• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.565-565
• /
• 2004

Due to limitation of resources and increasing concerns about environment, reverse logistics has received growing attention in recent years. In this paper, we propose three types of reverse logistics networks based on reuse of returnable containers, materials recycling process and remanufacturing for parts reuse. First, the sender in the re-usable item network supplies containers for the recipient and orders either new containers from external supplier or returnable containers cleaned from the container depot. Second, the recycling center in the proposed recycling network collects either end of life products from customer or faulty goods from manufacturer, collected products are dismantled into materials and materials go into recycling process. Finally, the manufacturer in the proposed remanufacturing network has two alternatives for supplying parts: either ordering the required parts to external supplier or overhauling disassembled parts and bringing them back 'as new' conditions. In this product recovery environment, we build optimal order quantity models to minimize the total logistics costs related to reverse logistics network. The validity of the proposed model is investigated through comprehensive computational experiments.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.53-59
• /
• 2021

Waste vinyl generated from household waste has been used as a solid refuse fuel (SRF) due to the presence of impurities such as soil, metal, and glass; however, the amount of SRF used has been decreasing owing to recent environmental problems, thereby necessitating the need for recycling. In this study, the mixed recycled raw material produced from household waste vinyl and polyethylene (PE) single recycled raw material produced from agricultural waste vinyl were examined. Raw material analysis revealed that waste vinyl was mainly composed of polyethylene, and approximately 2% of ash remained in the mixed recycled raw material, whereas no ash was found in the PE single recycled raw material. In addition, the analysis of tensile strength according to the mixing ratio of the two recycled raw materials revealed that the highest tensile strength was approximately 16 MPa under the heat treatment temperature of 200 ℃, compression pressure of 30 MPa, and a mixing ratio of 3:7 (mixed:PE single). In addition, the highest bending strength was approximately 39 MPa under the heat treatment temperature of 200 ℃, compression pressure of 30 MPa, and a mixing ratio of 3:7 (mixed:PE single). Therefore, the possibility of recycling waste vinyl was suggested by investigating the change in strength characteristics according to the mixing ratio of the recycled raw materials.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.5
• /
• pp.591-595
• /
• 1997

An ex vivo assay determining the flavin-containing monooxygenase (FMO) activity in perfused rat liver has been developed by assessing the rate of thiobenzamide S-oxide (TBSO) formation from the infused thiobenzamide (TB). The hepatotoxicity by TB or TBSO was not a critical factor for maintaining the FMO activity for up to 50 min. The FMO activity expressed in nmoles TBSO produced/g liver/min was the same for the recycling and non-recycling perfusion. This implies that reduction of the oxidized TBSO back to the parent compound (TB) is negligible. Hydrolysis of the collected perfusates with either ${\beta}-glucuronidase$ or arylsulfatase did not increase the TBSO level and thus, TBSO does not appear to undergo conjugation either to glucuronide or sulfate esters. Thus, measuring the rate of TB S-oxidation in the isolated perfused liver with 1 mM TB for 50 min provides a useful tool for evaluation of the hepatic FMO activity in the absence of hepatic necrosis and without the interferences caused by further conjugation or back reduction of the TBSO to the parent TB.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.9-18
• /
• 2001

1. EAF Dust in Japan - Generation and Characteristics. The quantity of dust generated from EAF shops in Japan was estimated to be 520,000 tons/year in 1999. Extremely fine dust (or fume) is formed in the EAF by metal vaporization. Its characteristics such as chemical compositions, phases, particle size, leaching of heavy metal are mentioned. 2. EAF Dust Treatment Methods in Japan. In 1999, 61% of EAF dust was treated by regional zinc recovery processing routes, 25% went to landfill disposal, 4% was reused as cement material, and 10% was treated by on-site processing routes. The problems of EAF dust treatment methods in Japan are: (1) very high treatment cost, and (2) heavy environmental load (leaching of heavy metal, emission of dioxins, depletion of disposal sites, etc). It has been much hoped for that new dust management technology would be developed. 3. New technology of EAF dust treatment in Japan. In Japan, some new technologies of EAF dust treatment have been developed, and some others are in the developing stages. Following five processes are mentioned:. (1) Smelting reduction process by Kawasaki Steel, (2) DSM process by Daido Steel, (3) VHR process by Aichi Steel, (4) On-site dust direct recycling technology, and (5) Process technology of direct separation and recovery of iron and zinc metals contained in high temperature EAF off gas by the Japan Research and Development Center fur Metals.

• Journal of Energy Engineering
• /
• v.27 no.1
• /
• pp.40-50
• /
• 2018

Today, the development of industries and rapid urbanization has a profound impact on the human environment. It can be said that the environment in the craft village is most affected. The environment in these areas is severely degraded and depending on the type of production, the environment in the craft villages is different. In Phong Khe ward of Bac Ninh Province, Vietnam, there are over 204 small and large facilities of recycling and producing paper. The paper facilities produce about 200,000 tons of paper each year and the amount of paper produced is not less than 500 tons each day in Phong Khe. They are creating livelihoods for more than 6,000 workers and generating local budgets from VND- 50 billion to VND 60 billion per year. Despite this great contribution, the use of old machines and "backward" modes of production means that paper recycling has caused serious air, soil, and water pollution in the region. The specific objectives of this study were as follows: (1) provide an overview of paper production process in the Phong Khe paper craft village; (2) comprehensive literature review of the current status of water environment, atmosphere environment, soil environment and solid waste; (3) figure out about waste treatment in Phong Khe ward.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.281-288
• /
• 2005

실리콘웨이퍼 제조공정에서 발생되는 초산, 불산 및 질산을 함유한 폐혼산으로 부터 각 산을 분리한 후 재활용하기 위하여 기초 실험을 실시하였다. 용매추출 법을 이용하여 초산, 불산 및 질산을 분리하기 위해 최적 추출제를 선정 하였고, 단일 성분에서의 추출 및 탈거특성에 관해 조사하였다. 또한, 이성분계 혼합산에서 분배비를 조사하여 상호 분리성에 대해 검토하였다. 실험 결과 인산염계 추출제는 고급 알코올에 비해 각 산의 추출 능력이 높다는 것을 확인하였다. 초산과 질산의 이성분 혼합액에서는 고급 알코올을 사용하면 초산이 분배비가 높아 선택적으로 추출되는 것을 확인하였고, 초산과 불산의 이성분 혼합액에서도 인산염계 추출제 보다 고급 알코올 사용시 초산의 분배비가 높아 선택적으로 추출됨을 확인하였다. 한편, 질산과 불산의 혼합액에서는 인산염계 추출제를 사용하여 질산이 선택적으로 추출됨을 확인하였다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.05a
• /
• pp.143-148
• /
• 2004

고로슬래그 미분말과 플라이 애쉬와 같은 재료들이 콘크리트의 내구성과 장기강도 증진을 목적으로 혼합재로서 사용되고 있다. 본 연구에서는 고로슬래그 사용 몰탈의 내구성 증진 특성을 활용하기 위하여 고로슬래그 미분말에 알칼리 자극제를 첨가한 알칼리 활성화 슬래그계 무기결합재 사용 몰탈의 내구성과 물리적 특성을 평가하였다. 실험결과, 몰탈의 초기 압축강도 발현에 알칼리 자극제가 큰 영향을 미치는 것을 확인하였다. 또한 알칼리 자극제가 첨가된 몰탈의 화학적 저항성을 평가하기 위하여 공시체를 재령 28 일 후, 5% 황산($H_2SO_4$) 용액에 침지하여 압축강도 및 질량 변화를 관찰하였다. 그 결과, 보통포틀랜드 시멘트로 제조한 몰탈의 경우, 황산용액 침지 후 압축강도가 54% 감소하였다. 반면 고로슬래그 미분말을 첨가한 몰탈의 경우, 약 10% 강도가 감소하였다. 질량변화의 경우, 보통포틀랜드 시멘트로 제조한 공시체는 17%, 고로슬래그 미분말을 첨가한 몰탈은 3%의 질량변화를 보였다. 이 결과로서 고로슬래그 미분말을 첨가한 몰탈의 경우, 화학적 저항성과 물리적 특성이 우수한 것을 확인하였다.

• Resources Recycling
• /
• v.11 no.5
• /
• pp.11-15
• /
• 2002

China is a large country fer the production of magnetic materials because of its cheap price and abundant raw materials. The total yield of ferrite occupies about 20% fraction in the market of the world. In this report, the characteristics and the yield of the ferrite magnet produced in China were displayed. Also the distribution of manufacturers and research institutes and the Chinas 10th five-year-plan on the magnetic materials were reviewed.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.152-156
• /
• 2005

• Resources Recycling
• /
• v.22 no.2
• /
• pp.29-36
• /
• 2013

Although Korean domestic production of flat panel displays totalled more than 48 trillion KRW in 2007, most of the flat panel display wastes have been land-filled or incinerated, which greatly overshadows Korean national prestige as a world leading producer and developer of flat panel display devices. Countries such as Japan or EU possess quite limited land-fill capability and have sought ways to dispose of WEEEs from environment-friendly perspective rather than recovery of valuable materials from the wastes. Considering relatively short cycle of about 5 years for flat panel display devices, it is estimated that more than 5 million units will be accumulated as wastes by 2015. Urban mining is a most suitable countermeasures against China's monopoly of rare and rare earth metals, which are contained in flat panel display wastes. Therefore, materials recycling of waste LCD units has to be developed and commercialized soon enough for economic and environment-friendly recovery of valuable resources hidden in LCD wastes.