• International Journal of Concrete Structures and Materials
• /
• v.11 no.1
• /
• pp.171-183
• /
• 2017

Strengthening reinforced concrete (RC) beams with openings by using aramid fiber reinforcement polymers (AFRP) on the beams' surfaces offers a useful solution for upgrading concrete structures to carry heavy loads. This paper presents a repairing technique of the AFRP sheets that effectively strengthens RC beams, controls both the failure modes and the stress distribution around the beam chords and enhances the serviceability (deflection produced under working loads be sufficiently small and cracking be controlled) of pre-cracked RC beams with openings. To investigate the possible damage that was caused by the service load and to simulate the structure behavior in the site, a comprehensive experimental study was performed. Two unstrengthened control beams, four beams that were pre-cracked before the application of the AFRP sheets and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various orientations of AFRP sheets, and then the beams were tested to failure. This load was kept constant during the strengthening process. The results show that both the preexisting damage level and the FRP orientation have a significant effect on strengthening effectiveness and failure mode. All of the strengthened specimens exhibited higher capacities with capacity enhancements ranging from 21.8 to 66.4%, and the crack width reduced by 25.6-82.7% at failure load compared to the control beam. Finally, the authors present a comparison between the experimental results and the predictions using the ACI 440.2R-08 guidelines.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.1
• /
• pp.117-135
• /
• 2010

This study examined the nature and directions of dietary life education (DLE) in school education. The major interest and contexts of this study is to reveal the functions and communication ways of DLE in the children and youths' educational systems including: a. meaning of eating in human life, meaning of DLE, and meaning and responsibilities of school education, b. re-defining school DLE in terms of social changes and learners' developmental characteristics and comparing with FSE parts in the existing curricular such as the Practical Arts Education and Home Economics Education, c. what should be taught in DLE with orientation, structures, elements, educational philosophy and backgrounds, and instructional techniques of DLE, and d. effective strategic plans for DLE by suggesting the New DLE's paradigms and educational aims, programs in the curriculum, reinforcement of teacher education for the elementary school teachers and home economic educational teachers, school facilities expansions, diverse program, materials and networking development.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.130-139
• /
• 2008

The purpose of this study was to develop psychological skill training program for actor with considering the ecological validity of social, cultural environment in Korean but also examine the effect of psychological skill training through psychological counseling and field study to decrease stage-anxiety. The experimental group were 2 actors, who were selected by purposive sampling. The psychological skill training program to decrease stage-anxiety for actor was composed of five stages, 12times and categorized as orientation, breathing regulation, progressive relaxation training, group counseling, heart rate bio-feedback training, self concentration, routine training, behavior therapy & self reinforcement, image training. The effects was examined on stage performance anxiety scale, psychological counseling and observation of experts. As the result of applying the psychological skill training to decrease stage-anxiety, cognitive state anxiety, somatic state anxiety were decreased. According to the result of counseling and observation, they were changed affirmative on self confrontation, harmony and rapport between actor and object. This result demonstrated the psychological skill training & counseling to decrease stage-anxiety for actor were effective.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.5 no.1
• /
• pp.1-18
• /
• 2010

Cultural industry along with cultural content that forms the center of cultural industry is the field whose interest is continually increasing due to the increase of weight in the national economy and the strengthening of importance in future value. Cultural content, particularly, accounts for the essential position in starting a business around one-person business, which recently arouses high interest in a nation. However, it is true that the debates on the rapid growth and identity of cultural content in contrast to the reinforcement of its position, and the criticisms about the lack in development of material and cultural content in staring a business show the limitation of overall cultural content in Korea. This research examines recognition of cultural industry or cultural content through terminologies of definition as well as the relationships of configures in accordance with the outcome of cultural content. Findings demonstrate that cultural content in Korea revealed the highest cultural orientation which is the same as existing interpretations, and as comparison objects, entertainment industry in the U.S. and creative industry in the UK contained the highest part of entertainment and creativity respectively. It reflects that mythical elements of language that has been discussed from the structuralist perspectives are projected in the relevant field. In conclusion, the conceptual definition of cultural content has the structure to project advantages and disadvantages of existing culture, and this limitation needs to be overcome in securing the items and business value in starting a business.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.67-71
• /
• 2023

The purpose of this study is to investigate the effect of a community-based cognitive stimulation program on cognitive function and subjective memory in the elderly with mild cognitive impairment. This study was applied by selecting 15 users who understood the purpose of this study and agreed to participate in the shelter program for more than 3 months from April 2019 to August 2019 at the D Dementia Center in G located, Gyeonggi-do. The program consisted of a total of 36 cognitive stimulation programs 3 times a week a total of 3 months. Cognitive stimulation program stimulates cognitive function through various activities such as orientation reinforcement, cognitive training, recall, music, art, and physical play, and is used for the purpose of improving social function. It consists of folk songs, percussion instruments, national gymnastics, dance, games, and traditional games. As a result of the cognitive stimulation program, the average cognitive function increased by 2.13 points from 26.33 points before implementation to 28.46 points after implementation, and a statistically significant result was obtained (p=0.000). Subjective memory decreased by 3.53 points from the average of 7.13 points before the cognitive stimulation program was implemented to 3.60 points after the implementation, and a statistically significant result was obtained (p=0.000). It can be confirmed that this works. Dementia is leading to a cost burden, and congnitive function decreases the aqulity of life. It brings various burdens. It is necessary to study cognitive stimulation programs applied to various environments in the future.

• Composites Research
• /
• v.36 no.1
• /
• pp.1-15
• /
• 2023

Demand for energy consumption reduction is increasing according to the development expectations of future mobility. Lightweight structural materials are known as a method to reduce greenhouse gas emissions and improve energy efficiency. In particular, fiber reinforced polymer composite (FRP) is attracting attention as a material that can replace existing metal alloys due to its excellent mechanical properties and light weight. In this paper, industrial applications and research trends of carbon fiber reinforced composites (CFRP, carbon FRP) and self-reinforced composites (SRC) were reviewed based on the reinforcement, polymer matrix, and manufacturing process. In order to overcome the expensive process cost and long manufacturing time of the epoxy resin-based autoclave method, which is mainly used in the aircraft field, mass production of CFRP-applied electric vehicles has been reported using a high-pressure resin transfer molding process including fast-curing epoxy. In addition, thermoplastic resin-based CFRP and interface enhancement methods to solve the recycling issue of carbon fiber composites were reviewed in terms of materials and processes. To form a perfect matrix-reinforcement interface, which is known as the major factor inducing the excellent mechanical properties of FRP, studies on SRC impregnated with the same matrix in polymer fibers have been reported. The physical and mechanical properties of SRC based on various thermoplastic polymers were reviewed in terms of polymer orientation and composite structure. In addition, a copolymer matrix strategy for extending the processing window of highly drawn polypropylene fiber-based SRC was discussed. The application of CFRP and SRC as lightweight structural materials can provide potential options for improving the energy efficiency of future mobility.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.137-150
• /
• 2015

This study investigated the influence of Entrepreneurship, Start-up Competency on Entrepreneurial Satisfaction and the moderating effect of Flow experience. The goal of this investigation is to empirically prove that despite the benefits of educational and financial support, mentoring and consulting which selected applicants received as a part of supporting business for start-up companies provided by national and local government and public organizations, there is a gap between individual entrepreneurs' satisfaction after actual foundation of the company. For the purpose of this investigation, data was collected through a survey with 320 entrepreneurs who were beneficiaries of government's supporting business for start-up companies and have founded their companies less than 5 years ago. For entrepreneurship variables, three factors of innovativeness, proactiveness and risk-taking were reviewed, and also reviewed the three variables network capability, market orientation and marketing capacity as Start-up competency. The collected data was used to perform a multiple regression analysis, and the moderating effect of flow experience was analysed using moderated regression analysis. The result of analysis shows that innovativeness, proactiveness and risk-taking of entrepreneurship positively affected the entrepreneurial satisfaction, and network capability, market orientation and marketing capability also positively affected the entrepreneurial satisfaction. As a result of analysing the moderating effect of flow experience, it appeared that there is a positive moderating effect between entrepreneurship, start-up competency, and the entrepreneurial satisfaction. This result concludes that evaluation items of entrepreneurship and start-up competency as applicant selecting criteria in supporting business for start-up companies, are valid. It is also concluded that start-up supports such as education, funds and consulting are also important, but it is necessary to make changes such as construction of start-up ecosystem and reinforcement of networking support, so that entrepreneurs can have the flow experience themselves in the process after founding a company.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.