• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.231-238
• /
• 1986

This field experiment was undertaken to assess the effects of three levels of inclination ($10^{\circ}$, $20^{\circ}$ and $30^{\circ}$) and four rates of $N-P_2O_5-K_2O$ (0-0-0, 14-10-10, 28-25-25, and 42-40-40 kg/10a) on the hilly pasture concerning to establishment, forage yield and quality, and botanical composition in the mixed grass-clover sward set up on a new reclaimed woodland by an oversowing method. This part was concerned with the concentration and mutual balance of mineral nutrients in relation to grass tetany hazard. The results obtained were summarized as follows: 1. Concentration of exchangeable Mg, relative proportions of Mg to CEC, K, and Ca in soil were considerably below the critical level for good forage growth and prevention of grass tetany. These properties were rather worsened by increasing the inclination grade and the NPK rate. 2. Compared with the critical level for the likelihood of tetany (Mg < 0.2%, K > 2.5%, and K/(Ca+Mg) equivalent ratio > 2.2 in forages in DM basis), mean concentration of Mg in mixed forages turned out to range from 0.09 to 0.14%. 2.6% of K concentration and 2.5 of K/(Ca+Mg) equivalent ratio were shown to be at a normal NPK rate. The likelihood of grass tetany was generally enhanced by increasing the inclination grade and the NPK rate. 3. The increasing of the inclination grade and NPK rate rather aggravated the low Mg concentration and unbalanced mutual ratios of mineral nutrients, from which resulted the grass tetany hazard and the depression of forage growth. To prevent these two resulted factors, Mg fertilization on grassland and/or extra Mg supplement to dairy cattle needed to be carried out. 4. The Ca/P ratios in the mixed forages ranging from 1.0 to 2.0 were reduced by the increased rate of NPK, whereas the difference due to inclination grade was yet to be recognized.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2021

For sterilization of microorganisms of the Listeria genus contaminating enoki mushroom, pilot mushroom grower equipped with air sterilization devices were developed. Sterilization experiments were performed using physical and chemical treatments. Internal temperature and humidity were controlled, maintaining 6.62℃±0.30 in the upper shelves, 6.46℃±0.24 in the middle shelves, and 6.48℃±0.25 in the lower shelves. Humidities were 79.97%±4.42, 79.43%±4.06, and 79.94±4.30%, respectively, with a temperature setting of 6.5℃, and a relative humidity of 75%. A suitable enoki mushroom cultivation stage for air sterilizer application was during the growth stage, with temperature in the 6.5~8.5℃ range, and humidity of 70~80%. At these same internal conditions, the ozone concentration in the mushroom cultivator was found to be 160 ppb during ion-cluster generator operation. After physical sterilization, the Listeria innocua survival rate was 0.1 to 0.9% using ion cluster sterilization, and 9.3 to 10.6% using UV air sterilization. The Listeria innocua survival rates on different materials were 9.3~10.6% on the metal specimen, and 9.9~16.2% on the plastic wrapper. The survival rate was particularly high on the rough side of the plastic wrapper. Ion cluster air sterilization is a labor-saving and effective method for suppressing the occurrence of Listeria bacteria on mushroom growers walls and shelves. For the plastic wrapper, chemical sterilization is more effective than physical sterilization.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.2
• /
• pp.29-38
• /
• 2021

According to the theory of concentration recovery(ART), experiencing landscapes with healing properties can heal human mental fatigue caused by intentional concentration. The ART illustrates four healing qualities of the landscape. ART admits that various landscapes can have healing properties, the four healing properties of the landscape explained that the greater the perceptual strength, the stronger the healing effect. Until now, research on healing landscapes has been mainly done on natural and urban landscapes. The purpose of this study is as follows. First, eIt is intended to evaluate the healing characteristics of the Yangdong village landscape using RCS and investigate the impact of the healing characteristics on the visiting preference of the target landscape. Second, Evaluating the landscape image of Yangdong Village landscape, Investigating the effect of landscape images on the healing properties of landscape. This study was conducted in Yangdong Village, Gyeongju, 127 college students participated in the survey. SD 16 items to analyze landscape images and RCS 22 items from Laumann(2001) to evaluate healing properties were used as measurement tools. The findings are summarized as follows. First, The landscape image of Yangdong Village was analyzed through SD method, the analysis of the factors of Yangdong Village landscape image results in two factors: place and singularity. Second, It demonstrates the reliability and validity of RCS, Three factors were extracted from the factor analysis results. Third, Landscape images have a positive effect on the three healing characteristics of RCS. Fourth, Three healing properties of RCS have been shown to have a positive effect on visiting preferences, The order of influence on the relative visiting preferences was analyzed as attractiveness, fit, sense of escape, and sense of space. The findings suggest that future work requires research to re-validate the reliability of RCS. It is also necessary to analyze landscape images for various landscape types to specifically understand the effects on healing characteristics.

• Journal of Korean Philosophical Society
• /
• v.116
• /
• pp.1-31
• /
• 2010

This Article studies a meaning of geometrical-mathematical spatial idea in the source of modern theories of space. Modern theories of space elucidated a relation of human and space through the geometrical terms; point, line, plane and extension etc. Descartes and Newton identified space as a natural realty, Leibniz and Kant elucidated space as a subjective idea or form. It is the result of modern spatial theories that space is lied nearly in human. In the meaning of natural space, space is empirically unfolded with a shape of measuring in front of human's eyes. In the meaning of cognitional space, space is a method or subjective cognitional form that human understands nature and constitutes world. Modern theories of space would be divided into four patterns. In Newton's theory space is absolutely prior to things. In Leibniz' theory space is a co-existence order of Monads. In Descartes's theory space is identified with extension. In Kant's theory space is cognitional form of subject. They all are confronted with each other in the source of space. In their confrontation they reflected on the relation of human and space in their own standpoint. We classify their particularly differential concepts of space into natural space and cognitional space. And then we analyze a difference of spatial meanings, and then investigate foundations of meaning of modern theories of space. On the one hand they are become to the source of alienation of human from space. But on the other they are contributed to get space familiar with human through a wakening for the correlation of human and space. The natural space indicates that with measurable shape space is extended really in front of human's experiential eyes. But the cognitional space elucidates that space is only a subjective idea or form with which human understands nature and constructs world. In the former it is embossed that space is independent to human, and is able to be measured and to be treated according to natural raws. In the latter it is evidenced that space is not separated to human, and that space is not without human, and a correlation existed between human and space. Humanist ideal is declared in them. It was a declaration of human sovereignty to nature. But this declaration is caused to alienate human beings from space.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.288-296
• /
• 2019

Radiation cooling has used ceilings or floors as cooling surfaces. In such cases, to avoid moisture condensation on the surface, the surface temperature needs be higher than the dew point temperature or an additional dehumidifier is added. In this study, with a goal for residential application, intentional moisture condensation on the cooling surface was attempted, which increased the cooling capacity and improved the indoor comfortness. This method included two separate refrigeration cycles - convection-type dehumidifying cycle and the panel cooling cycle. Test results on the panel cooling cycle showed that, at the standard outdoor ($35^{\circ}C/24^{\circ}C$) and indoor ($27^{\circ}C/19.5^{\circ}C$) condition, the refrigerant flow rate was 8.8 kg/h, condensation temperature was $51^{\circ}C$, evaporation temperature was $8.8^{\circ}C$, cooling capacity was 376 W and COP was 1.75. Furthermore, the panel temperature was uniform within $1^{\circ}C$ (between $13^{\circ}C$ and $14^{\circ}C$). As the relative humidity decreased, the cooling capacity decreased. However, the power consumption remained approximately constant. In the convection-type dehumidification cycle, the refrigerant flow rate was 21.1 kg/h, condensation temperature was $61^{\circ}C$, evaporation temperature was $5.0^{\circ}C$, cooling capacity was 949 W and COP was 2.11 at the standard air condition. When both the radiation panel cooling and the dehumidification cycle operated simultaneously, the cooling capacity of the radiation panel cycle was 333 W and that of the dehumidification cycle was 894 W, and the COP was 1.89. As the fan flow rate decreased, both the cooling capacity of the radiation panel and the dehumidification cycle decreased, with that of the dehumidification cycle decreasing at a higher rate. Finally, a possible control logic depending on the change of the cooling load was proposed based on the results of the present study.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.2
• /
• pp.20-29
• /
• 2019

The purpose of this study is to verify and reconstruct the record information for big old trees of Jeju on the basis of the precise map of Jeju island in 1918 which was produced 100 years ago. For the analysis of high altitude, coordinate system and georeferencing were performed by selecting representative points using ArcGIS. We extracted digitized information by using point extraction method and extracted attribute information based on legend type and relative size in map. Based on the map of the past 100 years ago, the present situation of the big old tree in Jeju was analyzed and their characteristics were analyzed. In addition, based on the information of the protected big old trees in present, we discussed the characteristics of past tree (1918), present tree (2019), and contribution of big old tree in Jeju landscape and vegetation. As a result, 1,013 individuals were distributed in Jeju Island 100 years ago. Even when it was intensive in the use of timber, the big old trees were protected, and contributed as a representative component of Jeju's unique landscape. The remaining distribution of Jeju's big old tree is 159 trees. As in the past, distribution has been confirmed around the lowlands, but declines in numbers are found throughout the island. The major factors for the decline of individuals are large-scale development projects such as reaching the limit of life, natural disturbance (typhoon, disease, pest, drought, etc.). However, it is presumed that a large number of individuals have played a leading role in shaping the current forests as contributing to important species sources in the restoration process of Jeju vegetation. However, it is presumed that a large number of individuals (405) have played a leading role in forming the present forest by contributing to the species pool in the restoration process of Jeju vegetation.

• Journal of vocational education research
• /
• v.37 no.3
• /
• pp.85-111
• /
• 2018

The purpose of this study is to derive the competence of nursing teacher in Specialized vocational high school. The knowledge, skills, and attitudes required for the nursing teachers were verified and the competency groups and sub-competencies were verified and priorities were suggested. To do this, 23 nursing teachers who were currently working in the Specialized vocational high school were selected as expert panels and the study was conducted using Delphi and Layered Analysis(AHP) technique. The results of this study were as follows. First, the competency group of the nursing teacher in Specialized vocational high school showed teaching and learning methods & techniques, student guidance, curriculum development and operation, school management support, industry-academy cooperation, self-development and professionalism improvement. The total number was 6. Second, the sub-competency is composed of knowledge and skills related to the curriculum, planning and preparation of instruction, instruction operation, guidance of experiment and practice, instruction evaluation, development and utilization of teaching and learning medium, instruction environment, guidance on student education activities outside the curriculum, career guidance, life guidance, class management, guidance of technology and qualification, development of school curriculum, organization and operation of school curriculum, planning and operation of field practice, work planning, school management support, teacher evaluation and personnel management support, leaning support(practice place and equipment), establishment and operation of industry-academia cooperation, strengthening community cooperation, public relations in the school(department), field research for improvement of educational activities, participation in conferences and training, exploration of new knowledge and technology, The total number was 26. The most important of the relative importance was the curriculum development and operation. The subordinate competencies that have a high priority in each competency group were guidance of experiment and practice, guidance of technology and qualification, planning and operation of field practice, leaning support(practice place and equipment), management and work planning, establishment and operation of industry-academia cooperation, exploration of new knowledge and technology. The competency system derived from this study will be applied to the training and evaluation of nursing teachers in the future and can be used as basic data for related research.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.393-399
• /
• 2018

A loop-mediated isothermal amplification (LAMP) primer set (WBPH-65) was designed for the species-specific detection of white-backed planthopper (WBPH) Sogatella furcifera based on the full-length sequence of the internal transcribed spacer 2 (ITS2) (KC417469.1). The WBPH-65 primer set consists of six primers (total 165 bp), F3 (18 bp), B3 (18 bp), FIP (43 bp), BIP (40 bp), LF (21 bp), and LB (25 bp). After the LAMP reaction of three rice planthoppers, S. furcifera, Nilaparvata lugens, and Laodelphax striatellus, with the WBPH-65 primer set for 60 min at $65^{\circ}C$, the LAMP products were observed in the genomic DNA of S. furcifera only. According to the DNA amount of S. furcifera and incubation duration at $65^{\circ}C$, the difference of fluorescence relative to the negative control (0 ng) was clearly observed in a 40-min incubation with 10 and 100 ng or in case of 60-min incubation with 0.01, 0.1, 1, 10, and 100 ng. There was little difference in fluorescence between the negative control and all the other DNAs tested in 20- and 30-min incubations. On the other hand, the WBPH-65 primer set without LF and LB primers showed little amplification in the genomic DNAs of the three rice planthoppers, S. furcifera, N. lugens, and L. striatellus in a 60-min incubation. These results suggest that all six primers (F3, B3, FIP, BIP, LF, and BF) are necessary for the WBPH-65 primer set to detect S. furcifera within a 60-min incubation, and is able to discriminate S. furcifera from at least N. lugens and L. striatellus.

• Journal of Chest Surgery
• /
• v.52 no.4
• /
• pp.248-329
• /
• 2019

Background: Though clinical practice guidelines (CPGs) for cardiac rehabilitation (CR) are an effective and widely used treatment method worldwide, they are as yet not widely accepted in Korea. Given that cardiovascular disease is the second leading cause of death in Korea, it is urgent that CR programs be developed. In 2008, the Government of Korea implemented CR programs at 11 university hospitals as part of its Regional Cardio-Cerebrovascular Center Project, and 3 additional medical facilities will be added in 2019. In addition, owing to the promotion of CR nationwide and the introduction of CR insurance benefits, 40 medical institutions nationwide have begun CR programs even as a growing number of medical institutions are preparing to offer CR. The purpose of this research was to develop evidence-based CPGs to support CR implementation in Korea. Methods: This study is based on an analysis of CPGs elsewhere in the world, an extensive literature search, a systematic analysis of multiple randomized control trials, and a CPG management, development, and assessment committee comprised of 33 authors-primarily rehabilitation specialists, cardiologists, and thoracic surgeons in 21 university hospitals and 2 general hospitals. Twelve consultants, primarily rehabilitation, sports medicine, and preventive medicine specialists, CPG experts, nurses, physical therapists, clinical nutritionists, and library and information experts participated in the research and development of these CPGs. After the draft guidelines were developed, 3 rounds of public hearings were held with staff members from relevant academic societies and stakeholders, after which the guidelines were further reviewed and modified. Results: CR involves a more cost-effective use of healthcare resources relative to that of general treatments, and the exercise component of CR lowers cardiovascular mortality and readmission rates, regardless of the type of coronary heart disease and type and setting of CR. Conclusion: Individualized CR programs should be considered together with various factors, including differences in heart function and lifestyle, and doing so will boost participation and adherence with the CR program, ultimately meeting the final goals of the program, namely reducing the recurrence of myocardial infarction and mortality rates.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.