• 공업화학
• /
• 제10권4호
• /
• pp.563-567
• /
• 1999

용질배제율이 우수한 나권형 FT-30 폴리아미드 복합막을 상용하여 cephalosporin C를 농축하기 역삼투 농축실험을 하였다. $4{\sim}20kg/cm^2$의 압력과 100~1000 mg/L의 농도, 그리고 2.8과 5.6 L/min의 유속을 갖는 실험 조건하에서 cephalosporin C 수용액의 수투과율과 용질의 배제율 및 물질전달 계수를 구하였다. Cephalosporin C를 분리하는데 있어서 압력이 증가함에 따라 투과 플럭스가 증가하는 것으로 나타났다. 이 결과는 Kedem-Katchalsky 모델에서 예측한 것과 일치하였다. 그리고 배제율은 1에 가까웠다. 또한 공급액의 농도가 증가할수록 cephalosporin C의 배제율은 낮아지는 것으로 나타났다. 배제율은 고농도보다는 저온도에서 높게 나타났으나 그 감소 정도는 작았다.

• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.34-42
• /
• 2005

In this work, a practical separation performance was investigated on aqueous alcohol solutions, especially for iso-propyl alcohol (IPA), which is usually used during the semi- conductor rinsing process. The removal of various substances from waste aqueous IPA solutions was carried out by microfiltration with $0.1\~1{\mu}$m pore size of mean diameter as a pre-filter. Permeability and molecular weight cut-off of the functional polysulfone(PSf) ultrafiltration membrane to purify waste aqueous IPA solutions were measured through the ultrafiltration test. The solute rejection of PSf membrane had $92\%$ in 1,000ppm aqueous PEG solution with PEG molecular weight 10,000, the molecular weight cut-off had 10,000. The IPA concentration on the $CMPA-K^+$ membrane performance using pervaporation module system could be increased from $95.04 wt\%$ to more than $98.50wt\%$ in about 9hr at operation temperature of $70^{\circ}C$ using the pervaporation module system.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.56-63
• /
• 2009

In this study we have evaluated the separation characteristics and concentration of sericin using tubular type ultrafiltration membrane in silk degumming solution that extracted from electrolytic reduction water process. Ultrafiltration membranes have used in sericin separation performance and the separation characteristics of membrane satisfied typical Hagen-Poiseuille equation. It had the increase of flux according to the increase of feed pressure and temperature in occasion of pure water flux. And also the flux and solute rejection had about $25{\sim}60{\ell}/m^2{\cdot}h$ and more than 95% in sericin feed solution with concentration 1.00~1.89% at feed pressure force of $3{\sim}8kgf/cm^2$ respectively. In addition, the separation performance of tubular type ultrafiltration membrane for silk degumming solution was very steady-state with long experiment time.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.10-18
• /
• 2004

In this work, Aqueous sericin solution was prepared by degumming process with electrolytic reduction water. Then, the microfiltration and ultrafiltration systems were applied to the concentration of aqueous sericin solution. The objective of this study was to select the optimum operating condition among the different pressure. The permeate flux and rejection ratio were observed with time, pressure, flow rate and concentration. and, the wastewater and permeated water quality values such as pH, BOD, COD, and NH levels were measured. In order to see the influence of electrolytic reduction water, the flux of pure water and electrolytic reduction water by PVDF22(MF) and PS100(UF) membrane was measured. In microfiltration system, the relative flux reduction decreased rapidly to 0.02 in the 30min, as the concentration polarization and gel layer formation were increased. and then the sericin concentration rejection ratio was 40%. In ultrafiltration system, the permeate flux decreased with time and concentration, and increased with the operating pressure and flow rate. Optimal condition in PS100 membrane system for sericin concentration was operating pressure 1.464kgf/$cm^24, operating flow rate $7\ell/min at\; 40^{\circ}C$. At that time, sericin concentration rejection ratio was 83% respectably. The sericin solution was concentrated from 0.1wt% solution to 0.2 wt % solution during about 2 hrs by the UF filteration membrane system.

• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.251-263
• /
• 2014

The study contributes in the treatment of waste generated by the textile complex cotton of Draa Ben Khedda, Algeria. The azo dye "Direct Red Solophenyle 4GE" represents the base particle of the discharges and electrocoagulation with nanofiltration are used as a means of treatment. The solar photovoltaic is suitable for electrochemical process to reduce the energy cost. Several study parameters are considered in this work. The electrocoagulation batch gives the best reduction 37% for a dye concentration of 7.21 mg/L ($[NaCl]_{added}$=1g/L; $j=25.2mA/cm^2$). Coupling methods (electrocoagulation-nonofiltration) gives a complete discoloration rejecting concentration 52.4 mg/L (pHi = 7.6, $[NaCl]_{added}$=3g/L, $j=2.13mA/cm^2$). The result shows the coupling efficiency with a reduced amount of resulting slurry at the end of treatment.

• Membrane and Water Treatment
• /
• 제8권1호
• /
• pp.89-112
• /
• 2017

Dyeing wastewaters are the most problematic wastewater in textile industries and also, growing amounts of waste fibers in carpet industries have concerned environmental specialists. Among different treatment methods, membrane filtration processes as energy-efficient and compatible way, were utilized for several individual problems. In this research, novel hybrid membranes were prepared by waste fibers of mechanical carpets as useful resource of membrane matrix and industrial graphite powder as filler to eliminate Chrysophenine GX from dyeing wastewater. These membranes were expected to be utilized for first stage of hybrid membrane filtration process including (adsorption-ultrafiltration) and nanofiltration in Kashan Textile Company. For scaling of membrane filtration process, fouling mechanism of these membranes were recognized and explained by the use of genetic algorithm, as well. The graphite increased rejection and diminished permeate flux at low concentration but in high concentration, the performance was significantly worsened. Among all hybrid membranes, 18% wt. waste fibers-1% wt. graphite membrane had the best performance and minimum fouling. The maximum pore size of this optimum membrane was ranged from 16.10 to 18.72 nm.

• 한국의류산업학회지
• /
• 제25권4호
• /
• pp.460-471
• /
• 2023

This study aimed to analyze the consumption value and clothing pursuit benefits of genderless fashion based on gender identity. The study questionnaire was distributed to and collected from men and women in their 20s and 30s living in Seoul City and the Gyeonggi province. The collected data were analyzed by using Cronbachs α, factor analysis, K-means group classification analysis, and ANOVA. The study results were as follows. First, gender identity was categorized into three groups: the genderless group, the traditional gender rejection group, and the traditional gender acceptance group. Therefore, it is necessary to subdivide gender identity rather than acceptance and rejection of traditional gender roles. Second, an analysis of consumption value based on gender identity showed significant differences in terms of fashion value and expressive value. Therefore, it is important to establish a differentiated strategy based on the relevant gender identity group when establishing genderless fashion design or marketing strategy. Finally, the study results showed that clothing pursuit benefits based on gender identity, there was a significant difference in terms of individuality pursuit, deviation from the norm, and fashion pursuit. In particular, since the genderless phenomenon agrees with the characteristics of the MZ generation, it will be necessary to share brand information or product information through digital media or to utilize a sharing culture-that is, 'meaning out' tendency and 'flex culture' (i.e., conspicuous consumption).

• 대한화학회지
• /
• 제40권1호
• /
• pp.87-95
• /
• 1996

이성분계 rendom copolyeseters인 Poly(butylene succinate-co-butylene terephthalate)(PBS/PBT)를 합성하고 $^1H$ NMR spectroecopy를 이용하여 전 조성범위에 걸쳐 sepuence distribution을 조사하였다. PBS/PBT 공중합물의 융점(Tm)은 공중합물내 dimethyl terephthalate(DMT)의 함량이 증가함에 따라 점차적으로 감소하는 현상을 나타냈고 ST3(DMT 65.8mol%)에서 최저융점(eutetic point) 거동을 보였다. 이러한 공중합물의 융점거동은 공중합물의 몰분율(Xa)보다는 triad fraction으로 계산된 sequence propagation probability(P)에 더욱 의존하는 경향을 보였다. 또한 succinate unit(또는 terephthalate unit)의 함량이 많은 공중합물들은 terephthalate unit(또는 succinate unit)를 완전히 배제시키면서 단지 PBS(또는PBT)만의 결정을 형성하였다.

• 한국염색가공학회지
• /
• 제15권2호
• /
• pp.68-75
• /
• 2003

In this work, ultrafiltration(UF) membranes were prepared using polyethersulfone(PES). The polymer was dissolved in various solvent, such as N, N-dimethyl formamide(DMF), N,-dimethyl acetamide (DMAc), N,N-dimethyl sulfoxide(DMSO) and N-methyl-2- pynolidone(NMP). Each polymer solution was casted on the glass plate, and immersed into non-solvent bath. In this way finely porous UF membranes were prepared by phase inversion method. The cross sectional structure of PES membrane was asymmetric which was consist of sponge-like sublayer, finger-like toplayer, and active skin layer. From the solute rejection experiments, the molecular weight cut off of the prepared membrane in various solvent was evaluated 10,000 for DMF, 30,000 for DMAc, 50,000 for DMSO, and 10,000 for NMP respectively.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1379-1387
• /
• 2011

A PID-feedforward controller and Robust Internal-loop Compensator (RIC) based on reinforcement learning using random variable sequences are provided to auto-tune parameters for each controller in the high-precision position control of PMLSM (Permanent Magnet Linear Synchronous Motor). Experiments prove the well-tuned controller could be reduced up to one-fifth level of tracking errors before learning by reinforcement learning. The RIC compared to the PID-feedforward controller showed approximately twice the performance in reducing tracking error and disturbance rejection.