• Clean Technology
• /
• v.18 no.1
• /
• pp.111-119
• /
• 2012

These days many companies are trying to reduce, recycle and reuse their wastes. Even though many wastes can be recycled, those are incinerated or landfilled. To solve these problems, there are many projects to make efforts to recycle wastes in especially the industrial complexes. But, due to the absence of information about waste recycling, recyclable wastes are still incinerated or landfilled. Based on these research background, this study aims to suggest the evaluation methodology of the $CO_2$ emissions and cost reduced by circulating the industrial waste to resource. We evaluated the environmental and economic effect between companies which emit the plastic waste and organic solvent waste and use them as raw-materials in the off-line recycling information exchange network. The environmental and economic aspects were analyzed comparing waste recycling with waste incineration. By recycling the plastic waste as raw-materials, $CO_2$ emission were reduced 1,070 ton in 2009 and 1,234 ton in 2010 and 657.4 million won in 2009 and 755.0 million won in 2010 were reduced. In recycling the organic solvent waste, 7.3 ton-$CO_2$ in 2010 and 5.6 ton-$CO_2$ in 2011 were reduced and 15.9 million won in 2010 and 12.2 million won in 2011 were reduced.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.24-28
• /
• 2005

Waste of the hydroponic solution from the plastic film house cultivation was recycled to grow the red pepper(Capsicum annum L.) in upland fields as supplement for plant nutrients and irrigation sources. Application of hydroponic waste solution increased the pH and EC of the soils, coupled with the increases in the concentrations of exchangeable cations(Ca, Mg, and K), total nitrogen, $NH_4-N,\;and\;NO_3-N$. Growth and yield of red pepper were highest when the treatment of chemical fertilizer(70%) was combined with hydroponic waste solution(30%). Amounts of the daily producing hydroponic waste solution were 2,880 L $ha^{-1}\;day^{-1}$ from the experimental facilities and this could irrigate $409.86m^2$ of area to compensate for the amount of water loss by evapotranspiration(3%). The overall results demonstrated that hydroponic waste solution could be recycled as plant nutrients and irrigation water resources for enhancing soil fertility and environmental quality.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.10-20
• /
• 2008

In order to study the behaviors of inorganic fillers in recycling of the waste agricultural plastic films, the washed PE fluffs from Shihwa and Jungeup Plant belonging to ENVICO were used respectively. First of all, the test pellets were manufactured by adding of inorganic fillers suchlike calcium carbonate and calpet by certain portions to PE fluffs and then the tested sheets were formed. The mechanical and thermal properties of the samples were measured and compared with others. The items measured were tensile, flexural, Izod impact, HDT, MFT, and so on. Morphologies were also investigated for various samples using the SEM. Finally, optimum ratios between recycled PE and inorganic additives were found out for the best products in physical condition as well as in economic point of view.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.70-81
• /
• 2020

Plastics that we use and simply throw away have a life span of about 500 years and barely decompose. The practice of producing and using common plastics needs to be challenged. Until now, they have been useful in the industrial structure of mass production, but it can be said that there is a lack of research into new materials to introduce and apply in terms of material recycling. As a result of this, we have come to the uncomfortable realization of the fact that we cannot incinerate or reuse these precious resources indiscriminately. No matter how well-designed a product is, it has a competitive advantage if production and consumption activities, waste, collection, sorting and treatment are considered in terms of a continuous cycle, and in this respect, Extended Producer Responsibility (EPR) can help. We are implementing the EPR system, and active industrialization in the field of recycling is required, which is also a challenge for producers to participate actively in recycling and seek to save and recycle resources in design and manufacturing. Against this backdrop, We would like to examine the possibilities, through various studies and developments on product design of recyclable materials, which is being conducted mainly in Europe. In particular, we would like to examine the methods, and value of solving environmental problems and the active efforts to achieve this in the design world, and in particular the case of product design using recycled plastics.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.469-477
• /
• 2021

In this study, the mechanical property of anti-fouling coating using CNF was evaluated to prevent the durability and stability of structure exposed the marine environment. Anti-fouling coating using CNF was prepared by CNF, AKD and waste glass powder, and contact angle test, drying time, viscosity analysis and microstructure were performed. When coating on one number of times, It was showed to relatively high hydrophobic performance in steel. And It was confirmed that the contact angle increased as the content of AKD increased in cement mortar. When coating on three number of times, the surface was confirmed super-hydrophobic at maximum of 151.6°. When mixing waste glass powder, the surface was showed to relatively high hydrophobic. It is pseudo plastic fluid when CNF and distilled water were prepared in a ratio of 1:1, And Anti fouling coating is judged to be suitable for use as coating on marine structure.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.69-77
• /
• 2017

Used small household appliances(small e-waste) consists of a variety of complex materials and components. The small e-waste is mainly composed of plastics and an important potential source of waste plastic. The black plastics, particularly are very difficult to separate by resin type and therefore these are mainly recycled in the form of a mixtures. In the present study, the sorting technologies such as gravity and electro static separation, near-infrared ray(NIR) and IR/Raman optical sorting separation on mixture of black plastics were analyzed and their limitations on sorting process were also investigated. The Laser Induced Breakdown Spectroscopy(LIBS) spectrum of each black plastics was used for identification of black plastics by resin type, and after analyzing the normalization operation, Principal Component Analysis(PCA) was carried out. The spectrum data was optimized through PCA process. In order to improve the identification accuracy and sorting efficiency of black plastics, it is necessary to design a classifier with high efficiency and to improve the performance and reliability of the classifier by applying the field of intelligent algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.365-368
• /
• 2021

In this study, a plastic bottle recycling bin system that utilizes an infrared sensor was implemented. The proposed system consists of a recognition unit, a control unit, an alarm unit, and a driving unit. The recognition unit detects the plastic bottle, measures the distance between the plastic bottle and the infrared sensor, extracts the value of the bottle, compares the extracted value with a standard range, and then transmits the control value to the control unit if the extracted value of the bottle is outside the standard range. In this case, the result of the presence or absence of a brand label or bottle cap is transmitted to the controller. The control unit opens the entrance of the recycling bin or alerts the alarm unit according to the result value transmitted from the sensor unit. In order to implement the proposed system, the recognition unit was implemented with an infrared sensor, and the control unit was made with an Arduino IDE controller, based on the C programming language. Additionally, the recognition unit and the control unit are able to communicate using analog signals. The proposed system accurately judges the presence or absence of a brand label and bottle cap of plastic bottles according to a predetermined algorithm. It then blocks the entrance of the recycling bin when a brand label or bottle cap is still attached. As the amount of waste discharged per person is relatively high and the majority of such waste is incinerated rather than recycled, the system proposed in this study is expected to increase the recycling rate of plastic bottles.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.276-284
• /
• 2022

In this study, performance evaluation and rheological characteristics were analyzed for recycling the fine powder of nuclear power plant dismantled waste concrete as a solidifying agent for radioactive waste disposal. The radioactive concrete fine powder was used to prepare a simulated sample, and the test specimen was prepared using Di-water, CoCl₂, and 1 mol CsCl aqueous solution as mixing water. Regardless of the aggregate mixing ratio and the type of mixing water, it satisfies the performance standard of 3.45 MPa for compressive strength at 28 days of age. All specimens satisfied the criteria for submersion strength, and the thermal cycle compressive strength satisfies the criteria for all specimens except Plain-50. As a result of evaluating the rheological properties of the solidifying agent, it was found that the increase in the aggregate mixing rate decreased the yield stress and plastic viscosity. The leaching index for cobalt and cesium of all specimens was 6 or higher, which satisfies the standard. In order to secure the stable performance of the solidifying agent, it is considered effective to use 40 % or less of the aggregate component in the solidifying agent.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.80-90
• /
• 2016

The idea of Sustainable, first mentioned in "Our Future (Bruntdland)" from the United Nations report released in 1987 has been highly affect design disciplines in developed countries in 21st century. It relocated industrial society and structure's attentions to nature and recourse conservation and reuse. Designed and manufactured products eventually disposed and it leads to waste of resources as well as creates environmental issues. Unfortunately, vast majority of designers starts designing without anticipation of this matter and produce more believing this leads to more sales. However shorter life of a product will create bigger increase of resource consumption and waste than, importance of re-usage and recycle will eventually increase. In modern furniture industry metal and plastics are frequently used beside wood that material has been diverse than in past. However, there are lack of plans and regulations of re-usage of those material due to difficulties of separating each different materials and collecting due to it's size. This study would like to look into recycling rate, methods and usage of three major materials (wood, metal, plastic) that is typically used in current furniture industries. Furthermore, see the potential of sustainable furniture by analyzing furniture practices made by each different recycled material from old furniture and what designers should consider to achieve feasibility of sustainable furniture.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.3
• /
• pp.159-165
• /
• 2005

The characterization of radiological contamination inside pipes generated during the decommission of a nuclear facility is necessary before pipes can be recycled or disposed. But, existing direct measurements of radioactive contamination level using the survey-meter can not estimate the characteristic of contamination on a local area such as the pipe inside. Moreover, the measurement of surface contamination level using the indirect methods has many problems of an application because of the difficulty of collecting sample and contamination possibility of a worker when collecting sample. In this work, plastic scintillator was simulated by using Monte Carlo simulation method for detection of beta radiation emitted from internal surfaces of small diameter pipe. Simulation results predicted the optimum thickness and geometry of plastic scintillator at which energy absorption for beta radiation was maximized. In addition, the problem of scintillator processing and transferring the detector into the pipe inside was considered when fabricating the plastic detector on the basis of simulation results. The characteristic of detector fabricated was also estimated. As a result, it was confirmed that detector capability was suitable for the measurement of contamination level. Also, the development of a detector for estimating the radiological characteristic of contamination on a local area such as the pipe inside was proven to be feasible.