• 반도체디스플레이기술학회지
• /
• 제4권2호
• /
• pp.1-5
• /
• 2005

Electon spin resonance measurements have been performed on the Mg-doped wurtzite GaN thin films grown on sapphire substrates by low-pressure metal-organic chemical vapor deposition. The sample set included films as-grown with the regular Mg doped and Mg delta doped samples and the corresponding annealed ones. The resonance signal has been observed from the annealed Mg delta-doped sample with the Lande g value of 2.029. This indicates that the singlet resonance signal originates from the neutral Mg acceptor located at 0.24 eV above the valence band edge and 0.13 eV above the Fermi level because of the nuclear hyperfine spin 1=0 of Mg and the larger value than the free electron g=2.0023.

• 대한산업공학회지
• /
• 제29권3호
• /
• pp.239-246
• /
• 2003

Individual items are produced continuously from an industrial process. Each item is checked to determine whether it satisfies a lower screening limit for the quality characteristic which is the weight of an expensive ingredient. If it does, it is sold at a regular price; if it does not, it is reprocessed or sold at a reduced price. The process mean may be adjusted to a higher value in order to reduce the proportion of the nonconforming items. Using a higher process mean, however, may result in a higher production cost. In this paper, the optimal process mean and lower screening limit are determined in situations where the probability that an item functions well is given by a logistic function of the quality characteristic. Profit models are constructed which involve four price/cost components; selling prices, cost from an accepted nonconforming item, and reprocessing and inspection costs. Methods of finding the optimal process mean and lower screening limit are presented and numerical examples are given.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.167-168
• /
• 2006

A hyrdrothermal synthesis has been developd to prepare rod-like crystals of copper oxide using copper nitrate trihydrate as a function of synthesis temperature, stirring speed and solution pH value. The properties of the fabricated crystals were studied using scanning electron microscopy, X-ray diffraction and particle size analysis. The morphology of the synthesized CuO was dependent on both the pH value of the solution and the morphology of the seed materials. Synthesized particles have regular morphologies and a uniform size distribution.

• Journal of Animal Science and Technology
• /
• 제49권6호
• /
• pp.737-744
• /
• 2007

수입 옥수수들의 TME가를 구하고 진정 아미노산 이용율(TAAA) 그리고 여타 진정 영양소 이용율을 측정하기 위하여 57주령 된 Hy-Line rooster 24수를 대사 케이지에 수용하고 미국산 (USA), 아르헨티나산(ARG), 중국산(CHN), 중국산‐premium(CHNP) 등 원산지별로 5수씩 공시하였고 내인성 에너지가와 아미노산을 측정하기 위해 4수를 절식구로 두어 총 4회에 걸쳐 4주 간격을 두고 대사시험을 실시하였다. 얻어진 TME값은 In vitro 방법에 의해 측정한 MEn, ME 그리고 MEpc와의 상관계수를 구하였다. 풍건물(as fed) 기준으로 한 TME 값에 있어서 USA구가 3,745로 ARG구 3,555 그리고 CHNP구 3,517 보다 유의하게(P<0.01) 높았고 CHN구 3,671kcal/kg와는 유의한 차가 없었다. 건물(DM) 기준 TME 값은 USA구가 4,144로 CHN구 4,060와 CHNP구 4,008과는 유의한 차가 없었으나 ARG구 4,001kcal/kg 보다는 유의하게(P<0.05) 높았다. 옥수수의 phenylalanine, histidine 그리고 arginine의 TAAA는 수입 옥수수간에 유의한 차이가 있었는데 USA가 가장 높았다. 그러나 전체 아미노산의 TAAA에 있어서는 유의차가 없었으나 USA 옥수수가 89.4%로 다른 원산지 옥수수들인 ARG 89.3%, CHN 89.1%, CHNP 86.5% 보다 다소 높았다. 영양소 이용률에 있어서 NFE 이용율은 USA, ARG 그리고 CHN 옥수수가 CHNP 옥수수 보다 유의하게(P<0.05) 높았으며 조단백, 조지방, 조섬유 및 조회분의 이용율에는 시료간에 유의한 차가 없었다. TME가와 In vitro 방법에 의해 측정된 MEn가 사이의 상관계수는 0.91로 P<0.1이었으나 TME가와 ME가 그리고 TME가와 MEpc가 사이에서의 상관계수는 각각 0.90과 0.83으로 P>0.1이었다. 결론적으로 미국산 옥수수가 TME값과 아미노산 이용율이 가장 높았고 중국산 premium corn은 중국산 regular corn과 비교했을 때 유의한 차이가 없었다. In vitro 방법으로 옥수수의 TME가를 추정할 경우 MEn값 산출 공식을 이용하는 것이 적합하다고 사료된다.

• 대한수학회논문집
• /
• 제20권3호
• /
• pp.427-436
• /
• 2005

Let (R, m) be a 2-dimensional regular local ring with algebraically closed residue field R/m. Let K be the quotient field of R and v be a prime divisor of R, i.e., a valuation of K which is birationally dominating R and residually transcendental over R. Zariski showed that there are finitely many simple v-ideals $m=P_0\;{\supset}\;P_1\;{\supset}\;{\cdotS}\;{\supset}\;P_t=P$ and all the other v-ideals are uniquely factored into a product of those simple ones. It then was also shown by Lipman that the predecessor of the smallest simple v-ideal P is either simple (P is free) or the product of two simple v-ideals (P is satellite), that the sequence of v-ideals between the maximal ideal and the smallest simple v-ideal P is saturated, and that the v-value of the maximal ideal is the m-adic order of P. Let m = (x, y) and denote the v-value difference |v(x) - v(y)| by $n_v$. In this paper, if the m-adic order of P is 2, we show that $O(P_i)\;=\;1\;for\;1\;{\leq}\;i\; {\leq}\;{\lceil}\;{\frac{b+1}{2}}{\rceil}\;and\;O(P_i)\;=2\;for\;{\lceil}\;\frac{b+3}{2}\rceil\;{\leq}\;i\;\leq\;t,\;where\;b=n_v$. We also show that $n_w\;=\;n_v$ when w is the prime divisor associated to a simple v-ideal $Q\;{\supset}\;P$ of order 2 and that w(R) = v(R) as well.

• 전자공학회논문지CI
• /
• 제49권2호
• /
• pp.134-142
• /
• 2012

본 논문에서는 클라우드 컴퓨팅에 적합한 LDPC 부호 복제 기법을 제안한다. 이를 위해 먼저 파일 가용성과 스토리지 오버헤드 분석을 통해 클라우드 컴퓨팅에 적합한 블록 수와 LDPC 부호 종류를 결정한다. 그리고 LDPC 부호를 정의하는 Tanner 그래프의 무작위 생성 방법과 생성한 LDPC 부호들의 반복적인 복호화 과정을 통한 성능 비교 방법을 제시한다. 또한 실험을 통하여 클라우드 컴퓨팅에 적합한 LDPC 부호 복제 기법의 그래프 정규성과 총 간선 수에 따른 성능 변화를 분석하였다. 이를 통해 LDPC 부호의 그래프 정규성이 좌-정규와 약 좌-정규 일 때와 총 간선 수가 최소이거나 최소에 근접한 값을 가질 때 가장 성능이 좋음을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제23권3호
• /
• pp.344-351
• /
• 2015

Braking force inspection of vehicles in service is certainly one of the most important characteristics that affect vehicle safety. Up to now, in domestic country, the regular safety inspection of vehicles in service has been tested with a roller type brake test (a static braking force inspection system). But, in EU and USA etc. in recent years, it has been tested with a plate type brake test (a dynamic braking force inspection system). In this study, to compare the characteristics of above two test systems, the correlations for the results of braking force are evaluated statistically. As the results, in the case of main braking force, the range of the $R^2$ of the deviation for the left and right side is 0.5386 ~ 0.6231 in the rear axle and 0.0032 ~ 0.0052 in the front axle respectively, then the $R^2$ in the front axle is lower than that in the rear axle and the total variation is unexplained by the least-squares regression line statistically. Also, the p-value for the deviation of the left and right in the front axle is 0.4839 ~ 0.5755, then it has nonsignificant in the front axle. Therefore, the static braking force inspection system can not reflect the inertia force that there is a load transfer from the rear axle to the front axle during braking. Accordingly, it is necessary to adopt the dynamic braking force inspection system which can reflect the inertia force on the regular vehicle safety inspection in domestic country.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.202-207
• /
• 2017

This paper presents the results of an experimental study on the motions and mooring characteristics of a floating vertical axis wind turbine system. Based on a comparison of regular wave experiment results, the motions of structures with different types of mooring are almost the same. Based on the tension response results of a regular wave experiment with a catenary mooring system, the mooring lines in front of the structure have a larger tension effect than the back of the structure by the drifted offset of the structure. The dynamic response spectrum of the structure in the irregular wave experiments showed no significant differences in response to differences in the mooring system. As a result of the comparison of the tension response spectra, the mooring lines have a larger value with a drifted offset for the structure, as shown in the previous regular wave experiment. The results of the dynamic response of the structure under irregular wave and wind conditions showed that the heave motion response is influenced by the coupled effect with the mooring lines of the surge and pitch motion due to the drifted offset and steady heeling. In addition, the mooring lines in front of the structure have a very large tension force compared to the mooring lines in back of the structure as a result of the drifted offset of the structure.

• 대한수학회논문집
• /
• 제23권4호
• /
• pp.511-528
• /
• 2008

Let (R, m) be a 2-dimensional regular local ring with algebraically closed residue field R/m. Let K be the quotient field of R and $\upsilon$ be a prime divisor of R, i.e., a valuation of K which is birationally dominating R and residually transcendental over R. Zariski showed that there are finitely many simple $\upsilon$-ideals $m\;=\;P_0\;{\supset}\;P_1\;{\supset}\;{\cdots}\;{\supset}\;P_t\;=\;P$ and all the other $\upsilon$-ideals are uniquely factored into a product of those simple ones [17]. Lipman further showed that the predecessor of the smallest simple $\upsilon$-ideal P is either simple or the product of two simple $\upsilon$-ideals. The simple integrally closed ideal P is said to be free for the former and satellite for the later. In this paper we describe the sequence of simple $\upsilon$-ideals when P is satellite of order 3 in terms of the invariant $b_{\upsilon}\;=\;|\upsilon(x)\;-\;\upsilon(y)|$, where $\upsilon$ is the prime divisor associated to P and m = (x, y). Denote $b_{\upsilon}$ by b and let b = 3k + 1 for k = 0, 1, 2. Let $n_i$ be the number of nonmaximal simple $\upsilon$-ideals of order i for i = 1, 2, 3. We show that the numbers $n_{\upsilon}$ = ($n_1$, $n_2$, $n_3$) = (${\lceil}\frac{b+1}{3}{\rceil}$, 1, 1) and that the rank of P is ${\lceil}\frac{b+7}{3}{\rceil}$ = k + 3. We then describe all the $\upsilon$-ideals from m to P as products of those simple $\upsilon$-ideals. In particular, we find the conductor ideal and the $\upsilon$-predecessor of the given ideal P in cases of b = 1, 2 and for b = 3k + 1, 3k + 2, 3k for $k\;{\geq}\;1$. We also find the value semigroup $\upsilon(R)$ of a satellite simple valuation ideal P of order 3 in terms of $b_{\upsilon}$.

• 농촌지도와개발
• /
• 제15권4호
• /
• pp.659-681
• /
• 2008

The purpose of this study is to empirically analyze factors that influence farm managers' intentions to use an agricultural farm management information systems. It focused on "LFcenter System," a leading information system operated by the Rural Development Administration for farm management. Participants of this study are classified into two groups: a group of leading farm managers and a group fo regular farm managers. A total of 192 survey samples on users' intentions are collected; 85 samples from leading farm managers and 107 from regular farm managers. The theoretical background of this study is developed based on Theory of Reasoned Action(TRA), Technology Acceptance Model(TAM), Diffusion of Innovation(DOI), Social Cognitive Theory(SCT), and Theory of Planned Behavior(TPB). Partial Least Squares(PLS) method is used to test a proposed Structural Equation Model(SEM), including nine hypotheses. The differences between two groups are investigated using Smith-Satterthwait test. The findings from this study are: First of all, in terms of average comparison of most variables used in this study, a group of leading farm managers shows higher value that the other group in most cases. Second, hypothesis tests how that "subjective norms", "goal to study", "perceived usefulness", "perceived enjoyment", and "intention to use" significantly influence the intention to use an agricultural management information system in the group of leading farm managers. However, "subjective norms", "goal to study", "perceived ease of use", "perceived usefulness", "perceived enjoyment", and "intention to use" turned out to significantly influence the intention to use an agricultural management information system in the group of regular farms managers. Based on the results of Smith-Satterthwait test, compared with a group of leading farms managers, the impact of "goal to study" on "intention to use" is significantly stronger. On the other hand, in the group of leading farms managers, "perceived usefulness" and "perceived enjoyment" turned out to be main drivers of "intention to use."