• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.141-150
• /
• 2022

To abate the environmental burden derived from the massive generation of cattle manure (CM), pyrolysis of CM was suggested as one of the methods for manure treatment. In respect of carbon utilization, pyrolysis has an advantage in that it can produce usable carbon-based chemicals. This study was conducted to investigate a syngas production from pyrolysis of CM in CO₂ condition. In addition, mechanistic functionality of CO₂ in CM pyrolysis was investigated. It was found that the formation of CO was enhanced at ≥ 600 ℃ in CO2 environment, which was attribute to the homogeneous reactions between CO₂ and volatile matters (VMs). To expedite reaction kinetics for syngas production during CM pyrolysis, Catalytic pyrolysis was carried out using Co/SiO2 as a catalyst. The synergistic effects of CO₂ and catalyst accelerate the formation of H₂ and CO at entire temperature range. Thus, this result offers that CO₂ could be a viable option for syngas production with the mitigation of greenhouse gas.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.34-40
• /
• 2005

Reusing of electroless Co-Cu-P waste solution was investigated in the respect of plating time, plating rate, solution composition and deposit. Plating time of cobalt-catalytic surface took longer than that of zincated-catalytic surface. It was possible to reuse the waste solution by mixing $50\%$ fresh solution at batch type. Plating time of initial solution at continuous type took longer 7.5 times over than that of batch type. Plating time of $50\%$ waste solution additive at continuous type took longer 2.5 times over than that of batch type. Component change of cobalt-topper for electroless deposition was greatly affected by deposit inferiority and rapid decrease in plating rate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.2
• /
• pp.29-37
• /
• 1997

Because food waste have high moisture content, landfill or incineration is not most suitable. The reuse of food waste by composting contribute to solve resourse, environmental, aglicultural problems. The purpose of this research is to optimise operating conditions and to develop new microorganisms for recycling of food waste by ultilizing small-scale composting equipment. The reduction rate of food waste was 75~85% by weight, and it was coincided with moisture reduction. When initial moisture was 25%, 45% and 60%, C/N ratio on based net weight was 9.8, 10.7 and 11. 8, respectively. And it was suitable for composting. But, The developed microorganism, PNU2, was better than existing commercial seed in the activity based on $CO_2$ concentration.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.4
• /
• pp.81-85
• /
• 2002

This study was carried out to investigate the effect of organic fertilizer(OM-1 : $300kgha^{-1}$, OM-2 : $600kgha^{-1}$), microorganism(ML : liquid form, MP : powder form) and seaweed extract ; ascophyllum nodosum(AF : foliar application, AI ; irrigation) on the growth and yield of the chinese cabbage. At the treatment of organic fertilizer OM-2 have appeared the best yield. According to the application of microorganism appeared certainly increasing yield of cabbage by application of powder form. The excess application of organic fertilizer OM-2 should not be occurred fertilizer damages and increased on the growth and yield by use of microorganism, In application of sewweed extract treatment, the cabbage yield increased by irrigation method.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.43-49
• /
• 2013

A study on the recovery of lithium and leaching behavior of NCM powder by hydrogen reduction for NCM system Li-ion battery scraps was investigated. The reductive rate was about 93% at $800^{\circ}C$ by hydrogen treatment. The lithium carbonate with 99% purity was manufactured by using $CO_2$ gas and washing method with water for NCM powder after hydrogen reduction. As a result of comparing the powders before and after the hydrogen reduction treatment for acid leaching behavior we obtained 32% enhanced leaching rate of cobalt, 45% enhanced leaching rate of nickel and the 90% leaching effect for manganese by hydrogen reduction at 2M $H_2SO_4$ concentration condition.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.47-52
• /
• 2005

Carbonate species in aqueous solution play an important role in the determination of chemical properties of water in relation with alkalinity, buffer capacity, biological productivity, and so on. These compounds also have reactive characteristics such as interphasal reactions between solid, liquid, and gas phases. In the absence of solid materials, the total amount and relative abundance of each carbonate species are directly influenced by the partial pressure of $CO_2$ gas in the atmosphere, which in turn significantly affects the properties of aquatic system. In the water/wastewater treatment process along with the wastes treatment and recycling process which occurring in aquatic environment, it is essential to figure out its characteristics for their optimization and one of its most influential features upon these processes is determined by carbonate species. To understand the fundamental aspect of the relationship between the partial pressure of $CO_2$ gas and chemical features of water, especially pH, the working partial pressure of pure $CO_2$ gas that produced by contacting the dry ice with water has been estimated based on equilibrium calculation. The equilibrium constants for the dissociation ot carbonic acid were determined using van't Hoff equation and the distribution diagram of carbonate species according to the pH has been constructed to substantiate the results of equilibrium calculation. The estimated working partial pressure of pure $CO_2$ gas was found to be a function of the concentration of carbonates in solution, which suggesting that Prior evaluation of the working partial pressure of gas is essential for a better understanding of aquatic interactions.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.109-113
• /
• 2004

In this study, we tried to develop the moveable instrument for fuel of cement production by using waste plastics from agriculture that was not recycled. First we investigated the burning character of recycled fuel and feasibility of second pollution. Then we made the instrument which can produce the solid fuel under 1cm size. In changing the inputting method from pre-heater to main burner, this reduces the NOx and O2 emission rate. and When we input it 0.5ton/hour, we obtain 0.2-0.3 ton/hour reduction of coal amount.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.79-87
• /
• 2012

With the increasing size and universalization of lithium-ion batteries, the development of cathode materials has emerged as a critical issue. The energy density of 18650 cylindrical batteries had more than doubled from 230 Wh/l in 1991 to 500 Wh/l in 2005. The energy capacity of most products ranges from 450 to 500Wh/l or from 150 to 190 Wh/kg. Product developments are focusing on high capacity, safety, saved production cost, and long life. As Co is expensive among the cathode active materials $LiCoO_2$, to increase energy capacity while decreasing the use of Co, composites such as $LiMn_2O_4$, $LiCo_{1/3}N_{i1/3}Mn_{1/3}O_2$, $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$, and $LiFePO_4$-C (167 mA/g) are being developed. Furthermore, many studies are being conducted to improve the performance of battery materials to meet the requirement of large capacity output density such as 500Wh/kg for electric bicycles, 1,500Wh/kg for electric tools, and 4,000~5,000Wh/kg for EV and PHEV. As new cathodes active materials with high energy capacity such as graphene-sulfur composite cathode materials with 600 Ah/kg and the molecular cluster for secondary battery with 320 Ah/kg are being developed these days, their commercializations are highly anticipated.

• Journal of Korea Foundry Society
• /
• v.35 no.4
• /
• pp.75-79
• /
• 2015

Commercial Zr-based amorphous alloy was recycled and oxygen was introduced during the recycling process. The oxygen content can have a great effect on the glass forming ability and the mechanical properties of the alloy. Therefore, it was closely examined. The initial oxygen content in the raw material was 1,244 ppm. It was increased to 3,789 ppm in the alloy after ten recycling processes. As the recycling processes were repeated, the oxygen content increased. Specifically, after four recycling processes, it increased sharply as compared to that after three recycling processes. After ten recycling processes, the glass transition temperature (Tg) increased from 613 K to 634 K and the crystallization temperature (Tx) increased from 696 K to 706 K. On the other hand, the super-cooled liquid region (${\Delta}T=Tx-Tg$) decreased slightly from 83 K to 72 K while the reduced glass transition temperature (Trg = Tg/Tm) was 0.63, remaining constant even when the oxygen content was increased. These results indicated that the increased oxygen content deteriorated the glass forming ability. The bending strength as determined in a three-point bending test showed a sharp decrease from 3,055 to 2,062 MPa as the oxygen content was increased from 1,244 ppm to 3,789 ppm; the extension was also decreased from 3.02 to 1.74 mm. These findings meant that the alloy became brittle.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.27-34
• /
• 2004

This experiment was carried out to examine the effects of morphology on properties of La-Co substituted SrM ferrite. The magnetic properties of calcined and sintered materials varied with the substitutional amount of La and Co elements in Sr-ferrite. In the substituted SrM ferrite, the atomic fraction x of La is directly related to the mole ratio n of iron oxide and the atomic fraction y of Co by equation x=2ny. The HcJ values of the calcined powder were about 270 kA/m and 240 kA/m with x=0.3 and K=0.2, respectively at stoichiometriy, n=6.0. Crystallites of the sintered material were grown with a plate shape, and their size decreased with increasing mole ratios. Such a shape was caused by the initial state of crystallite formed after calcination. In case of x=0.3 and n=6.0, Br was 415 mT and HcJ was 355 kA/m, and in x=0.2 and n=6.0, Br was 410 mT and HcJ was 370kA/m. The squareness in 2nd quarter of BH curve with x=0.2 was smoothly improved compared with x=0.3