• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.5-12
• /
• 2012

Recently the installation of reinforced earth retaining walls in the domestic construction site has increased, surpassing conventional RC walls. These reinforced walls have various types depending on the reinforcing material, installation method and the form of face panel. However, there are difficulties in design and construction management due to the unproved safety of construction method. In case of reinforcing materials, despite the fact that they come in all different sizes and types produced by small businesses or partially imported with cheap price and low quality, no proper standards for designing the walls have been suggested. In order to apply reinforced retaining wall system to broad cases and design the walls effectively considering site conditions, specific design and construction guidelines for efficient construction management are needed. In conclusion, this study verified that reduction factors can be greatly affected by grain sizes and stiffness of backfill materials and granularity range, therefore in case of relatively large construction site, it is required to redesign the reinforced retaining wall by evaluating site installation resistance test, applying respective reduction factors to each backfill material and select the right geogrid depending on the usage of retaining wall so as to enhance the safety of reinforced earth retaining walls with efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.243-250
• /
• 2020

In this paper, we propose an effective software education scheme for universities. The key idea of this software education scheme is to analyze software curriculum of QS world university rankings Top 10, SW-oriented university, and regional main national university. And based on the results, we propose five improvements for the effective SW education method of universities. The first is to enhance the adaptability of the industry by developing courses based on the SW developer's job analysis in the curriculum development process. Second, it is necessary to strengthen the curriculum of the 4th industrial revolution core technologies(cloud computing, big data, virtual/augmented reality, Internet of things, etc.) and integrate them with various fields such as medical, bio, sensor, human, and cognitive science. Third, programming language education should be included in software convergence course after basic syntax education to implement projects in various fields. In addition, the curriculum for developing system programming developers and back-end developers should be strengthened rather than application program developers. Fourth, it offers opportunities to participate in industrial projects by reinforcing courses such as capstone design and comprehensive design, which enables product-based self-directed learning. Fifth, it is necessary to develop university-specific curriculum based on local industry by reinforcing internship or industry-academic program that can acquire skills in local industry field.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.45-52
• /
• 2015

Fiber-reinforced polymer (FRP) has been generally accepted by civil engineers as an alternative for steel reinforcing bars (rebar) due to its advantageous specific tensile strength and non-corrosiveness. Even though some glass fiber reinforced polymer (GFRP) rebars are available on a market, GFRP is still somewhat uncompetitive over steel rebar due to their high cost and relatively low elastic modulus, and brittle failure characteristic. If the price of component materials of GFRP rebar is not reduced, it would be another solution to increase the performance of each material to the highest degree. The tensile strength generally decreases with increasing diameter of FRP rebar. One of the reasons is that only fibers except for fibers in center resist the external force due to the lack of force transfer and the deformation of only outer fibers by gripping system. Eliminating fibers in the center, which do not play an aimed role fully, are helpful to reduce the price and finally FRP rebar would be optimized over the price. In this study, the effect of the hollow section in a cross-section of a GFRP rebar was investigated. A GFRP rebar with 19 mm diameter was selected and an analysis was performed for the tensile test results. Parameter was the ratio of hollow section over solid cross-section. Four kinds of hollow sections were planned. A total of 27 specimens, six specimens for each hollow section and three specimens with a solid cross-section were manufactured and tested. The change by the ratio of hollow section over solid cross-section was analyzed and an optimized cross-section design was proposed.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.297-309
• /
• 2012

Different amounts of foaming agents were employed in natural rubber(NR)/butadiene rubber(BR) blends to understand the foaming behavior in presence of nano-reinforcing agent, zinc methacrylate (ZMA). The ZMA greatly improved most of the mechanical properties of the rubber foams, however it did not show considerable effect on the cell morphology, such as cell size, density and porosity. It was also observed that the foaming agent concentration affected all the mechanical parameters. When the content of foaming agent was increased, the number of foams was increased leading to a decrease in density of the compounds. But the size and distribution of foams remained unchanged with increased foaming agent. The effect of high styrene-butadiene rubber (HSBR) was also studied. The size of cells became smaller and the cell uniformity was improved with increasing HSBR. The foam rubber compounds showed much efficient energy absorbing capability at higher strains.

• The Korean Journal of Archival Studies
• /
• no.39
• /
• pp.45-72
• /
• 2014

In the recent years, Gov.2.0, which strengthens not only a claim for freedom of information but also sharing public information, became a new paradigm of government operations. In line with the paradigm the Korean government promotes the Gov.3.0 policy. This study exams the freedom of information system, which expends its roles and responsibilities for enhancing the usage of public information in the Gov.3.0 era. Furthermore, it analyzes the system's usability from the perspective of users. The freedom of information system is the fundamental portal for all the public information's disclosure and usage. Without providing the solution for problems of the system, the Korean government's Gov3.0 policy cannot succeed. Also, Park Geun-hye Government's Gov.3.0 initiatives which consists of tasks, such as reinforcing freedom of information, immediate releasing original documents, and expending public access to information, should be done through the freedom of information system. The importance of the system is increasingly heavy. It is not only the simple online contact point for public information, but also a public sphere for sharing public raw data and for implementing the Gov.3.0 vision. However, the current system still does not slove it problems. This study analyzes the system's problems in terms of usability and sustainability. As a result, it provides three alternative strategies for the freedom of information system, including 'personnel and financial support expansion', 'strengthening user-friendly operating' and 'establishing long-term strategies for system improvement.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.419-426
• /
• 1999

In this study, the reaction rate constant, activation energy, total crosslinking density, elastic constant, cure properties ($t_5,\;t_{90}$), modulus, and abrasion resistance of rubber compounds were investigated as a function of cure temperatures, cure systems and reinforcing filler loadings. Reaction rate constants showed strong dependence on thc carbon black loading, cure temperature and cure system, and increased sharply with increasing the reaction temperatures. The lowest activation energy was obtained in the efficient cure (EC) system which corresponds to the high level of sulfur to accelerator ratio, and the activation energy was decreased with decreasing the carbon black loadings. The change of carbon black loadings directly affects the modulus and abrasion resistance, but the change of cure system showed various effects on the rubber compounds. Increased carbon black loadings showed the high modulus, improved abrasion resistance and short scorch time but decrease in crosslinking density and elastic constant. Higher crosslinking density and elastic constant were shown in the EC cure system regardless of carbon black loadings, but scorch timc ($t_5$) was not affected by the change of the ratio of sulfur to accelerator. Rapid optimum cure time ($t_{90}$) were showen in the EC cure system. Also, the equivalent cure curve coefficient of rubber compound was 0.96 for conventional cure (CC) system, and 0.94 for semi-efficient cure (SEC) and EC system regardless carbon black loadings. As regarding the abrasion resistance, wear volume showed the logarithmic increase for the loaded weight.

• Korean System Dynamics Review
• /
• v.12 no.2
• /
• pp.69-94
• /
• 2011

Daejeon, encompassing Daedeok Science Town and Daedeok Innopolis, possesses the advantage of portraying relatively higher regional innovation capacity and facilitating network formation among regional professional research organizations. Applying the Social Network Analysis(SNA) techniques, this paper focuses on divulging structural and spatial characteristics of the Daejeon Information and Communication(ICT) industry network, analyzing co-research projects implemented by the Daejeon-based universities. For the analytical tool, it depends on NETMINER 3.0. Furthermore, based on the Systems Thinking approaches, this study suggests a couple of policy implications. Judging from the Korea Standard Industrial Classification principles, the existing ICT industry is subdivided into 11 sub-industries. The highest degree centralization value comes from the Mobile Communication sub-industry(188.668%), indicating that Mobile Communication sub-industry exerts the most significant impact on the regional innovation networking in Daejeon. Among various stakeholders, Korea Advanced Institute of Science and Technology(KAIST) records the top ranking in most categories, conspicuously leading the institute-industry linkage. In terms of the ICT spatial distribution, the intra-regional cooperation examples present the strongest linkage values, followed by Daejeon-the Capital Region ones. Finally, as well shown in a series of causal loop analyses, this study recommends that Daejeon should put top policy priority in strengthening the internal ICT network within Daejeon proper. Here, Daejeon should keep in mind the fact that there exist reinforcing loops between Daejeon's attractiveness and the entering of new ICT firms.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.4
• /
• pp.131-147
• /
• 2007

As overweight and obese people have increased, obesity management programs have generated much concern in Korea. Many types of obesity management programs were operated, aimed at reducing weight, BMI, body fat percentage and so on. This study was conducted to review the features of studies in obesity management programs and systematically assess the effects which were published from 1995 to 2006 in Korea. Databases were systematically searched for published data in Korea. It were KISS (Korean studies information services system) and KERIS (Korean Education research information system), which were major literature search systems for all academic fields in Korea. Total 114 studies were initially identified, of which 21 satisfied our inclusion data. The effects of obesity management programs were assessed on the results in weight, BMI (body mass index), HDL (high density lipids), body fat percentage, self-efficacy. Effect size estimated on the equation of M1 - M2 / Sp, where M1 was mean of the experimental group, M2 was the mean of control group, and Sp was the pooled standard deviation. Magnitude of effect size was interpreted by using Cohen's definition. Cohen described small, medium, and large effect sizes as 0.2, 0.5, and 0.8 respectively. The studies about obesity management programs were the most published in 2005(26.1%). Obesity management programs were popularly operated as the type of 12 weeks intervention, exercise intervention(52.4%), quasi-experimental study(85.7%). Ten studies reported significant effects on weight, and nine studies reported significant effects on BMI and HDL. Only five and three studies reported significant effects on body fat percentage and self-efficacy respectively. The effects of each outcome were generally significant when the studies included these elements, intervention over 10 weeks, evaluation over 3 times, a comprehensive program (exercise, nutrition education, behavior modification) and reinforcing factors (self-monitoring, group discussion, one's goal setting, and etc.). Effective obesity management programs should contain these essential elements and objectives of obesity management programs must be set out evident at the beginning. The participants should be registered, educated and evaluated by continuous obesity management programs.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.174-181
• /
• 2018

Purpose: The purpose of this study is to develop and demonstrate the customized modernization technology of the old aged hydropower generation system in operation Method: The modernization design was carried out based on the daily, weekly, monthly, and yearly information of the power plant in operation at the site. Results: In this paper, a safety diagnosis of existing facilities located in the Philippiness was carried out in accordance with the Special Act on the Safety Management of Domestic Facilities, and a method for reinforcing the facilities was selected. Conclusion: The selection of wheel suitable for the local environment and the maintenance of the old facilities were designed by domestic repair/reinforcement technology.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.4
• /
• pp.756-763
• /
• 2002

We have previously demonstrated that repeated injections of nicotine produced an increase in locomotor activity, dopamine(DA), release and c-Fos expression in the nucleus accumbens, one of the major projection areas of the central DA system. Acupuncture as a therapeutic intervention is widely used for the treatment of many functional disorders such as substance abuse and mental dysfunction. And many studies have shown that Coptidis Rhizoma has a suppressive effect on the central nervous system (CNS) and can affect the neurotransmitter systems in the CNS. In order to investigate whether acupuncture and Coptidis Rhizoma have an influence on nicotine-induced reinforcing and behavioral effects, we examined the effect of zusanli(ST36) and Coptidis Rhizoma on repeated nicotine-induced locomotor activity, and zusanli(ST36) on c-Fos expression as an important maker of postsynaptic neuronal activity in nucleus accumbens. Male SD rats received Coptidis Rhizoma (100mg/kg, p.o.) 30 min before injections of nicotine (0.4 mg/kg, s.c.) for 7 days. Rats were followed withdrawal for 3 days and one challenge for 1 day. Systemic challenge with nicotine produced a much larger increase in locomotor activity. Pretreatment with acupuncture at zusanli(ST36, 100Hz) and Coptidis Rhizoma decreased in nicotine-induced locomotor activity. These results demonstrated that reduction in locomotor activity by acupuncture at zusanli(ST36, 100Hz) and Coptidis Rhizoma may be mediated by reduction of dopamine release. Our results suggest that acupuncture at zusanli(ST36, 100Hz) and Coptidis Rhizoma may have therapeutic effect on nicotine addiction.