• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1201-1206
• /
• 2003

A measurement device for gas flow rate using hot-wire module is developed for the utilization in low-accuracy industrial applications. The module has three wires of measuring and heating, and a bridge circuit is installed to detect electric current through the wire in the module. An amplification of the signal and conversion to digital output are conducted for the online measurement with a personal computer. In addition, temperature distribution in the module is numerically analyzed to examine the measured outcome from the module experiment. The flow rate of air and carbon dioxide gas is separately measured for the performance examination of the device. The experimental relation of measurement and flow agrees with the prediction from the numerical analysis. The outcome of the performance test indicates that the accuracy and reproducibility of the module is satisfactory for the purpose of industrial applications.

• 한국태양에너지학회 논문집
• /
• 제26권1호
• /
• pp.73-79
• /
• 2006

The integration of PV modules into building facades or roof could raise PV module temperature that results in the reduction of electrical power generation. Lowering operating temperature of PV module is important in this respect, and PV module temperature should be considered more accurately, for building-integrated PV(BIPV) systems in predicting their performance. This paper describes a BIPV solar roof design and verifies its performance through experiment In relation to the effect of ventilation in space between PV module and roof surface. The results showed that the ventilation in the space had a positive effect in lowering the module temperature of the BIPV solar roof that enhanced the performance of its electricity generation.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.279-283
• /
• 2014

In this paper, we present an economical and practical standard to install a bypass diode in a thin-film PV module. This method helps to reduce heat generation and to prevent module degradation due to excess current from reverse bias. The experimental results confirm that for different numbers of solar cells, there is a relation between the excess reverse current and the degradation of solar cells in a-Si:H modules. The optimal number of solar cells that can be connected per bypass diode could be obtained through an analysis of the results to effectively suppress the degradation and to reduce the heat generated by the module. This technique could be expanded for use in high power crystalline Si PV modules.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.379-382
• /
• 2010

This study proposes a way to validate BIM data quality in BIM applications. Solibri model checker is adopted as a module development platform, which is based on Java programming language. The platform makes application developers implement BIM model checker for their own purpose. This study has developed a BIM validation module for circulation analysis of building design. The validation module enables end-users to automatically detect data corrupted or not defined. In case studies, the module found that an IFC file generated from a BIM software has wrong relation information between a space and boundary elements. A building model should satisfy modeling requirements and then domain users can get analysis results. The BIM data validation module needs to be developed in each BIM application domain.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.67-71
• /
• 2009

본 논문에서는 우리나라에서 동일한 환경에 설치되어 있는 247.5kW bulk형 모듈과 a-Si형 모듈의 6월 발전량을 조사 분석하여 기상조건(일조량, 평균기온, 강수량, 운량, 풍속 등)과의 관계를 분석하고 최근 지구온난화 등으로 인한 기후변화에 따라 보다 고효율적인 모듈 산정방안을 제시하였다.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.75-82
• /
• 2009

본 논문에서는 우리나라에서 동일한 환경에 설치되어 있는 247.5[kW] bulk형 모듈과 a-Si형 모듈의 6월 발전량을 조사 분석하여 기상조건(일조량, 평균기온, 강수량, 운량, 풍속 등)과의 관계를 분석하고 최근 지구온난화 등으로 인한 기후변화에 따라 보다 고효율적인 모듈 산정방안을 제시하였다.

• 소프트웨어공학소사이어티 논문지
• /
• 제25권4호
• /
• pp.69-74
• /
• 2012

본 논문은 소프트웨어 클러스터링 기법과 커뮤니티 검출 기법의 비교를 통하여 아키텍쳐 모듈 복원 프로세스에 커뮤니티 검출 알고리즘의 적용가능성을 제시한다. 또한, 대표적인 클러스터링 알고리즘과 커뮤니티 검출 알고리즘의 값과 나눠진 모듈간의 상관관계와 차이점을 분석한다. 이를 통하여 커뮤니티 검출 알고리즘이 소프트웨어 아키텍쳐 모듈 뷰 복원에 활용되어질 수 있다는 몇 가지 근거를 제시하였고, 기존의 클러스터링 결과와 커뮤니티 알고리즘의 결과치를 비교함으로써, 서로의 결과 데이터가 어떠한 연관성을 가지는지 제시하였다.

• 대한건축학회논문집:구조계
• /
• 제35권8호
• /
• pp.177-184
• /
• 2019

Recently, electric power usages and peak loads from buildings are increasing due to higher outdoor air temperatures and/or abnormal climate during the summer period. As one of the eco-friendly measures, a renewable energy system has been received much attention. Particularly, interest on a photovoltaic (PV) system using solar energy has been rapidly increasing in a building sector due to its broad applicability. In using the PV system, one of important factors is the PV efficiency. The normal PV efficiency is determined based on the STC(Standard Test Condition) and the NOCT(Nominal Operating Cell Temperature) performance test. However, the actual PV efficiency is affected by the temperature change at the module surface. Especially, higher module temperatures generally reduce the PV efficiency, and it leads to less power generation from the PV system. Therefore, the analysis of the relation between the module temperature and PV efficiency is required to evaluate the PV performance during the summer period. This study investigates existing algorithms for calculating module surface temperatures and analyzes resultant errors with the algorithms by comparing the measured module temperatures.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1839-1849
• /
• 1989

An optimal variable assignment algorithm is presented as a decomposition method of MVL functions. A given 3-valued combinational logic function is disintegrated into subfunction composed of the function dependant relation, then extracted implicant output elements from subfunctions are assigned to a T-gates. As a circuit implementation tool, a programmable integarated T-gate module is proposed, and the construction procedure of combinational MVL functions is systematized in each step. This method is expected to give properties of the systematic procedure, possibility of T-gate number reduction, unification of module, and flexibility of module composition. Specially variable decomposition method can be pointed out as an approach to solving the limitation problem of the input and output terminal number in VLSI implementations.

• 대한수학회보
• /
• 제47권5호
• /
• pp.1053-1066
• /
• 2010

In this paper, several properties of endomorphism rings of modules are investigated. A multiplication module M over a commutative ring R induces a commutative ring $M^*$ of endomorphisms of M and hence the relation between the prime (maximal) submodules of M and the prime (maximal) ideals of $M^*$ can be found. In particular, two classes of ideals of $M^*$ are discussed in this paper: one is of the form $G_{M^*}\;(M,\;N)\;=\;\{f\;{\in}\;M^*\;|\;f(M)\;{\subseteq}\;N\}$ and the other is of the form $G_{M^*}\;(N,\;0)\;=\;\{f\;{\in}\;M^*\;|\;f(N)\;=\;0\}$ for a submodule N of M.