• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.172-178
• /
• 2021

In the ship repair market, interest in maintenance and repair is steadily increasing due to the reinforcement of prevention of environmental pollution caused by ships and the reinforcement of safety standards for ship structures. By reflecting this effect, the number of requests for repairs by foreign shipping companies increases to repair shipbuilders in the Southwest Sea. However, because most of the repair shipbuilders in the southwestern area are small and medium-sized companies, it is difficult to lead to the integrated synergy effect of the repair shipbuilding companies. Moreover, the infrastructure is not integrated; hence, using the infrastructure jointly is a challenge, which acts as an obstacle to the activation of the repair shipbuilding industry. Floating docks are indispensable to operating the repair shipbuilding business; in addition, most of them are operated through renovation/repair after importing aging caisson docks from overseas. However, their service life is more than 30 years; additionally, there is no structure inspection standard. Therefore, it is vulnerable to the safety field. In this study, the finite element analysis program of ANSYS was used to evaluate the structural safety of the modified caisson dock and obtain additional structural reinforcement schemes to solve the derived problems. For the floating docks, there are classification regulations; however, concerning structural strength, the regulations are insufficient, and the applicability is inferior. These insufficient evaluation areas were supplemented through a detailed structural FE-analysis. The reinforcement plan was decided by reinforcing the pontoon deck and reinforcement of the side tank, considering the characteristics of the repair shipyard condition. The final plan was selected to reinforce the side wing tank through the structural analysis of the decision; in addition, the actual structure was fabricated to reflect the reinforcement plan. Our results can be used as reference data for improving the structural strength of similar facilities; we believe that the optimal solution can be found quickly if this method is used during renovation/repair.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.305-321
• /
• 2022

The stone chamber tomb in Eungpyeong-ri, Buyeo, is a joint tomb that contains the bodies of two individuals. This paper investigates the relationship between the buried persons and the characteristics of the stone chamber tomb. Based on the geographical location, relics, and the excavated human bones, it was determined that the tomb was built during the Sabi Period of the Baekje Dynasty and that the buried individuals were most probably residents of high stature or government officials. To study the excavated bones, the remains were carefully collected and conservation was carried out. Before collecting samples from the human bones for the analytical research, the results of near-infrared analysis were used to collect the samples for the isotope analysis and DNA analysis. The most important issue when handling the excavation site was the reinforcing agent and the concentration of the agent used. In situations like this, Paraloid B-72 is the most suitable agent. When the shape of human bones was difficult to distinguish from the soil, conservation was performed using X-ray and CT imaging data. The same chemical used for the reinforcement of the site was used to complete a minimum level of conservation to the surface areas where the conservation treatment of removing foreign substances, the reinforcement areas, and bonded areas were carried out. The collagen yield from the sample obtained at selected position was 3.8% to 6.1%. The results of analyzing the stable isotopes of carbon and nitrogen found in the extracted collagen showed that the stable isotope ratios came out to δ¹³C -18.3‰±0.1‰, -19.0‰±0.1‰ for EBW and δ¹⁵N 10.7‰±0.5‰, 10.6‰±0.1‰ for EBE. It is believed the two individuals consumed small amounts of minor cereals, mainly from C₃ plants, and protein was obtained from eating terrestrial animals. What's more, the deviations in data obtained from the two individuals were so small that it could be inferred that the individuals ate similar foods. Considering the preservation state of the sample, amplifying DNA for the DNA analysis would have been very difficult since the amount of surviving DNA was so deficient. For DNA analysis, it is anticipated that the results could be derived by applying improved extraction methods that will be developed in the future. In this research, any association between scientific analysis(DNA and stable isotope ratio) and near-infrared spectroscopy was difficult to establish. Further research is needed on the utilization of near-infrared analysis for gathering samples from human bones.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.168-184
• /
• 2022

This paper examined the construction techniques of the earthen fortifications in the Hanseong Period of Baekje Kingdom, which has been researched most frequently among the Three Kingdoms. The construction processes of the Earthen Fortifications were reviewed and dividing into 'selection of location and construction of the base', 'construction of the wall', and 'finish, extension and repair'. The results show that various techniques were mobilized for building these earthen fortifications. Techniques which were adequate for the topography were utilized for reinforcing the base, and several other techniques were used for constructing the wall. In particular, techniques for wall construction may be clearly divided into those of the fill(盛土) and panchuk(版築) techniques. The fill method has been assumed since the 2000s to have been more efficient than the panchuk technique. This method never uses the structure of the panchuk technique and is characterized by a complex soil layer line, an alternate fill, use of 'earth mound(土堤)'/'clay clod(土塊)', and junctions of oval fill units. The fill method allows us to understand active technological sharing and application among the embankment structures in the period of the Three Kingdoms. The panchuk technique is used to construct a wall using a stamped earthen structure. This technique is divided into types B1 and B2 according to the height, scale, and extension method of the structure. Type B1 precedes B2, which was introduced in the late Hanseong Period. Staring with the Pungnap Earthen Fortification in Seoul, the panchuk technique seems to have spread throughout South Korea. The techniques of the fill and panchuk techniques coexisted at the time when they appeared, but panchuk earthen fortifications gradually dominated. Both techniques have completely different methods for the soil layers, and they have opposite orders of construction. Accordingly, it is assumed that both have different technical systems. The construction techniques of the earthen fortifications began from the Hanseong Period of Baekje Kingdom and were handed down and developed until the Woongjin-Sabi Periods. In the process, it seems that there existed active interactions with other nations. Recently, since studies of the earthen fortifications have been increasing mainly in the southern areas, it is expected that comparative analysis with neighboring countries will be done intensively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.337-347
• /
• 2021

This study is a qualitative study conducted to provide basic data for therapists working in long-term care hospitals to improve their countermeasure strategies for new infectious diseases and improvement of the treatment room infection management system, and to help therapists understand their infection management work. Colaizzi's phenomenological research method was applied as the research method. Telephone interviews were conducted with nine occupational therapists and physical therapists working in nursing hospitals. The contents of the interview were recorded with the consent of the study subjects, and additional confirmation was received by email. The recorded content was analyzed after transcription, and the meaning and nature of the experience coping with COVID-19 were described. The content was organized into 6 themes, 17 main meaning and 49 meaning units. In accordance with the COVID-19 situation, the infection control system has been strengthened by reinforcing infection control education in nursing hospitals, practicing infection control, and supervising infection control outside business hours. It was found that the treatment environment was changed due to the restriction of treatment activities by practicing distancing in the treatment room, adjusting rest and meal times during working hours, and strengthening infection control. In addition, the therapist's role has been expanded and the paradigm of treatment has changed, such as considering the untact intervention, and they have experienced cohort quarantine, pre-tested for COVID-19, vaccinations, and side effects from COVID-19. However, due to the infection work, the therapist's work burden is increased, and the person is experiencing fear, depression, and work stress from the spread of COVID-19. They were also aware of the need for nursing hospital care personnel support, such as guaranteeing rest after vaccination and providing infection control tools and equipment. The results of this study are expected to be used as basic data for human and physical support for the development of infectious disease response strategy programs in nursing hospital treatment rooms and for infection control in nursing hospitals.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.407-426
• /
• 2020

The purpose of this study was to make convergent and combined analysis of the sport industry and exercise rehabilitation in the era of New Normal based on the Fourth Industrial Revolution and devise a comprehensive plan for future activation. For this purpose, literature review was performed mainly by analyzing the environment of the sport industry in the New Normal era based on the Fourth Industrial Revolution and by carrying out convergent and combined analysis of the sport industry to present a convergent and combined activation plan for exercise rehabilitation comprehensively as follows: First, it is necessary to make a strategy of promoting exercise rehabilitation in convergent and combined ways at the sport industry level. This means development of a convergent and combined exercise rehabilitation-tourism-ICT model as well as a convergent and combined exercise rehabilitation-ICT model through collaboration among ministries, including those of health and sports. Second, it is necessary to convert into a convergent and combined way of thinking and extend and reinforce educational competitiveness in the area of exercise rehabilitation. That is, it is necessary to refine the education and training systems for reinforcing personal ICT competence of exercise rehabilitation majors and relevant ones and provide convergent and combined business commencement education. Third, it is necessary to make different types of research and development by applying practical, convergent and combined skills based on the industrial field to exercise rehabilitation and relevant areas. Efforts should be made to overcome any risk in the era of New Normal and support business commencement with convergent and combined skills for exercise rehabilitation. Fourth, it is necessary to make mid- and long-term clusters where exercise rehabilitation and relevant businesses can be accumulated. This means building an industrial hub and complex for exercise rehabilitation and requires making an R&D-based cluster with industrial-academic-governmental collaboration, maximizing the synergy effects with local infrastructures, and fulfilling the function of realizing a spontaneous profit-generating structure.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.305-319
• /
• 2020

A The purpose of this study was to determine the present state of the exercise rehabilitation field, promote elderly sport for all, and present a revitalization program for higher quality of life for the elderly in the coming era of the Fourth Industrial Revolution and aged society. Literature review was performed to analyze the actual conditions of the activities for elderly sport for all and the relevant field of exercise rehabilitation, analyze the elderly health and welfare and elderly sport for all programs, and present a plan for revitalizing the field of exercise rehabilitation to promote elderly sport for all. First, it is necessary to reinforce the awareness and promotion of the need and importance of exercise rehabilitation in inducing seniors to participate in sport for all. Second, it is necessary to make it compulsory to place sport leaders for seniors at such places as elderly leisure and welfare centers and promote expertise in managing elderly health guidance efficiently through cooperation with welfare workers. Third, it is necessary to make it compulsory to take exercise rehabilitation and similar subjects in the curriculums of sport for all, elderly sport welfare, and silver welfare sport as well as the subject of volunteering activities at such places as elderly leisure and welfare centers with the aim of giving opportunities for career choice. Fourth, it is necessary to develop characterized exercise rehabilitation programs at senior welfare centers, community centers for the elderly, and elderly classes and employ experts equipped with exercise event and exercise rehabilitation capabilities as itinerant lecturers to contribute to the government's job creation policies through cooperation between the Ministry of Culture, Sports, and Tourism (MOCST) and the Ministry of Health and Welfare (MOHW). Fifth, it is necessary to make a greater investment in research and development required for elderly sport for all. Sixth, it is necessary to develop and distribute various exercise rehabilitation treatment videos and guidelines that seniors can use for themselves. This is associated with the fifth one; in particular, it is urgent to devise measures against Coronavirus 19. Seventh, it is necessary to reduce inefficiency and budget waste caused by overlapped tasks by establishing a new elderly sports promotion organization through adjustment by MOCST and MOHW; it is also necessary to increase the functions of organization establishment with the aim of reinforcing the education area, which involves post-retirement health care, exercise rehabilitation, safety accident prevention, and virus.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.373-383
• /
• 2022

Inflammation caused by active oxygen and the resulting barrier damage have been consistently pointed out as the cause of wrinkle formation. In this study, effective index ingredient search and efficacy analysis were performed to verify the value of use as a functional cosmetic material related to antioxidant, anti-inflammatory and skin barrier improvement, and anti-aging for extracts of four types of Eleutherococcus divaricatus var. chiisanensis (ED), Eleutherococcus senticosus (EN), Eleutherococcus sessiliflorus (ES), and Eleutherococcus sieboldianus (EI) belonging to the Eleutherococcus genus. To identify the effective index composition, the content of the ingredients was measured by high-performance liquid chromatography. The content of eleutheroside E and chlorogenic acid was the highest in ED among the Eleutherococcus genus. As for anti-oxidant activity, DPPH radical scavenging activity was the highest in ED. In anti-inflammatory effects, ED extracts inhibited nitric oxide generation in inflammatory macrophage cells due to lipopolysaccharide by 40% at 100 ㎍/mL. In the case of IL-6 inhibition, which is known as a pro-inflammatory cytokine, ED showed 41% inhibition at 100 ㎍/mL. In addition, filaggrin and involucrin, which are skin barrier-related factors, were increased by 2.5 times and 1.6 times, respectively, in 100 ㎍/mL of ED extracts, and as for the collagenase, which is a wrinkle-related factor, ED extract showed 29% efficacy at 100 ㎍/mL. Thus, these result suggested that ED extract, among the four Eleutherococcus genus, can be used as a cosmetic ingredient for suppressing inflammation in the skin, reinforcing the skin barrier, and reducing wrinkles.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.15-25
• /
• 2023

In this study, silicon sludge from semiconductor dicing process is recycled to fabricate silica nanoparticles, which are applied as dispersing materials for electro-responsive (ER) smart fluid. In specific, metal impurities are removed from silicon sludge by acid washing to obtain the high-purity silicon powder. And then, silica nanoparticles are synthesized by facile hydrothermal method employing the silicon powder as reactant material. To control the size of silica nanoparticles, the reaction time of hydrothermal method is varied as 8, 15, 20, and 30 hours are applied to control the size of silica nanoparticles. Sizes of silica nanoparticles are increased proportionally to the reaction time owing to the increased numbers of hydrolysis and condensation reactions. As-synthesized silica nanoparticles are prepared as electro-responsive smart fluids by dispersing into silicon oil. Silica nanoparticles synthesized by 30 hours of hydrothermal reaction (SiO₂-H30) exhibit the highest shear stress of 21.4 Pa under an applied electric field strength of 3.0kV mm^-1. Such enhancement in ER performance of SiO₂-H30 among various silica nanoparticles are attribute to the reinforcing effect originated from the mixed particle size, which allowing the formation of rigid chain-like structures. Accordingly, this study successfully propose a recycling method of silicon sludge to synthesize silica nanoparticles and their derived ER fluids, which may suggest new possibility to ESG management emphasizing the eco-friendliness.