• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.615-620
• /
• 2015

DOB (Disturbance Observer) is an useful control method for estimating the disturbance applied to dynamic systems. Disturbance observer can be used to implement a robust control system to generate a control input for rejecting the disturbance, and it can be also used to estimate the disturbance to obtain information. The system that uses disturbance estimation is investigated for high performance control such as automatic door systems, walking robot and electric power steering system in vehicles. In this paper, a novel disturbance observer which is called disturbance and current observer for estimating load torque in the motor system is proposed. The difference between the DOB for disturbance rejection and DCOB is mathematically verified. Current and angular velocity are required for estimating the load torque of the motor in DOB. However, the DCOB can estimate load torque and current without current sensor. DCOB is designed based on modeling of the motor system. Appropriate Q-filter is selected and the applicability of DCOB is verified by simulation. The estimated disturbance and current of the electric motor can be verified without current sensor, as experiments of the actual motor system.

• Speech Sciences
• /
• v.10 no.1
• /
• pp.15-25
• /
• 2003

A laryngograph was developed to measure the open and closed movements of vocal folds in our laboratory. This study attempted to evaluate its performance by comparing its glottal data with that of the original laryngograph. Ten normal Korean adults Participated in the experiment. Each subject produced a sustained vowel /a/ for about five seconds. This study compared f0 values, contact quotients of the duration of closed vocal folds over one glottal pulse, and area quotients of the closed over open vocal folds derived from glottal waves using both the original and new laryngographs. Results showed that the mean and standard deviation of the two laryngographs were almost comparable with a correlation coefficient 0.662 but minor systematic shift below those of the original laryngograph was observed. The absolute mean difference converged into 1 Hz, which indicates a possibility of adopting some threshold of rejecting inappropriate pitch values beyond a threshold value. The contact quotient of the normal subjects came out slightly over the 50% in a citation speech. Finally, the area quotient converged into 1. We will pursue further studies on the abnormal patients in the future.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.65-74
• /
• 2003

For virtual reality, virtual manufacturing system, or simulation based design, we need to visualize very large and complex 3D models which are comprising of very large number of polygons. To overcome the limited hardware performance and to attain smooth realtime visualization, there have been many researches about algorithms which reduce the number of polygons to be processed by graphics hardware. One of these algorithms, occlusion culling is a method of rejecting the objects which are not visible because they are occluded by other objects, and then passing only the visible objects to graphics hardware. Existing occlusion culling algorithms have some shortcomings such as the required long preprocessing time, the limitation of occluder shape, or the need for special hardware implementation. In this study, an efficient occlusion culling algorithm is proposed. The proposed algorithm reads and analyzes Z-buffer of graphics hardware using Microsoft DirectX, and then determines each object's visibility. This proposed algorithm can speed up visualization by reading Z-buffer using DirectX which can access hardware directly compared to OpenGL, by reading only the region to which each object is projected instead of reading the whole Z-Buffer, and the proposed algorithm can perform more exact visibility test by using simplified model instead of using bounding box. For evaluation, the proposed algorithm was applied to very large polygonal models. And smooth realtime visualization was attained.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.10
• /
• pp.562-570
• /
• 1999

In the industrial motor drive system which is composed of a motor and load connected with a flexible shaft, a torsional vibration is often generated because of the elastic elements in torque transmission. This vibration, which is generated in a two-mass mechanical system. To solve this problem, recently there has been a lot of researches for the robust control relevant to the $H_{\infty}$ control suppressing the torsional vibration and rejecting the torque disturbance. In the case of the $H_{\infty}$controller, however, the command tracking property becomes worse because of overshoot during transient response. For this reason the $H_{\infty}$ controller, which includes the two-degrees-of-freedom(TDOF) controller, is designed in order to improve command tracking property. However, it also includes complexity realizing this controller. In this paper, a new $H_{\infty}$ controller with partial state feedback is proposed. Proposed $H_{\infty}$controller has simple structure but satisfies with the fast command tracking property and the attenuation of disturbances and vibrations simultaneously, just like the complicated TDOF $H_{\infty}$ controller.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.759-766
• /
• 2009

The purpose of this paper is an image processing algorithm development as a base research achieving performance enhancement of integrated navigation system. We used the SIFT (Scale Invariant Feature Transform) algorithm for image processing, and developed feature point matching filter for rejecting mismatched points. By applying the proposed algorithm, it is obtained better result than other methods of parameter tuning and KLT based feature point tracking. For further study, integration with INS and algorithm optimization for the real-time implementation are under investigation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.84-90
• /
• 2004

Many control techniques have been proposed in order to improve the control performance in the control system. In the feedback control system the output of controller is generally used as the input of a plant But the undesired noise is included in the output of a controller. Therefore, there is a need to use a precompensator for rejecting the undesired noise and improving the response characteristic of a system. In this paper, the design method of a precompensator is proposed for the model following control in the I-PD control system. The proposed precompensator is implemented with a neural network. The games of a precompensator are adjusted automatically to obtain a desired response of a system when the response characteristic of a system is changed under a condition.

• Korean Journal of Remote Sensing
• /
• v.19 no.1
• /
• pp.61-70
• /
• 2003

This paper proposes an autonomous approach to localize the center of fiducial marks included in aerial photographs without precise geometric information and human interactions. For this localization, we present a conceptual model based on two assumptions representing symmetric characteristics of fiducial area and fiducial mark. The model makes it possible to locate exact center of a fiducial mark by checking the symmetric characteristics of pixel value distribution around the mark. The proposed approach is composed of three steps: (a) determining the symmetric center of fiducial area, (b) finding the center of a fiducial mark with unit pixel accuracy, and finally (c) localizing the exact center up to sub-pixel accuracy. The symmetric center of the mark is calculated tv successively applying three geometric filters: simplified ${\nabla}^2$G (Laplacian of Gaussian) filter, symmetry enhancement filter, and high pass filter. By introducing a self-diagnosis function based on the self-similarity measurement, a way of rejecting unreliable cases of center calculation is proposed, as well. The experiments were done with respect to 284 samples of fiducial marks composed of RMK- and RC-style ones extracted from 51 scanned aerial photographs. It was evaluated in the visual inspection that the proposed approach had resulted the erroneous identification with respect to only one mark. Although the proposed approach is based on weak constraints, being free from the exact geometric model of the fiducial marks, experimental results showed that the proposed approach is sufficiently robust and reliable.

• Cross-Cultural Studies
• /
• v.52
• /
• pp.393-416
• /
• 2018

Negative Stripping Construction in English involves the disjunction but, the adverb not, and a constituent NP. This construction is an incomplete sentence although it delivers a complete sentential meaning. Interpretation of this construction may be ambiguous in that the constituent NP can either be construed as the subject, or as the complements including the object. To generate such sentences and resolve the issue of ambiguity, we propose a construction-based analysis under direct interpretation approach, rejecting previous analyses based on deletion approaches. In so doing, we suggest a negative stripping construction rule that can account for ambiguous meaning. This rule further can enable us to explain syntactic structures and readings of Negative Stripping Construction.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.835-845
• /
• 2019

This paper presents a robust-optimal control strategy to improve the output-voltage error-tracking and control capability of a DC-DC boost converter. The proposed strategy employs an optimized Fractional-order Proportional-Integral (FoPI) controller that serves to eliminate oscillations, overshoots, undershoots and steady-state fluctuations. In order to significantly improve the error convergence-rate during a transient response, the FoPI controller is augmented with a pre-stage nonlinear error-modulator. The modulator combines the variations in the error and error-derivative via the signed-distance method. Then it feeds the aggregated-signal to a smooth sigmoidal control surface constituting an optimized hyperbolic secant function. The error-derivative is evaluated by measuring the output-capacitor current in order to compensate the hysteresis effect rendered by the parasitic impedances. The resulting modulated-signal is fed to the FoPI controller. The fixed controller parameters are meta-heuristically selected via a Particle-Swarm-Optimization (PSO) algorithm. The proposed control scheme exhibits rapid transits with improved damping in its response which aids in efficiently rejecting external disturbances such as load-transients and input-fluctuations. The superior robustness and time-optimality of the proposed control strategy is validated via experimental results.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.4-35
• /
• 2000

The paddling technique is a Kind of secondary treatments in the process of ceramic forming, which appeared in the Chinese Neolithic Age pottery making. In the case of Korean prehistoric pottery making, it was first introduced together with the kiln firing method from Tongpei region(東北地方) of China in Yan(燕) dynasty occupation period. Korean archaeologists have recognized the adoption of the new technologies as a drastic innovation of ceramic production. And most of them have thought that the diffusion of new techniques, accompanied by the migration of the northern ethnic groups, had been immediately followed by the innovative changes in pottery procdution. However, rejecting the arguments from the simple diffusionist viewpoint, I have first tried to describe the innovation processes in the ceramic production systems as a spatio-temporal process. The paddling technique by the cord-wound paddle, which was first introduced among the various paddles, was associated with the new sort of pottery, round pots fired in low temperature of reducing atmosphere condition. The cord-marked round pots first tried by the indigenous potters in the southern part of Korean were characterized by the relatively low leveled techniques in forming and firing, compared to those of north-east China. The techniques of the round pots were hardly improved in the domestic production system until the appearance of the fully-specialized one. The specialized production system of the round pot, which appeared first in the mid-western region of Korea, showed the diversified paddling techniques and made the noticeable improvements in forming and firing processes.