Browse > Article
http://dx.doi.org/10.11112/jksmi.2011.15.2.136

Evaluation on the Behavior of Slip Critical Joints with TS High Strength Bolts Subjected to a Size of Bolt Holes  

Lee, Hyeon Ju (한전 전력연구원)
Kim, Kang Seok (한전 전력연구원)
Nah, Hwan Seon (한전 전력연구원)
Lee, Kang Min (충남대학교 건축공학과)
Kim, Hyun Chul (충남대학교 건축공학과)
Publication Information
Journal of the Korea institute for structural maintenance and inspection / v.15, no.2, 2011 , pp. 136-143 More about this Journal
Abstract
The oversized and slotted holes are frequently required for the built-up in construction sites. The foreign provisions specify the reduction of the slip load subjected to the size of bolt holes and the direction of load. There are no domestic building codes and researches on the bolt holes. Therefore, it is necessary to evaluate a change of joint strength quantitatively according to the bolt-hole size and surface condition by means of experiment. This study was conducted to evaluate the slip load subjected to the size of bolt holes, and measured on a change of clamping force of high strength bolts during 168 and 800 hours to analyze the trend of relaxation after fastening bolts. Torque shear bolts defined on KS B 2819 was used for the specimen. Test results exhibit that the variation on the slip load of the others was below 10% by contrast with the standard hole and the highest rate of relaxation was 2.66% of the initial clamping force at the case of the long-slotted hole of 2.5D.
Keywords
High strength bolts; Hole size of bolts; Slip load; Slip coefficient; Relaxation;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 김강석, 나환선, 이현주, 김진호, "TS 고력볼트 마찰접합부의 구멍 크기에 따른 장기축력이완 평가", 한국강구조학회 학술논문집, , 2008,
2 김진호, 우해성, 최성모, "고력볼트 마찰접합부의 설계기준 및 내력에 관한 연구", 대한건축학회 논문집, Vol.19, No.4, 2008, pp. 27-35.
3 이승용, 조선규, 장동일, "고장력 볼트 이음부의 정적 및 피로 거동에 관한 연구(II)", 대한토목학회 논문집, 1998, Vol.18, I-5, pp 725-736
4 이승용, 박용훈 외 2, "과대공을 갖는 고장력 볼트 이음부의 역학적 거동에 관한 시험 및 해석적 연구", 한국강구조학회 논문집, Vol.10, 1998, pp 355-367
5 日本建築學會, 高力ボルト接合設計施工ガイドブック, 2003
6 Geoffrey L. Kulak, "Guide to Design Criteria for Bolted and Riveted Joints", 2nd Edition, AISC, Inc., 2001 7.
7 MINITAB R15 Program Manual , 2008
8 RCSC, Specification for Structural Joints Using ASTM A325 or A490 Bolts, Research Council on Structural Connections, 2004