• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.189-193
• /
• 2011

The current standard cost for recycling applied under the Extended Producer Responsibility(EPR) institution, is not coping with continuously increased number of obligatory subject items as well as a variety of variable cost changing factors regarding the recycling treatment cost caused by price fluctuation such as increased material and labor cost entirely across the society; changes in recycling treatment process following the developing technologies; and changes in the required work forces and equipments followed by the trends of automated facilities. Despite such various cost fluctuation factors, the current EPR is not coping with the trends, making the re-calculation process difficult, which causes differences between the real treatment cost for recycling. In this study, the analysis was made on main factors affecting on the related cost and the related price changing index was calculated, by conducting the influence evaluation on the standard cost factors of the current standard cost for recycling. Through theses results, more objective standard will be set for the re-calculation of standard cost for recycling to greatly contribute to setting up the midterm and long-term strategies in the future towards efficient institution.

• Journal of Environmental Health Sciences
• /
• v.39 no.3
• /
• pp.248-255
• /
• 2013

Objectives: The purpose of this paper is to define the level of recycling standards and its process in paper scrap. As pollution is increased by improperly treated paper scrap, the government has recently strengthened the management of the paper scrap. Methods: In this study, the current status of paper scrap recycling was investigated through a 2012 field survey, and the classification and recycling standards for paper scrap in developed countries and institutions were also investigated through a literature review in order to introduce optimal recycling standards. Results: As a result, the contents of contaminants were identified as the most important recycling standard, and the contents of contaminants in paper scrap was measured at less than 1.0% at most companies. The recycling standard for paper scrap was determined to be below 3% contaminants in the case of paper and 5% in the case of board. In this study, recycling stage was determined by considering regulations on resources and practices in the field. Conclusions: The recycling standard for paper scrap was determined to be below 3% and 5% contaminants for paper and board, respectively.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.121-126
• /
• 2011

The provisions regarding the standard cost for recycling stated under the Extended Producer Responsibility (EPR) since 2002, include different and complicated obligatory steps to be taken on a variety of subject items regarding the collection, the transportation and the treatment, making the corporations face in their calculating and executing the standard cost. This study presents more objective calculation scope and standard for the purpose of efficient operation of the standard cost for recycling, in consideration of the general industry perception toward cost issue as well as domestic/overseas case studies regarding the standard cost for recycling. Besides, the study presents the checking items and the calculation contents per step to calculate the standard cost for recycling. Therefore, it is expected not only to be used as the objective standard to calculate the standard cost for recycling, but also to contribute to increasing the work efficiency in the following ongoing re-calculation process and to maintaining the consistent operation of the institution.

• Clean Technology
• /
• v.18 no.4
• /
• pp.373-378
• /
• 2012

The end-of-life vehicles (ELV) are important recycling sources, and there are several stages involved in the recycling such as dismantling, shredding, and treatment of shredder residues (ASR). The legal recycling rate should be at least 95% on and after 2015, while we need a proper system to monitor recycling of ELV components and to calculate the practical recycling rate. The paper suggests a monitoring system that calculates practical recycling rates of dismantled components by use of a database of standard recycling rate as well as a web-based monitoring, which is linked to the Eco Assurance system for electric & electronic equipment and vehicle (EcoAS). Also the system supports dismantling and monitoring process by incorporating a standard vehicular component database, which facilitates recording dismantled weight data but also monitoring of dismantled components.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.193-199
• /
• 2011

In the past annual recycling obligation rate calculation of Extended Producer Responsibility (EPR) system, it was difficult to operate the system efficiently, because responsible producers passively participated in the scheme only bent on achieving annual obligation without long-term plan. Thus, a new scheme of long-term recycling obligation rate began to be established every five year from 2008 in order to give the basis for the notice of annual specific operation standard and recycling obligation, thereby helping responsible producers to make a preparation with a plan and giving expectation of active operation of the scheme. However, in the operation of long-term recycling target program, while the development of prediction models and the evaluation for existing items has been conducted in various ways, applications for a new target items and the evaluation are quite insufficient. Therefore, in this study, problems in implementing long-term recycling goal of new target items will be examined, and more objective and rational long-term recycling rate calculation and the operation standard will be proposed. Thus, the long-term recycling target will play a role as a pacemaker to steadily improve the recycling performance of target items, and responsible producers will be expected to increase the achievement with the realistic capacity.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.1
• /
• pp.94-103
• /
• 2004

The generation of construction waste has increased continuously in the recent years, becoming an important social issue. In this paper, the generation and treatment of construction waste in Korea was reviewed and a comparative analysis was performed between Korea and developed countries to suggest some efficient recycling strategies. The generation of construction waste has increased 4 times from 10 million ton/yr in 1996 to 40.3 million ton/yr in 2002. Of the construction waste generated in 2002, concrete debris waste occupied 60.4%. Approximately 14.5% of the construction waste is landfilled, 2,0% incinerated and 83.4% recycled, then the recycling rate might be relatively high. However, there is room for increasing landfill diversion. It is somewhat important to strenghten incentives for the outstanding recycling business. It is also needed to improve the recycled aggregate quality standard and impurity content standard. It is desirable to toughen the facility standard for the recycling aggregate business and the quality standard for the intermediate treatment business. Also, market for the intermediate product of the recycled aggregate should be activated. Finally, more recycling-oriented regulations governing the construction waste has to be developed with the efficient public education program.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.38-44
• /
• 2000

Compared to other waste, waste tire has much discharge quantity and calorie. When we use waste heat from waste tire, it can be definitely better substitute energy than coal and anthracite in high oil price age. To use as a basic data for providing low cost and highly effective heating system, following conclusion was founded. Annual waste tire production was 19,596 million in 1999, Recycling ratio was almost 55% and more than 8.78 million was stored. Waste tire has lower than 1.5% sulfur contain ratio which is resource of an pollution, So it is a waste fuel which can be combustion based on current exhaust standard value without any extra SOx exclusion materials. Waste tire has 9,256Kcal/kg calorific value and it is higher than waste rubber, waste rubber, waste energy as same as B-C oil. When primary and second air quantity was 1.6, 8.0 Nm$^3$/min, dry gas production time was 270min and total combustion time was 360 min. In the SOx, NOx, HC of air pollution material density were lower than exhaust standard value at the back of cyclone and dusty than exhaust standard value without dust collector.

• Journal of Animal Environmental Science
• /
• v.21 no.1
• /
• pp.9-20
• /
• 2015

The livestock manure recycling have been performed worldwide because of its environmental and economic benefits. However, domestic standard protocol was nothing for high solid manure. Therefore, This paper was conducted to review database configuration of manure characteristics, analysis methods, bio-methane potential test for high solid manure recycling. In American society of agricultural engineers standard, manure characteristics indicated about sort of thirty types. This is important information to determine for manure recycling method. Furthermore, in order to determine exact manure characteristics recommended that synchronized chemical analysis method among studies. Bio-methane potential tests are widely performed in studies about estimation of organic substrates methane production. Although various methods and parameters were used, was no standard protocol and guideline in domestic. Bio-methane potential test methods and parameters were reviewed through various researches. Consequently, this paper is expected that assist to additional studies and manure characteristic database.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.373-376
• /
• 2000

Recently, the life cycle of products is rapidly shortened and then the W s a l of the used mold applied in development of a product is a difficult things. In this study, we proposed a feasibility of the recycling mold base by analyzing of the existing standard mold base. And we developed a D/B program to promote the mold design capability with CAD. Also, we confirmed the possibility of recycling mold base by testing of a used automobile lamp mold.

• Korean Journal of Organic Agriculture
• /
• v.11 no.3
• /
• pp.91-108
• /
• 2003

So far, we have pursued only convenient and efficient growth of economy, as a result, environment surrounding us has been destroyed and the rights of our existence gotten to be even threatened. We need to ensure our lives and at the same time, need a power with which agriculture undertakes global circulation structure and a power that is able to preserve our environment we live per so. Therefore, in the near future, the final objectives of agriculture structure for 21st century would be to increase productivity of highly developed agricultural products in accordance with the ecosystem and a recycling agriculture. What is a recycling agriculture\ulcorner In the narrow sense, it means provisions-producing- system related to interactive recycle of material among forestry, livestock husbandry and seeding agriculture. In the broad sense, it means to produce credible agricultural product by keeping balanced resources via conversion to complete degradable material of organic wastes produce within rural village. Based on this concept, finally, our goal is to construct the resources recycling community. Environment friendly agriculture ⇒ organic agriculture ⇒ recycling (circulation) agriculture ⇒ construction of community with resources recycling. Therefore, in order to construct recycling agriculture, most of all, it is considered that the following, it should be established reasonable standard amounts for fertilizer, manure and liquid fertilizer based on results of soil test by each region, nature-recycling form of crops production and livestock production systems by maximizing utilization of different recycling byproducts occurring in the crop producing process by each region.