. In addition, in order to eliminate the weak signal strength of GPS L2 in the spoofing detection process, we propose a rotation matrix that sets the elevation mask based on platform coordinates. Array antennas generally do not have high usefulness in commercial areas where receivers are operated alone, but are considered essential in military areas where GPS receivers are used together with signal processing for beamforming in the direction of GPS satellites. Through laboratory and live sky tests using the device under test, the proposed scheme with an elevation mask detects spoofing signals well and reduces the probability of false detection relative to that without the elevation mask.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.1
• /
• pp.43-56
• /
• 2011

An integrated system composed of guidance, navigation and control (GNC) system for autonomous proximity operations and the docking of two spacecraft was developed. The position maneuvers were determined through the integration of the state-dependent Riccati equation formulated from nonlinear relative motion dynamics and relative navigation using rendezvous laser vision (Lidar) and a vision sensor system. In the vision sensor system, a switch between sensors was made along the approach phase in order to provide continuously effective navigation. As an extension of the rendezvous laser vision system, an automated terminal guidance scheme based on the Clohessy-Wiltshire state transition matrix was used to formulate a "V-bar hopping approach" reference trajectory. A proximity operations strategy was then adapted from the approach strategy used with the automated transfer vehicle. The attitude maneuvers, determined from a linear quadratic Gaussian-type control including quaternion based attitude estimation using star trackers or a vision sensor system, provided precise attitude control and robustness under uncertainties in the moments of inertia and external disturbances. These functions were then integrated into an autonomous GNC system that can perform proximity operations and meet all conditions for successful docking. A six-degree of freedom simulation was used to demonstrate the effectiveness of the integrated system.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.593-601
• /
• 2012

This paper develops and analyzes a new multiple-hypothesis Receiver Autonomous Integrity Monitoring (RAIM) algorithm as a candidate for future standard architecture. The proposed algorithm can handle simultaneous multiple failures as well as a single failure. It uses measurement residuals and satellite observation matrices of several consecutive epochs for Failure Detection and Exclusion (FDE). The proposed algorithm redueces the Minimum Detectable Bias (MDB) via the Relative RAIM (RRAIM) scheme. Simulation results show that the proposed algorithm can detect and filter out multiple failures in tens of meters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.562-569
• /
• 2016

This paper proposes a navigation system with a robust localization method for an underwater unmanned vehicle. For robust localization with IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and depth sensors, the EKF (Extended Kalman Filter) has been utilized to fuse multiple nonlinear data. Note that the GPS (Global Positioning System), which can obtain the absolute coordinates of the vehicle, cannot be used in the water. Additionally, the DVL has been used for measuring the relative velocity of the underwater vehicle. The DVL sensor measures the velocity of an object by using Doppler effects, which cause sound frequency changes from the relative velocity between a sound source and an observer. When the vehicle is moving, the motion trajectory to a target position can be recorded by the sensors attached to the vehicle. The performance of the proposed navigation system has been verified through real experiments in which an underwater unmanned vehicle reached a target position by using an IMU as a primary sensor and a DVL as the secondary sensor.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.47-48
• /
• 2015

VTSO make a decision which one will be danger and what to expect ship's actions due to each encountering situation with CPA(Closest Point of Approach) and TCPA(Time to Closest Point of Approach) by monitoring ship's vectors(Course & Speeds) in real-time through the VTS system. This study is the fundamental research for developing algorithm and system that does not decide the collision risk in one's own ship's viewpoints, but it identifies the related ships into danger through the third party(VTS ) in real time.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.1
• /
• pp.37-44
• /
• 2016

This paper presents an algorithm for Real-Time Orbit Determination (RTOD) of navigation satellites for the Korean Regional Navigation Satellite System (KRNSS), when the navigation satellites generate ephemeris by themselves in abnormal situations. The KRNSS is an independent Regional Navigation Satellite System (RNSS) that is currently within the basic/preliminary research phase, which is intended to provide a satellite navigation service for South Korea and neighboring countries. Its candidate constellation comprises three geostationary and four elliptical inclined geosynchronous orbit satellites. Relative distance ranging between the KRNSS satellites based on Inter-Satellite Ranging (ISR) is adopted as the observation model. The extended Kalman filter is used for real-time estimation, which includes fine-tuning the covariance, measurement noise, and process noise matrices. Simulation results show that ISR precision of 0.3-0.7 m, ranging capability of 65,000 km, and observation intervals of less than 20 min are required to accomplish RTOD accuracy to within 1 m. Furthermore, close correlation is confirmed between the dilution of precision and RTOD accuracy.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.4
• /
• pp.427-433
• /
• 2019

This paper propose a fuzzy inference model for map building and navigation for a mobile robot with an active camera, which is intelligently navigating to the goal location in unknown environments using sensor fusion, based on situational command using an active camera sensor. Active cameras provide a mobile robot with the capability to estimate and track feature images over a hallway field of view. In this paper, instead of using "physical sensor fusion" method which generates the trajectory of a robot based upon the environment model and sensory data. Command fusion method is used to govern the robot navigation. The navigation strategy is based on the combination of fuzzy rules tuned for both goal-approach and obstacle-avoidance. To identify the environments, a command fusion technique is introduced, where the sensory data of active camera sensor for navigation experiments are fused into the identification process. Navigation performance improves on that achieved using fuzzy inference alone and shows significant advantages over command fusion techniques. Experimental evidences are provided, demonstrating that the proposed method can be reliably used over a wide range of relative positions between the active camera and the feature images.

• Journal of Navigation and Port Research
• /
• v.39 no.5
• /
• pp.417-422
• /
• 2015

Sea-ports in Northern Vietnam have experienced a rapid growth of container throughput in recent years. To accompany with such development, huge investment also has been performed to enhance not only local port capacity but also the regional logistics system. Container terminals in Northern Vietnam locate centrally along Cam river of Haiphong city, leaving 2 others in Quang Ninh province. Five out of totally 11 container terminals in the area are under the control of Vinalines - a national corporation in field of maritime industry. In this paper, those terminals are classified in terms of location and ownership. The volume of container throughput and facilities of all container terminals in Northern Vietnam from 2005 to 2014 are recorded in order to compare the performance of groups. A Data Envelopment Analysis (DEA) is then applied to evaluate the relative efficiency of such terminals. Before conclusion, number of suggestions will be contributed to related parties.