• 자원리싸이클링
• /
• 제6권2호
• /
• pp.42-46
• /
• 1997

PET병은 투명성, 경량성, 안전성, 내약품성 등이 우수하여 94년 현재 약 1,330 백만개가 사용되었으며 연평균 20%의 증가율을 나타내고 있으며 국내 PET병의 재활용율은 약 3%로 재활용체의 영세성, 시장변동 및 기술개발능력 부족 등의 문제를 안고 있다. PET병의 재활용기술은 Hydrocyclone process, Flotation process, Solution washigng process 등이 있으며 PET병을 생산하고 있는 삼양사에서는 Solution washing process를 도입하여 처리량 8,000 톤/년의 재활용 공장을 가동하여 재생 fiber용 뿐만 아니라 포장재용 등에 사용 가능한 재활용 제품을 생산하고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• 자원리싸이클링
• /
• 제33권2호
• /
• pp.24-36
• /
• 2024

리튬이온전지 재활용 공정은 직접 재활용, 습식제련공정, 건식제련공정으로 분류되어 왔으며, 습식제련공정 기반 상용공정은 해체, 파분쇄, 열처리, 선별 등으로 구성된 전처리 공정으로 블랙매스를 생산하고 습식제련공정으로 각 금속을 회수한다. 개발 중인 모든 리튬이온전지 재활용공정은 전구체 원료 제조를 위해 전처리공정 후 침출 등의 습식제련공정을 진행하기 때문에 이 글에서는 재활용공정의 전처리공정에 따른 분류법을 제시하였다. 현재 개발 중인 주요 공정은 황산염배소, 탄소열환원, 합금제조 등이며, 전처리공정에서 미이용 부산물의 활용이 가능할 경우 리튬이온전지 재활용 공정의 경제성 향상이 가능하리라 판단된다.

• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.555-562
• /
• 2013

The new recycling technology for aged aluminum wires in overhead conductor has been carried out. The authors are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The new recycling technology for aged aluminum wire in overhead conductor was composed of four steps in different develop process, destranding process for conductor, surface cleaning process, welding process and drawing process for aluminum wire. This paper investigates the properties during recycle process of aged aluminum wire. The results of microscopic analysis and mechanical properties were discussed to underscore recycling aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process. In conclusion, we confirmed the possibility of remanufacturing technique by using new process.

• 자원리싸이클링
• /
• 제32권1호
• /
• pp.13-20
• /
• 2023

이 글은 현재 국내 리튬이온전지 상용 재활용 공정을 정리하고, 리튬이온전지 재활용 공정의 새로운 방향을 제시한다. 대표적인 리튬이온전지 재활용 업체인 (주)성일하이텍은 10년 이상 리튬이온전지 재활용 공정을 성공적으로 운영해 왔으며 최근 많은 재활용 업체 및 배터리 제조업체들이 새로운 재활용 공정을 제안하고 개발하고 있다. 새로운 재활용 공정에서는 리튬 가격의 급격한 상승으로 니켈과 코발트보다 먼저 리튬이 회수되고, 금속 황산염 용액을 최종 제품으로 배터리 제조업체에 공급하는 특징이 있다. 향후 대량으로 발생할 폐전지 처리를 위해 기존 공정이 개선될 필요가 있으며, 폐기된 자동차와 함께 유입되는 성분들과 리튬이온전지의 새로운 첨가제는 향후 리튬이온전지 재활용 공정에서 주요 공정효율 저감 요인이 될 수 있다.

• 자원리싸이클링
• /
• 제21권1호
• /
• pp.3-16
• /
• 2012

도시광산 재자원화기술의 모듈과 한국의 비철제련 프로세스를 파악하기 위하여 재자원화기술의 전체상과 요소기술, 물리선별, 비철제련 프로세스 및 바람직한 도시광산 처리기술의 단위조작을 밝히고, LS-Nikko동제련(주)과 고려아연(주)의 리싸이클링 프로세스를 탐색하였다. 끝으로 일본의 대표적인 비철제련소인 DOWA Holdings 및 JX Holdings 리싸이클링 프로세스와 한국의 위 두 비철제련소의 리싸이클링 프로세스를 비교검토 하였다.

• 자원리싸이클링
• /
• 제23권1호
• /
• pp.80-85
• /
• 2014

전기로 분진에서 조산화 아연을 회수하는 리싸이클링 공정을 검토하기 위하여 국내 및 해외에서 가동되는 전기로분진 처리공정을 구성 단위공정별로 분석하였다. 이로부터, 조업 중인 공장 별로 가동 시기 및 공장 환경에 따라 세부 구성설비에 커다란 차이가 있음을 알 수 있었다. 따라서 새로운 전기로분진 처리설비를 설계하거나 도입할 때 필요한 설비와 반응측면에서의 기본적인 검토 인자들을 도출하였다.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.32-40
• /
• 2001

It is desirable to reduce the amounts of fresh water and reuse the recycled water in papermaking process. In an attempt to improve the efficiency of recycling water refining treatment and to enhance the productivity of OCC recycling mill, up flow anaerobic sludge blanket(UASB) reactor was developed and introduced to Korea recently. In order to maximize the operating efficiency and minimize the adverse side effects it is imperative to estimate and evaluate the total effects of new system, UASB on the whole OCC recycling process. This study was carried out with a view to investigate the effects of the high temperature and alkalinity of process water on the quality ad productivity of testliner of OCC recycling mill which is equipped with UASB reactor and almost closed. Another object of this study was searching for the best available use of UASB treated process water. The results were as follows; Reuse of UASB treated water characterized with high temp and alkalinity was useful to improve the strength and drainage properties of recycled OCC owing to its good points of promoting OCC disintegration and reducing the calcium hardness of process water. However, it might not be avoidable to induce the increase of dissolved solids in process water in accordance with direct introducing of UASB treated water into the former stage of OCC stock preparation. So it would be advisable to adopt the UASB treated water in the stage of clean, screened OCC stock.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.20-24
• /
• 2017

For process improvement and cutting down on expenses in solar cell industry, it is necessary to improve recycling process of wafer manufacturing. In this research, a study is introduced to develop classifier which is for recycling of abrasive. First of all, recycling process of wafer manufacturing is analyzed. And then, 3 steps of experiments such as oil removal, impurities removal and classification were executed. For the classification of slurry, a classifier is designed and manufactured. From experiments, it is verified that ultra sound vibration and flux are very important factors for classification. By experiencing the recycling processes and making devices, the technique can be initiated industry if needed such as decreasing waste and cutting down on expenses.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1289-1295
• /
• 2003

Most industrial products nowadays have been manufactured by being made up of many parts what these are made from various kinds of materials. These parts and goods should be disassembled simply and classified easily by material or kinds of parts for the recycling. But it is not so easy to know how to take disassembly ways and those orders must be known and also analyzed the assembled points and directions of the every part. This research presents an design process for recycling that it will be considering whole design process for recycling about easiness of disassembling units as the prior condition to reuse the parts and used material, and to reduce waste parts.