• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.719-726
• /
• 2020

능동형 유기 발광 다이오드의 픽셀 노화를 보상하기 위한 문턱 전압 감지 회로가 제안된다. 제안된 문턱 전압 감지 회로는 샘플-홀드 회로와 10비트의 해상도를 가지는 단일 입력 축차 근사형 아날로그-디지털 변환기로 구성된다. 각 샘플-홀드 회로의 스케일 다운 변환기와 단일-차동 변환기를 가지는 가변 이득 증폭기를 제거하기 위해 단일 입력 축차 근사형 아날로그-디지털 변환기를 위한 중간 기준 전압 보정과 입력 범위 보정이 수행된다. 제안된 문턱 전압 감지 회로는 1.8V 공급 전압의 180nm CMOS 공정을 사용하여 설계된다. 단일 입력 축차 근사형 아날로그-디지털 변환기로의 유효 비트와 전력 소모는 각각 9.425비트와 2.83mW이다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.161-166
• /
• 2008

The major purpose of this paper is to develop an uncertainty estimate for the calibration of thermopile instruments used to measure solar radiation parameters. We briefly describe the solar radiation parameters most often measured, instrumentation, reference standards, and calibration techniques. The bulk of the paper describes elemental sources of error and their magnitude. We then apply a standard error analysis methodology to combine these elemental error estimates into a statement of total uncertainty for the instrument calibration factor. Our results allow one to evaluate the accuracy of a radiometric measurement using thermopile instrumentation in the light of the application, such as engineering test evaluation or for validation of theoretical models.

• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.230-236
• /
• 2012

본 연구의 목적은 풍동 시험부의 속도산출에 필요한 속도측정시스템용 교정계수를 실험적으로 결정하는데 있었다. 교정실험은 국방과학연구소 저속풍동에서 표준 피토관을 이용하여 수행되었으며 이때의 교정속도 영역은 약 10~100 m/s이었다. 풍동교정실험결과의 유효성 평가를 위해 기존의 교정계수 측정결과와의 비교검토를 수행하였으며, 기존 교정 결과들과 잘 부합됨을 확인하였다.

• 한국작물학회지
• /
• 제51권spc1호
• /
• pp.304-309
• /
• 2006

Near infrared reflectance spectroscopy (NIRS) was used to develop a rapid and nondestructive method for the determination of fatty acid composition in sesame (Sesamum indicum L.) seed oil. A total of ninety-three samples of intact seeds were scanned in the reflectance mode of a scanning monochromator, and reference values for fatty acid composition were measured by gas-liquid chromatography. Calibration equations were developed using modified partial least square regression with internal cross validation (n=63). The equations obtained had low standard errors of cross-validation and moderate $R^2$ (coefficient of determination in calibration). Prediction of an external validation set (n=30) showed significant correlation between reference values and NIRS estimated values based on the SEP (standard error of prediction), $r^2$ (coefficient of determination in prediction) and the ratio of standard deviation (SD) of reference data to SEP. The models developed in this study had relatively higher values (more than 2.0) of SD/SEP(C) for oleic and linoleic acid, having good correlation between reference and NIRS estimate. The results indicated that NIRS, a nondestructive screening method could be used to rapidly determine fatty acid composition in sesame seeds in the breeding programs for high quality sesame oil.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.42-47
• /
• 2011

Measurement uncertainty analysis of fuel flow using turbine flowmeter was performed for the case of altitude engine test. SAE ARP4990 was used as the fuel flow calculation procedure, as well as the mathematical model for the measurement uncertainty assessment. The assessment was performed using Sensitivity Coefficient Method. 11 parameters involved in the calculation of the flow rate were considered. For the given equipment setup, the measurement uncertainty of fuel flow was assessed in the range of 1.19~1.86 % for high flow rate case, and 1.47~3.31 % for low flow rate case. Fluctuation in frequency signal from the flowmeter had the largest influence on the fuel flow measurement uncertainty for most cases. Fuel temperature measurement had the largest for the case of low temperature and low flow rate. Calibration of K-factor and the interpolation of the calibration data also had large influence, especially for the case of very low temperature. Reference temperature, at which the reference viscosity of the sample fuel was measured, had relatively small contribution, but it became larger when the operating fuel temperature was far from reference temperature. Measurement of reference density had small contribution on the flow rate uncertainty. Fuel pressure and atmospheric pressure measurement had virtually no contribution on the flow rate uncertainty.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• 전자공학회논문지SC
• /
• 제40권3호
• /
• pp.135-144
• /
• 2003

본 논문에서는 고속 혼성모드 집적회로를 위한 온-칩(on-chip) CMOS 전류 및 전압 레퍼런스 회로를 제안한다. 제안하는 전류 레퍼런스 회로는 기존의 전류 레퍼런스 회로에서 부정확한 전류 값을 조정하기 위해 주로 사용되는 아날로그 보정 기법과는 달리 디지털 영역에서의 보정 기법을 사용한다. 또한, 제안하는 전압 레퍼런스 회로는 고속으로 동작하는 혼성모드 집적회로의 출력단에서 발생할 수 있는 고주파수의 잡음 성분을 최소한으로 줄이기 위해 고주파 신호 성분에 대해 작은 출력 저항을 볼 수 있는 구조의 레퍼런스 전압 구동회로를 사용한다. 이 레퍼런스 전압 구동회로는 전력 소모 및 칩 면적을 최소화하기 위해서 저 전력의 증폭기와 크기가 작은 온-칩 캐패시터를 사용하여 구현하였다. 제안하는 레퍼런스 회로는 0.18 um n-well CMOS 공정으로 설계 및 제작되었으며, 250 um x 200 um의 면적을 차지한다. 칩 제작 및 측정결과, 제안하는 전류 및 전압 레퍼런스 회로는 공급 전압 및 온도의 변화에 대해서 각각 2.59 %/V와 48 ppm/℃의 변화율을 보인다.

• 센서학회지
• /
• 제22권6호
• /
• pp.404-409
• /
• 2013

We devised calibration procedure for industrial thermometers by a comparison method at the boiling point of nitrogen (${\sim}-196^{\circ}C$). The uncertainty of the calibration was 4 mK (k = 2). As experimentally demonstrated in this work, the effect of the atmospheric pressure on the boiling point of nitrogen can be easily detected by the thermometer. Therefore, when the boiling point of nitrogen is used for calibration of thermometer by comparison, either a reference thermometer must be used to provide the reference temperature or the effect of atmospheric pressure should be carefully considered. The use of a copper block with a large thermal mass soaked into the liquid nitrogen was proven to be more reliable, and the stability of the temperature immersed into the copper block was 1.4 mK. The temperatures at the thermometer wells, evaluated by the crossed-measurement method to compensate for the inaccuracy of the thermometers and the linear drift of the temperature of the copper block, were equivalent within 0.23 mK of standard uncertainty.

• 비파괴검사학회지
• /
• 제26권4호
• /
• pp.246-254
• /
• 2006

방사선 측정분야에서 사용되는 감마 서베이미터의 교정데이터 자동처리를 위한 전산 프로그램을 개발하였다. 전산 프로그램은 Visual Basic을 기반으로 개발되었으며, 교정과정에 따라 단계별로 윈도우를 제작하고 코드화하였다. 교정 데이터의 자동처리를 위해 Microsoft Excel 프로그램을 제어하여 미리 자동 연산된 엑셀 셀 내에 데이터가 입력되도록 하였다. 개발프로그램 성능평가의 일환으로 검증된 데이터와 프로그램에서 출력된 데이터를 비교한 결과, 교정인자 산출 및 불확도 평가에서 동일한 결과가 나왔다. 또한, 개발프로그램을 교정업무에 적용시킨 결과, 업무의 효율성 및 정확성은 증가하였다.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.169-176
• /
• 2021

The Global Space-based Inter-Calibration System (GSICS) is an international partnership sponsored by World Meteorological Organization (WMO) to continue and improve climate monitoring and to ensure consistent accuracy between observation data from meteorological satellites operating around the world. The objective for GSICS is to inter-calibration from pairs of satellites observations, which includes direct comparison of collocated Geostationary Earth Orbit (GEO)-Low Earth Orbit (LEO) observations. One of the GSICS inter-calibration methods, the Ray-matching technique, is a surrogate approach that uses matched, co-angled and co-located pixels to transfer the calibration from a well calibrated satellite sensor to another sensor. In Korea, the first GEO satellite, Communication Ocean and Meteorological Satellite (COMS), is used to participate in the GSICS program. The National Meteorological Satellite Center (NMSC), which operated COMS/MI, calculated the Radiative Transfer Model (RTM)-based GSICS coefficient coefficients. The L1P reproduced through GSICS correction coefficient showed lower RMSE and Bias than L1B without GSICS correction coefficient applied. The calculation cycles of the GSICS correction coefficients for COMS/MI visible channel are provided annual and diurnal (2, 5, 10, 14-day), but long-term evaluation according to these cycles was not performed. The purpose of this paper is to perform evaluation depending on the annual/diurnal cycles of COMS/MI GSICS correction coefficients based on the ray-matching technique using Suomi-NPP/Visible Infrared Imaging Radiometer Suite (VIIRS) data as reference data. As a result of evaluation, the diurnal cycle had a higher coincidence rate with the reference data than the annual cycle, and the 14-day diurnal cycle was the most suitable for use as the GSICS correction coefficient.