• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.987-988
• /
• 2009

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2732-2734
• /
• 2005

In present, most of metallic structures(gas pipeline, oil pipeline, water pipeline, etc) are running parallel with subway and power line in seoul. Moreover subway system and power line make a stray current due to electrical corrosion on metallic structures. The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or soil pollution and so on. So, they have to measure and analyze the data about P/S(Pipe to Soil) potential due to stray current of subway system. So, we have developed the Real-time Wireless Remote Monitoring System for Stray Current of Subway System. In this system, the permanent buried type reference electrode is necessary. In this paper, results of development about the permanent buried type reference electrode($Cu/CuSO_4$) are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.125.4-125
• /
• 2001

The problem of recongurable ight control is investigated, focusing on model reference adaptive control(MRAC) through imprecise fault diagnosis. The method integrates the fault detection and isolation(FDI) scheme with the model reference adaptive control, and can be implemented on-line and in real-time. The algorithm can cope with the fast varying parameters. The Simulation results demonstrate the ability of reconguration to maintain the stability and acceptable performance after a failure.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.416-421
• /
• 2004

Off-line feedrate scheduling is presented as the advanced technology to regulate cutting forces at the desired level through change of feedrates. In rough cutting, the feedrate scheduling aims at reducing the machining time, which is the most important factor for better productivity. Thus, the largest force which can avoid breakage of tool shank and tooth is a reference force for feedrate scheduling in rough cutting. In this paper, a calculation method of the reference cutting force for feedrate scheduling is developed. This model calculates rupture plane of tooth using the FEM analysis of a tool and computes the reference force using the transverse rupture strength of a tool. Experiments validate that the presented feedrate scheduling model reduced machining time drastically and regulate cutting forces at the reference cutting force.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.1
• /
• pp.32-42
• /
• 2001

In this paper, a parameter estimator is developed for the plant model whose structure is represented by the Takagi-Sugeno model. The essential idea behind the on-line estimation is the comparison of the measured stated with the state of an estimation model whose structure is the same as that of the parameterized model. Based on the parameter estimation scheme, and indirect Model Reference Adaptive Fuzzy control(MRAFC) scheme is proposed to provide asymptotic tracking of a reference signal for the systems with uncertain for slowly time-varying parameters. The developed control law and adaptive law guarantee the boundedness of all signals in the closed-loop systems. In addition, the plant state tracks the state of the reference model asymptotically with time for any bounded reference input signal.

• Journal of Information Technology Services
• /
• v.4 no.2
• /
• pp.47-59
• /
• 2005

S/W product line is a S/W product or a set of S/W system, which has common functions. We can develop a specific S/W product, which satisfiesrequirements of a particular market segment and a mission in a specific domain by reusing the core asset such as the developed S/W architecture through the S/W product line. S/W development methodology based on the S/W product line can develop a S/W more easily and fast by reusing the developed S/W core asset. An advanced country of S/W technology selects S/W product line as a core field of S/W production technology, and support technology development. In case of USA, CMU/SEI (Carnegie Mellon University / Software Engineering Institute) developed product-line framework 4.0 together with the industry and the Ministry of National Defense. Europe is supporting the development of product line technology through ITEA(IT for European Advancement) program. In this paper, we aim to construct reference architecture of S/W product line for production of the S/W product line.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1171-1174
• /
• 2004

Leakage current of the polymer arrester(42kV, 10kA, Class3) for railroad line applied actually field was observed and electrical characteristics of arrester before and after applied actually field were investigated. During applied actually field, leakage current of arresters were $610{\sim}647{\mu}A$ in AN SAN line and $500{\mu}A$ in YUNG DONG line. After applied actually field, electrical characteristics of arrester, such as insulation test, reference voltage test, leakage current test and partial discharge current test, wasn't variation as before applied actually field.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.83-87
• /
• 2015

This paper presents a simple notch filter, which is so suitable for three-phase unbalanced and distorted power line. In the d-q synchronous transformation, three-phase unbalanced and distorted voltages generate lots of ripple voltages on d-q axes. The ripples make disturbances on controllers such as PLL of phase tracking. Unbalanced state makes ripple of double the frequency of power line. Odd harmonics 5th and 7th on the line make even 4th and 6th ripples on d-q axes due to the rotating reference frame, respectively. Cascaded two comb filters, delay lines 1/4T and 1/8T, are adopted for the ripple rejection. The filter rejects harmonics 2nd, 4th, 6th, 10th and so on. They are very effective to remove the ripples of both unbalance and distortion. The filter, implemented by two FIFOs on an experimental system, is adopted on a PLL controller of power line phase tracking. Through the simulation and experimental results, performance of the proposed comb filter has been validated.

• Journal of Power Electronics
• /
• v.7 no.2
• /
• pp.159-173
• /
• 2007

In this paper, an intelligent sliding-mode position controller (ISMC) for achieving favorable decoupling control and high precision position tracking performance of permanent-magnet synchronous motor (PMSM) servo drives is proposed. The intelligent position controller consists of a sliding-mode position controller (SMC) in the position feed-back loop in addition to an on-line trained fuzzy-neural-network model-following controller (FNNMFC) in the feedforward loop. The intelligent position controller combines the merits of the SMC with robust characteristics and the FNNMFC with on-line learning ability for periodic command tracking of a PMSM servo drive. The theoretical analyses of the sliding-mode position controller are described with a second order switching surface (PID) which is insensitive to parameter uncertainties and external load disturbances. To realize high dynamic performance in disturbance rejection and tracking characteristics, an on-line trained FNNMFC is proposed. The connective weights and membership functions of the FNNMFC are trained on-line according to the model-following error between the outputs of the reference model and the PMSM servo drive system. The FNNMFC generates an adaptive control signal which is added to the SMC output to attain robust model-following characteristics under different operating conditions regardless of parameter uncertainties and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed intelligent sliding mode position controller. The results confirm that the proposed ISMC grants robust performance and precise response to the reference model regardless of load disturbances and PMSM parameter uncertainties.

• Journal of Korean Library and Information Science Society
• /
• v.23
• /
• pp.253-284
• /
• 1995

The purpose of this paper is to analyse the current status of reference education and to suggest directions for reference education in America and in Korea. For this purpose, the historical developments of reference services, and the names, problems and changes of reference courses are studied. The findings of the study can be summarized as follows; 1. The names of reference courses are various. In America, On-Line Services or Information Services are used in general, but in Korea, Reference Services are widely used. 2. In America, some library schools have only subject literature courses including business, law, music, etc. instead of basic reference courses. 3. Only one reference course is given by most schools in America and in Korea. However, a few schools which have no graduate courses provide two reference courses in Korea. 4. Analysis of textbooks used in reference courses shows that Reference Research by Joon-Shik Park, Reference Services and Reference Sources by Ock-Soon Noh are used in general. In addition, Introduction to Reference Work by Katz is used. 5. Lecture methods are generally used in teaching reference courses, but reviews of reference materials in library, class presentation, and case study method are also used. It is desirable that role playing and pathfinders' used in U.S. are introduced to our schools. 6. Analysis of library user instruction courses in Korea shows that 7 of 11 universities have the courses,, only one university teaches library user instruction as a part of reference courses, 3 universities don't. 7. Analysis of opinions about the directions for reference education shows that changes of reference courses names, expansion of courses contents, emphasis on communication technique, changes of teaching methods, proper combination of theory vs. practice, an increase in electronic reference education and training of subject specialist are needed.