• Korean Journal of Community Nutrition
• /
• v.1 no.3
• /
• pp.376-394
• /
• 1996

This study evaluated the reproducibility and validity of the self-administered semiquantitative food frequency questionnaire used in a large prospective cohort study(Korean Cancer Research Survey) in middle-aged men. The questionnaire was administered twice at an interval of approximately two years(December, 1992-January, 1995), and four or five 24-hour recalls for each subject were collected at intervals of approximately three months. The results were as follows; 1) Although the distributions of the data estimated by the questionnaire were somewhat wider, the mean nutrient intakes of group estimated by our questionnaires and the multiple 24-hour recalls were roughly comparable. 2) The reproducibility determined by correlation of absolute(unadjusted nutrient intake) and calorie adjusted nutrient intakes from two semiquantitative food frequency questionnaires were more than 0.5, and the weighted kappa values were more than 0.4. 3) The Pearson correlation coefficients between unadjusted nutrient intakes values were average 0.40 on the average(Ca, 0.13-Carbohydrate, 0.58) at the first questionnaire vs. 24-hour recalls, and 0.28 at the second questionnaire vs. 24-hour recalls. The spearman rank order correlation coefficients were similar. When energy intake was adjusted, there was a slight reduction : 0.28 at the second questionnaire, 0.25 average on the second. In order to correct the measurement error of 24-hour recall data, the deattenuated correlation coefficient was calculated. It averaged 0.53 on the first questionnaire, 0.37 on the second questionnaire for unadjusted nutrient intake. for calorie-adjusted nutrient intake, it averaged 0.44 on the first questionnaire, 0.37 on the second questionnarie. 4) There was lower agreement(k<0.4) between the questionnaries and the 24-hour recalls. And the subjects classified in the same quartile by 24-hour recalls and first questionnaire were average 37$\%$(energy-adjusted values) and 40$\%$(unadjusted values) on the average. More than k10$\%$(average) of subjects were in the extreme quartile of the questionnarie and 24-hour recall method. But 8.2$\%$(average) of subjects classified in the lowest quartile of unadjusted nutrient intake level by the 24-hour recalls were in the highest quartile by the first questionnaire. These data indicate that our self-administered semiquantitative food frequency questionnarie is reproducible. Correlation coefficients comparing nutrient intakes measured by two different dietary assessment methods were less than 0.5. The validity of our questionnarie is not high enough.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.130-137
• /
• 2008

$La_{0.7}Sr_{0.3}MnO_3$ films were deposited on $SiO_2$/Si and Si substrates annealed at $350^{\circ}C$ by rf magnetron sputtering. The oxygen gas flow rates were varied as 0, 40, and 80 sccm. Without post annealing process, $La_{0.7}Sr_{0.3}MnO_3$ thin films on $SiO_2$/Si and Si substrates were polycrystalline with (100), (110), and (200) growth planes. The grain size of $La_{0.7}Sr_{0.3}MnO_3$ thin films was increased with increasing oxygen gas flow rate. The sheet resistance of $La_{0.7}Sr_{0.3}MnO_3$ thin films was decreased with oxygen flow rate due to the increased grain size which induced a reduction of grain boundary. TCR (temperature coefficient of resistance) values of $La_{0.7}Sr_{0.3}MnO_3$ thin films were obtained from -2.0% to -2.2%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.780-785
• /
• 2006

The composition analysis of various radish (Rapharnus sativus L.) leaves and the effects of drying condition on the quality characteristics of hot-air dried radish leaves were carried out by a response surface methodology. Independent variables put in drying temperature $(X_1)$ and drying time $(X_2)$, dependent variables put in color, calcium, iron, vitamin, etc. In the proximate composition of radish leaves by varieties, there were no significant differences in the ash, protein, lipid, calcium and iron content of samples, but there were significant differences in the vitamins, chlorophyll and color value of samples. The quality characteristics on dried radish leaves by central composite design, it was significant value on the moisture content, chlorophyll and color value according to drying temperature and drying times. But there were no significant differences in the contents of calcium $(31.41{\sim}35.80\;mg/g,\;dry\;base)$ and iron $(0.21{\sim}0.29\;mg/g\;dry\;base)$. The multiplex regression coefficients analysis were calculated with independent variables $(X_1,\;X_2)$ and dependent variables (moisture, chlorophyll, color value). The calculated coefficient correlations for the each samples were $R^2>0.97$. The effects of drying temperature were greater than drying time in the total chlorophyll content changes of radish leaves. Based on the present study, the optimum drying condition for the lowest color changes and effective reduction of moisture of radish leaves were expected to be $5{\sim}6$ hours at $70^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.167-173
• /
• 2009

It is important to study on the traffic accident severity reduction because traffic accident is an issue that is directly related to human life. Therefore, this research developed countermeasure to reduce traffic accident severity considering various factors that affect the accident severity. This research developed the Accident Severity Prediction Model using the collected accident data from Seohaean Expressway in 2004~2006. Through this model, we can find the influence factors and methodology to reduce accident severity. The results show that speed limit violation, vehicle defects, vehicle to vehicle accident, vehicle to person accident, traffic volume, curve radius CV(Coefficient of variation) and vertical slope CV were selected to compose the accident severity model. These are certain causes of the severe accident. The accidents by these certain causes present specific sections of Seohaean Expressway. The results indicate that we can prevent severe accidents by providing selected traffic information and facilities to drivers at specific sections of the Expressway.

• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.306-312
• /
• 1986

Color changes of a mixture of 0.8 M glucose, fructose or sucrose and 0.8 M glycine were evaluated by Hunter 'L', 'a', 'b' values during Maillard reaction at the temperature range of $70^{\circ}-100^{\circ}C$. The results suggested the reaction to be devided into three stages. In initial reaction the 'L' and 'a' values decreased slowely, and 'b' rapidly increased to maximum, which were followed by a rapid decrease in 'L' and 'b' and rapid increase in 'a' values at intermediate stage. At final reaction period the both 'L' and 'b' were slowed down in their reduction rate while 'a' decreased rapidly from its maximum point. All of the Hunter values were reached to nea. zero. Linear equations, which can be used for prediction of cole. change in Maillared reaction, of $1/\sqrt{(L_t-L_{\circ})^2\;+\;(a_t-a_{\circ})^2\;+\;(b_t-b_{\circ})^2}\;=\;a(1/t)\;+\;b$ for Hunter values and $1/\sqrt{X\;+\;Y\;+Z}\;=\;a(1/t)\;+\;b$ for CIE tristimulus values were found to have a very high correlation coefficient. Relationships between 'L' and 'a', 'L' and 'b' and 'a' and 'b' were also graphcally compared.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.91-100
• /
• 2007

This study suggests direct connection service which has advantage of high-speed operation of KTX and access convenience of general train, and Pre-feasibility studies on the direct connection service. And analyze transportation demand change by the method as follows; It is to analyze the demand change of before and after KTX operation by previous transport data of Gyeongbu line, and calculate the coefficient of utilization using triggering demand by opening the 2nd phase of Gyeongbu line (Dongdaegu${\sim}$Busan). Through Pre-feasibility analysis, reduction $70{\sim}100$ minutes of train travel time and total revenue will increase about $100 thousand per day. Also, there will be environment-friendly effects of decreasing $CO_2$ emissions. But, Direct connection service need to highly cost ; Buying and Operation cost of KTX train. Therefore, we will be get more correct result of Pre-feasibility study on direct connection service, if there are concrete on buying the KTX action plans.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1819-1823
• /
• 2007

유역에서 상류 유역 또는 수변을 따라 자연 자원을 이용하여 조성되어야 할 완충지대는 비점오염의 영향을 줄이기 위한 중요한 최적 관리공법이다. 교란된 토지 피복과 수변 완충지대를 관리 및 복원할 때 같은 지형조건이라도 식생 종류, 발달정도, 토양조건에 따라 오염물 제거효과가 다를 수 있으며, 최소 완충지대 길이도 제거 오염물질 대상별로 적합하게 설계되고 해석되어야 한다. 본 연구의 목적은 용담댐 유역에서 SWAT 모델을 이용하여 식생 완충지대의 비점오염원 저감 모의 재현성을 평가하는 것이였다. 소유역의 관측값과 모델 예측값에 대한 모델의 검 보정이 선행되었으며 그 중에서 가장 높은 모델 효율을 가지는 소유역에서 three zone concept의 90m 수변완충지대를 지방하천을 경계로 하여 토지 피복도를 변화시켜 SWAT 모델에 적용하였다. 이 때 교목으로는 포플러 (Populus, 30m)을 적용하였고, 포플러의 높이 및 Leaf area index를 조정하여 관목 지대(30m)에 입력하였다. 잔디 지대(30m)는 자연초지를 선택하였다. 또한 지형변수(average slope)와 Manning's coefficient을 수변완충지대의 조건에 고려하여 변화를 주었고 이에 따른 유출량 및 유사량, T-N, T-P의 변화율을 조사하였다. 또한 5, 10, 30m의 식생 여과대를 밭 지역에만 적용하여 오염물의 저감 효율을 평가하였다. SWAT 모델은 각 소유역에서 발생된 전반적인 유출량과 수질변수의 추세를 잘 예측하였으며 정자천 소유역이 선택되었다. 모의된 완충지대에서는 연평균 940 m3/ha의 유출량이 감소되는 것으로 유사농도는 28.7 %의 저감효과를 보였다. 그러나 T-N, T-P의 농도는 오히려 증가되었는데 본 연구에서 고려된 보다 수변완충지대를 조성할 때 지하수 수위, 식생 성장변화 등과 같은 보다 정확한 설계 인자 산출 및 모델 DB 개발이 유역모델에 포함되어야 할 것으로 판단되었다.한 해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어 산화물질 해독에 관

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.136-143
• /
• 2011

The oversized and slotted holes are frequently required for the built-up in construction sites. The foreign provisions specify the reduction of the slip load subjected to the size of bolt holes and the direction of load. There are no domestic building codes and researches on the bolt holes. Therefore, it is necessary to evaluate a change of joint strength quantitatively according to the bolt-hole size and surface condition by means of experiment. This study was conducted to evaluate the slip load subjected to the size of bolt holes, and measured on a change of clamping force of high strength bolts during 168 and 800 hours to analyze the trend of relaxation after fastening bolts. Torque shear bolts defined on KS B 2819 was used for the specimen. Test results exhibit that the variation on the slip load of the others was below 10% by contrast with the standard hole and the highest rate of relaxation was 2.66% of the initial clamping force at the case of the long-slotted hole of 2.5D.

• Korean Journal of Materials Research
• /
• v.8 no.5
• /
• pp.408-412
• /
• 1998

Thermoelectric properties of Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$(0.05$\leq$x$\leq$0.25) prepared by mechanical alloying and hot pressing, were investigated. Contrary to the p-type behavior of single crystals, the hot-pressed Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$ exhibited ntype conduction without addition of donor dopant. When $Bi_2(Te_{0.85}Se_{0.15})_3$powders were annealed in (50% $H_2$ + 50% Ar) atmosphere, the hot-pressed specimen exhibited a positive Seebeck coefficient due to the reduction of the electron concentration by removal of the oxide layer on the powder surface and annealing-out of the excess Te vacancies. Among the Bi$_{2}$(Te$_{1-x}$Se$_{ x}$)$_{3}$fabricated by mechanical alloying and hot pressing, $Bi_2(Te_{0.85}Se_{0.15})_3$ exhibited a maximum figure-of-merit of 1.92 $\times$ $lO^{-3}$/K.