• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.28-35
• /
• 2010

The variable block size motion estimation (ME) and compensation (MC) using multiple reference frames is adopted in H.264/AVC to improve coding efficiency. However, the computational complexity for ME/MC increases proportional to the number of reference frames and variable blocks. In this paper, we propose a new efficient reference frame selection algorithm to reduce the complexity while keeping the visual quality. First, a motion vector reference map is constructed by SAD of $4{\times}4$ block unit for multi reference frames. Next, the variable block size motion estimation and motion compensation is performed according to the motion vector reference map. The computer simulation results show that the average loss of BDPSNR is -0.01dB, the increment of BDBR is 0.27%, and the encoding time is reduced by 38% compared with the original method for H.264/AVC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.81-89
• /
• 2009

We propose a D-ATR UWB (Differential-Average Transmitted Reference Ultra Wide Band) system based on impulse radio. The TR-UWB systems including traditional TR (Transmitted Reference) and ATR (Average TR), exhibit a problem of reduced data rate, since reference signals are additionally transmitted. To tackle this issue, the transmitter of the proposed D-ATR system employs a differential coding like the conventional D-TR system. In addition, the receiver of the proposed system has the structure that can improve signal-to-noise ratio of the reference template used in the correlation process, by recursively averaging the received reference signals like the conventional ATR system. The simulation results in the IEEE 802.15.4a UWB multipath channel models reveal that the proposed D-ATR system achieves much better bit error rate performance as compared to the conventional D- TR system.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1027-1036
• /
• 2018

In this paper a new generalized space vector pulse width modulation scheme is proposed based on the principle of reverse mapping to drive the switches of multilevel inverters. This projected scheme is developed based on the middle vector of the subhexagon which holds the tip of the reference vector, which plays a major role in mapping the reference vector. A new approach is offered to produce middle vector of the subhexagon which holds tip of the reference vector in the multilevel space vector plane. By using middle vector of the subhexagon, reference vector is linked towards the inner two level sub-hexagon. Then switching vectors, switching sequence and dwell times corresponding to a particular sector of a two-level inverter are determined. After that, by using the two level stage findings, the switching vectors related to exact position of the reference vector are directly generated based on principle of the reverse mapping approach and do not need to be found at n level stage. In the reverse mapping principle, the middle vector of subhexagon is added to the formerly found two level switching vectors. The proposed generalized algorithm is efficient and it can be applied to an inverter of any level. In this paper, the proposed scheme is explained for a five-level inverter and the performance is analyzed for five level and three level inverters through MATLAB. The simulation results are validated by implementing the propose scheme on a V/f controlled three-level inverter fed induction motor using dSPACE control desk.

• Journal of Korean Library and Information Science Society
• /
• v.39 no.2
• /
• pp.187-212
• /
• 2008

Many libraries and information centers offer various resources on their web sites and web reference is one of them. However, it can be quite burdensome for individual libraries to build a reliable database while sorting through countless web data. The attempts to build a collaborative database have been also unsuccessful due to heavy workload of librarians and financing problems. This study seeks to propose a UCC(User Created Contents)-based web reference database created by general users including librarians. It is an open reference database where everyone can contribute regardless of their affiliation and library types (for librarians), Also, it requires metadata scheme to standardize web-based references. By setting the initial metadata, it can present a basic guideline for users to post web references.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.21 no.2
• /
• pp.81-96
• /
• 2010

This study aimed to suggest metadata elements for online reference resource systems based on users' perceptions. We surveyed librarians in four types of libraries, asking them indicate the need for each of 17 metadata elements. The survey results were compared to the current data input rates of the system, which has been operating for the past two years. Based on both the respondent data and current data input rates, we suggested that title, description, subject, creator, type, identifier, language, coverage, location, and tag elements must be included in the system as the metadata elements for online reference resources. n addition, the input rates of creator and copyright were 20.20% and 18.30%, respectively, but the respondents answered that these items were needed 82.15% and 82.77%, respectively. Therefore, these two items are necessary as metadata elements. On the other hand, the data input rates of type, source, date, relation, and contribution were less than 3%, but almost 70% of respondents answered that all these items were needed. So further research should be performed to determine whether or not these items are needed for online reference resource systems.

• Journal of Ginseng Research
• /
• v.35 no.4
• /
• pp.487-496
• /
• 2011

Good manufacturing practice (GMP)-based quality control is an integral component of the common technical document, a formal documentation process for applying a marketing authorization holder to those countries where ginseng is classified as a medicine. In addition, authentication of the physico-chemical properties of ginsenoside reference materials, and qualitative and quantitative batch analytical data based on validated analytical procedures are prerequisites for certifying GMP. Therefore, the aim of this study was to propose an authentication process for isolated ginsenosides $Rb_1$ and $Rg_1$ as reference materials (RM) and for these compounds to be designated as RMs for ginseng preparations throughout the world. Ginsenoside $Rb_1$ and $Rg_1$ were isolated by Diaion HP-20 adsorption chromatography, silica gel flash chromatography, recrystallization, and preparative HPLC. HPLC fractions corresponding to those two ginsenosides were recrystallized in appropriate solvents for the analysis of physico-chemical properties. Documentation of the isolated ginsenosides was made according to the method proposed by Gaedcke and Steinhoff. The ginsenosides were subjected to analyses of their general characteristics, identification, purity, content quantitation, and mass balance tests. The isolated ginsenosides were proven to be a single compound when analyzed by three different HPLC systems. Also, the water content was found to be 0.940% for $Rb_1$ and 0.485% for $Rg_1$, meaning that the net mass balance for ginsenoside $Rb_1$ and $Rg_1$ were 99.060% and 99.515%, respectively. From these results, we could assess and propose a full spectrum of physicochemical properties for the ginsenosides $Rb_1$ and $Rg_1$ as standard reference materials for GMP-based quality control.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.359-367
• /
• 2023

In order to ensure the high-integrity of reference stations of satellite navigation system, cycle slip should be precisely monitored and compensated. In this paper, we proposed a cycle slip algorithm for the integrity monitoring of the reference stations. Unlike the legacy method using the Melbourne-Wübbena (MW) combination and ionosphere combination, the proposed algorithm is based on ionosphere combination only, which uses high precision carrier phase observations without pseudorange observations. Two independent and complementary ionosphere combinations, Ionospheric Negative (IN) and Ionospheric Positive (IP), were adopted to avoid insensitive cycle slip pairs. In addition, a second-order time difference was applied to the IN and IP combinations to minimize the influence of ionospheric and tropospheric delay even under severe atmosphere conditions. Then, the cycle slip was detected by the thresholds determined based on error propagation rules, and the cycle slip was identified through weighted least square method. The performance of the proposed cycle slip algorithm was validated with the 1 Hz dual-frequency carrier phase data collected under the difference levels of ionospheric activities. For this experiment, 15 insensitive cycle slip pairs were intentionally inserted into the raw carrier phase observations, which is difficult to be detected with the traditional cycle slip approach. The results indicate that the proposed approach can successfully detect and compensate all of the inserted cycle slip pairs regardless of ionospheric activity. As a consequence, the proposed cycle slip algorithm is confirmed to be suitable for the reference station where real time high-integrity monitoring is crucial.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2011

Purpose: This study aims to investigate how gender-based differences are actually reflected on drug approval. Methods: Data on gender-based differences of drugs were analyzed by searching PDR (Physician's Desk Reference) with the keyword, "GENDER". Results: There were descriptions related to gender in product directions of 361 drugs in 2009 PDR, out of which 63 items actually showed gender-related differences. Drug categories showing comparatively high gender-based differences were nervous system, cardiovascular system, and alimentary tract and metabolism. Pharmacokinetic differences between genders were observed most frequently; compared to men, 32 drugs showed higher absorption while 18 drugs revealed lower clearance in women. There were 2 drugs which gender should be considered before prescribing, and 5 drugs which showed different severity of adverse effects according to gender. Conclusions: It is necessary to establish domestic policies for drug approval and use which reflects gender-based differences through sufficient researches.

• Nutrition Research and Practice
• /
• v.12 no.6
• /
• pp.459-468
• /
• 2018

BACKGROUND/OBJECTIVES: The Dietary Reference Intakes for Koreans (KDRIs), a set of reference intake values, have served as a basis for guiding a balanced diet that promotes health and prevents disease in the general Korean population. In the process of developing DRIs, a systematic review has played an important role in helping the DRI committees make evidence-based and transparent decisions for updating the next DRIs. Thus, the 2015 KDRI steering committee applied the systematic review framework to the revision process of the KDRIs. The purpose of this article is to summarize the revision process for the 2015 KDRIs by focusing on the systematic review framework. MATERIALS/METHODS: The methods used to develop the systematic review framework for 2015 KDRIs followed the Agency for Healthcare Research and Quality and the Tufts Evidence-based Practice Center. The framework for systematic review of the 2015 KDRIs comprised of the 3 following steps: (1) development of an analytic framework and refinement of key questions and search terms; (2) literature search and data extraction; and, (3) appraisal of the literature and summarizing the results. RESULTS: A total of 203,237 studies were retrieved through the above procedure, with 2,324 of these studies included in the analysis. General information, main results, comments of reviewers, and results of quality assessment were extracted and organized by study design. The average points of quality appraisals were 3.0 (range, 0-5) points for intervention, 6.1 (0-9) points for cohort, 6.0 (3-9) points for nested case-control, 5.4 (1-8) points for case-control, 14.6 (0-22) points for cross-sectional studies, and 7.0 (0-11) points for reviews. CONCLUSIONS: Systematic review helped to establish the 2015 KDRIs as a useful tool for evidence-based approach. Collaborative efforts to improve the framework for systematic review should be continued for future KDRIs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.1
• /
• pp.29-35
• /
• 2003

In order to find the feasibility of feeding raw or processed cotton (Gossypium) seed meal (CSM), 30 male crossbred lambs were randomly assigned to 5 dietary treatments with 6 animals each. Lambs were fed each of the isonitrogenous and isocaloric concentrate mixtures containing 30% deoiled groundnut cake (DGNC) (reference diet), 40% raw, 45 minute cooked, 1% $Ca(OH)_2$ or iron (1 part free gossypol:0.3 parts iron) treated CSM (replacing about 50% nitrogen moiety of reference concentrate mixture). The concentrate mixture was fed to meet 80% of CP requirements (NRC, 1985) along with ad libitum maize (Zea mays) hay for 180 days. Incorporation of raw or processed CSM did not affect the palatability of diets as evidenced by higher (p<0.01) or comparable overall daily intakes of DM and protein (CP and Digestible CP) per kg $W^{0.75}$ by lambs in comparison to reference group. Intakes of DE and ME increased (p<0.01) due to inclusion $Ca(OH)_2$ treated CSM in diets, while the intakes were lower (p<0.01) on iron treated CSM based diet when compared with reference diet. The intakes of DM, CP, TDN, DE and ME by reference and experimental lambs were higher than the requirements stipulated by NRC (1985). The growth rate was highest (p<0.01) in lambs fed on diets with cooked CSM followed by those fed raw or $Ca(OH)_2$ treated CSM based diets. The growth of lambs fed on iron treated CSM diets was depressed (p<0.01) in comparison to that of other experimental lambs probably due to increased iron intake (889 mg/kg DM of diet) which was much higher than the toxic levels of 500 ppm (NRC, 1980). The lambs on various diets utilized DM with similar efficiency while the utilization of energy (TDN, DE and ME) was more efficient (p<0.01) when the diets contained raw or cooked CSM in comparison to that of reference diet. The lambs fed raw and $Ca(OH)_2$ treated CSM incorporated diets utilized DCP with higher (p<0.01) efficiency than the lambs fed reference diet. The feed cost per kg weight gain was lower (p<0.01) on raw, cooked and $Ca(OH)_2$ treated CSM based diets in comparison to reference diet. Cooking of CSM for 45 minutes further reduced the feed cost of weight gain.