• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.1
• /
• pp.26-33
• /
• 1994

A tobacco ripeness grading meter was designed and constructed using the color sensor, its performance was evaluated. A degree of ripeness grading of a leaf is very closely related to the measured tobacco leaf color. Measuring the small amount of the reflectance precisely depends on the apparatus including color sensor, light source, detector sensitivity, and geometric characteristics of appratus. To analyze and minimize the variational effects, experiments to select the proper condition were performed. Because of the combined effect mentioned above, the system has some variation on its response. Basis on the results of the experiments, prototype was developed and interfaced to a computer system. The main components of prototype included a tungsten lamp as a light source, Amorphous full color sensor with three filters, regulated D.C. power supply, OP - AMP(741 TC) for amplification, AR - B3001 board for interfacing to a computer with analog to digital conversion, and a compatible IBM PC XT computer. The experimental results of the developed ripeness tobacco leaf measurement system are summarized as following: [1] The output readings of ripeness grade meter for tobacco leaf, which is based on harvesting time, showed the apparent difference in variety of different quality. It was considered suitable that three filters(red, green, blue) in Amorphous full color sensor could be used in four different ripeness degree measurement of tobacco leaf. [2] The output readings of ripeness grade meter for tobacco leaf, which is based on government procurement, showed apparent difference in variety of different quality. Tobacco leaf varieties to stalk position are divided into tips, leaf, cutters, and primings, It is considered suitable that only red filter in the sensor could be used to classify the grade of tobacco leaf within the same kind tobacco stalk. However, the ripeness grade meter was not adequate to classify all the tobacco grades in the four different tobacco leaves.

• Journal of Life Science
• /
• v.29 no.3
• /
• pp.311-317
• /
• 2019

To investigate the effects of light on growth in fish, olive flounder (Paralichthys olivaceus) were reared under four kinds of monochromatic light-emitting diodes (LEDs) at violet (400 nm), blue (465 nm), green (508 nm), and red (635 nm) wavelengths, along with a white fluorescent lamp as control. The rearing experiments were carried out with 15 fish per tank under different wavelength illumination at the same intensity. After rearing the fish under a 12 hr:12 hr light:dark photoperiod for 60 days, percentage increases in weight gain of $269.92{\pm}13.02$, $363.21{\pm}3.74$, $433.22{\pm}4.83$, $290.17{\pm}11.83$, and $340.74{\pm}26.58%$ and increases in specific growth rates (SGR) of $2.18{\pm}0.06$, $2.56{\pm}0.07$, $2.79{\pm}0.01$, $2.27{\pm}0.05$, and $2.47{\pm}0.10$ were observed in fish grown under the illumination of red, blue, green, and violet LEDs and the white fluorescent light, respectively. The results show faster growth in fish reared under green LEDs, but slower growth in those reared under red light. Differences in most blood parameters were minor, aside from an increased level of glutamic oxaloacetic transaminase in the fish grown under red LED illumination. Histological analysis of the retina showed few changes in the ratio of photoreceptor layer thickness to total retina thickness in fish reared under the green LEDs compared to those in other illumination groups. These results indicate that green LED light can foster increased growth in olive flounder with no distinct harmful effects on their light-sensitive photoreceptor layers.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.2
• /
• pp.25-30
• /
• 1987

In order to investigate the effect to antioxygenic substances in Pine Needles on the photooxidation of linoleic acid (linoleic acid 100mg/10ml ethanol) added antioxidants and antioxygenic substances in Pine Needles was irradiated by the tungsten lamp attached with red fitter. The Photo oxidation of linoleic acid (LA) was conformed with Lea method and rhodan method. The following results were obtained: 1. Photooxidation of LA was greatly increased the presence of photosensitizer. However the Photo oxidation of LA without photosensitizer was smoothly increased by the irradiation. 2. The Photo oxidation of LA without irradiation occured quite lately whether photosensitizer was present or absent. 3. Photooxidation of LA under the presence of photosensitizer was inhibited by the addition of $dl-{\alpha}-tocopherol$ and the acetone fraction of methanol extract of Pine Needles but inhibited by BHT. Photooxidation of LA increased gradually as the addition of BHT increased but decreased gradually as that of acetone fraction increased.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.668-670
• /
• 1999

We have developed a automatic surface inspection system for cold Rolled strips in steel making process for several years. We have experienced the various kinds of surface inspection systems, including linear CCD camera type and the laser type inspection system which was installed in cold rolled strips production lines. But, we did not satisfied with these inspection systems owing to insufficient detection and classification rate, real time processing performance and limited line speed of real production lines. In order to increase detection and computing power, we have used the Dark Field illumination with Infra_Red LED, Bright Field illumination with Xenon Lamp, Parallel Computing Processor with Area typed CCD camera and full software based image processing technique for the ease up_grading and maintenance. In this paper, we introduced the automatic inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms. As a result of experiment, under the situation of the high speed processed line(max 1000 meter per minute) defect detection is above 90% for all occurred defects in real line, defect name classification rate is about 80% for most frequently occurred 8 defect, and defect grade classification rate is 84% for name classified defect.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.6
• /
• pp.480-486
• /
• 2006

The radiation characteristics of a high-luminance light-emitting diode (LED) light source were studied to evaluate its potential as an energy-saving light source for fishing lamps. The angle of the LED light source with 50% illuminance was $8-15^{\circ}$, and it had strong directional characteristics. The wavelengths at which the radiance and irradiance were maxima were 709, 613, 473, 501, 525, and 465 nm for red, orange, blue, peacock blue, green, and white light, respectively. The underwater transmission characteristics of the LED light source were superior in the order blue, white, peacock blue, and green in optical water type I: blue, peacock blue, white, and green in optical water type II; and blue, peacock blue, green, and white in optical water type III. Setting the underwater transmission characteristics of the LED light source in optical water type I at 100%, the transmission of water types II and III decreased to 67 and 17%, respectively. Based on the underwater transmission characteristics calculated in optical water types I-III, the blue and peacock blue LED light sources can be used as an energy-saving light source for fishing lamps.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.165-168
• /
• 2003

최근 TV 대응 LCD 제품의 본격적인 양산과 더불어 LCD TV 의 색재현성에 대한 해결과제가 큰 문제로 대두되고 있으며, CRT 급 색재현성의 확보는 LCD TV 의 고급화를 위한 또 하나의 개발 방향이 되고 있다. 그러나, CF(Color Filter)만을 이용한 색재현성의 개선은 근본적으로 한계를 가지고 있으며, 패널 투과율의 저하로 이어져 또다시 고휘도 사양의 BL(Back Light)에 대한 요구가 발생하고 있다. 따라서 본 연구에서는 CF(Color Filter)만에 의한 색재현성의 개선이 아닌 BL 광원 자체의 스펙트럼 최적화를 통해서 CRT 급 색재현성의 확보를 통한 고부가가치 상품개발의 가능성을 제시하고자 하였다. 구체적으로, 램프형광체의 RED 와 Green-Blue 영역에서의 Intensity 향상을 통해서 기존의 CCFL(Cold Cathode Fluorescent Lamp)과는 다른 특성을 광원에 부가하여, 기본의 LCD 패널을 그대로 이용한 경우에도 색재현성을 약 11% 개선하였다.

• Journal of Life Science
• /
• v.23 no.5
• /
• pp.669-675
• /
• 2013

The stability of monascus pigment produced by Monascus sp. MK2 was investigated according to light, pH, temperature, organic acid, synthetic antioxidant, and natural substance. The light stability was increased (sun light < fluorescent lamp < ultraviolet rays < dark condition) when storing the monascus pigments. Although the monascus pigments were stable in the range of pH 3.0, the degradation rate of pigment was increased at pH 11.0. The stability of monascus pigment gradually decreased as temperature increased. In addition, pigment stability was increased by adding the synthetic antioxidant and natural substance.

• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• KIEAE Journal
• /
• v.7 no.5
• /
• pp.35-40
• /
• 2007

The purpose of this study is to execute evaluation experiment to know the evaluation property of lighting environment of residential space for senior people, considering visual characteristics along aging, and finally provide basic data for the lighting plan to ensure the visual amenity. Processes of this study are as follows;1) Analyzed the variation property of visual sensibility and visual ability of senior people along aging. 2) Selected 3 types of life behavior(rest, conversation and reading) after checking life behavior in residential space for senior people based on advanced study. 3) Made the Mock-up Model that Dimming is possible, actual furnace to model. 4) Executed sensitivity evaluation experiment about lighting environment. 5) Analyzed evaluation property of lighting environment of residential space for senior people. Results of this study are as follows, 1) With lens-filter, we got comfort and amenity in bulb-color lamp which has similar color temperature with red of lens filter. 2) Lighting environment tests during conversation : With lens filters, they felt comfort on bulb color in case of higher illuminance than 850lux and daylight color in 500lux. 3) Lighting environment tests at reading : With lens filter, bulb color got better score in brightness and appropriateness than daylight color.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.737-743
• /
• 1995

Two step RTD(Rapid Thermal Diffussion) of P into silicon wafer using tungsten halogen lamp was used to fabricated very shallow n$^{+}$p junction. 1st RTD was performed in the temperature range of 800.deg. C for 60 see and the heating rate was in the 50.deg. C/sec. Phosphrous solid source was transfered on the silicon surface. 2nd RTD process was performed in the temperature range 1050.deg. C, 10sec. Using 2 step RTD we can obtain a shallow junction 0.13.mu.m in depth. After RTD, the Ti-silicide process was performed by the two step RTA(Rapid Thermal Annealing) to reduced the electric resistance and to improve the n$^{+}$p junction diode. The titanium thickness was 300.angs.. The condition of lst RTA process was 600.deg. C of 30sec and that of 2nd RTA process was varied in the range 700.deg. C, 750.deg. C, 800.deg. C for 10sec-60sec. After 2 step RTA, sheet resistance was 46.ohm../[]. Ti-silicide n+p junction diode was fabricated and I-V characteristics were measured.red.