• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.89-96
• /
• 2020

Solar lamp systems may not operate normally in the event of some system or controller failure due to internal or external factors, in which case secondary problems occur, which may cost the system recovery. Thus, when these errors occur, a technology is needed to recover to the state it was in before the failure occurred and to enable re-execution. This paper designs and implements a system that can recover the state of the system to the state prior to the time of the error by using the Watchdog Timer within the controller if a software error has occurred inside the system, and it also proposes a technology to reset and re-execution the system through a separate reset circuit in the event of hardware failure. The proposed system provides stable operation, maintenance cost reduction and reliability of the solar lamp system by enabling the system to operate semi-permanently without external support by utilizing the automatic recovery and automatic reset function for errors that occur in the operation of the solar lamp system. In addition, it can be applied to maintain the system's constancy by utilizing the self-operation, diagnosis and recovery functions required in various high reliability applications.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1157-1169
• /
• 2021

The disaster recovery refers to policies and procedures to ensure continuity of services and minimize loss of resources and finances in case of emergency situations such as natural disasters. In particular, the disaster recovery method by the cloud service provider has advantages such as management flexibility, high availability, and cost effectiveness. However, this method has a dependency on a service provider and has a structural limitation in which a user cannot be involved in personal data. In this paper, we propose a protocol using proxy re-encryption for data confidentiality by removing dependency on service providers by backing up user data using blockchain and distributed storage. The proposed method is implemented in Ethereum and IPFS environments, and presents the performance and cost required for backup and recovery operations.

• Journal of Korean Society of Transportation
• /
• v.25 no.1 s.94
• /
• pp.37-47
• /
• 2007

The Integrated Public Transport Reforms of the Seoul Metropolitan Government, which were implemented on the $1^{st}$ of July. 2004, launched a new fare allocation method. However, when a Private transit operator or a new transport system is introduced into the existing system, it will cause an allocation problem. Therefore, this study aims to Propose a rational fare allocation method which can be applicable regardless of the number of Public transportation modes or operators. To create alternatives, this study has adopted a fundamental principle of revenue allocation methods for the transit or communications sectors, and has applied it to the current transit system of Seoul. This study kas analyzed results of the cost recovery ratios and characteristics of each alternative through case studies. This study kas Presented an assessment criterion Z in order to select an optimal alternative. The criterion consists of the sum of the cost recovery ratio of each operator and the difference of the cost recovery ratio for each agency in inter-agency transit. Using the assessment criterion. the results showed that Alternative 1 is superior to the others : Alternative 1 is considering passenger-km of each operator and unit cost of passenger-km for each operator.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.2
• /
• pp.43-63
• /
• 2013

Remanufacturing is a process of recovering end-of-life products into serviceable parts for producing new products. Due to the limited supply of recovery cores to remanufacture, a remanufacturing firm also needs to produce or procure new parts for fulfilling the demand. This paper is targeted for solving the problem of determining the optimal amount of newly produced and remanufacturing parts, which is called production and remanufacturing planning (PRP) problem, under uncertain supply of recovery cores. The new production mitigates the risk of insufficient core supply while it takes more costs than the remanufacturing. The PRP model in this paper also considers disassemble-to-order (DTO) environment, in which multiple kinds of parts are remanufactured from multiple products on order of the parts. Whereas existing studies presents only heuristic solutions for DTO remanufacturing, this paper provides an exact solution for this problem and analytical sensitivity of the involved cost parameters, adopting multi-dimensional newsvendor modeling and stochastic linear programming techniques. The result shows that production and remanufacturing plans for multiple products are mutually dependent, and a change of cost parameters involved in only one part is propagated to all other parts.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.1-12
• /
• 2018

In the energy-guzzling industries such as steel making and cement, power plants utilizing waste heat have been attracting attention to increase energy efficiency. However, the existing economic analysis system doesn't consider the special working fluids and the cost models of the main equipment used in the waste heat recovery power plant. So it is difficult to estimate the plant economics accurately. Therefore, It is required to develop a economic analysis module that can more accurately evaluate for the power plant. In this study, the systems engineering approach was used to design and develop the module that systematically reflects the characteristics of the power plant and various requirements. Specifically, first, the special working fluids and main equipment applied to the power plant were investigated. Next, the cost models for each equipment were developed. Finally, the economic analysis module based on this was developed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.386-393
• /
• 2007

Charge-pump high voltage inverter for Plasma backlight using CIM(Current Injection Method) is proposed in this paper. Adoption of ERC(Energy Recovery Circuit) is a new attempt in high voltage inverter so that it is not only energy recovery but also improvement of discharge stability and system unstability which is interrupted by noise. Using a charge-pump technique enables low voltage switches to be usable, the cost can be reduced. CIM is adopted to achieve high speed energy recovery in proposed circuit. Operations of the proposed circuit are analyzed for each mode. The proposed circuit is verified to be applicable on a 32 inch plasma backlight panel by experimental results.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.77-84
• /
• 2015

Purpose: In 2008, As the green growth policy was presented, Green Building is made any effort to propagation. In this paper, the respective technologies that are able to considerably reduce the energy demands for heating, cooling, hot-water, lighting and ventilation among the variety of technologies were selected. Method: Design factors such as (1) External insulation, (2) Triple glazing window, (3) LED lighting, (4) External venetian blind, (5) Geothermal and (6) Heat recovery ventilator were derived. In addition, energy saving effects in terms of energy demand, energy consumption and energy cost were investigated using EnergyPlus, building energy analysis tool. Result : The results were as follows. (1) It can be seen that high insulated triple glazing window, heat recovery ventilator and external insulation technology is excellent for energy demand. (2) Unlike energy demand, saving effect of energy consumption and energy cost was shown in order of Geothermal > Triple Window > Heat recovery Ventilation> Insulation> LED Lighting > EVB Blind.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2833-2845
• /
• 2012

In this study, the amount of waste resource that could be recovered was analyzed. The installation and operation costs of waste resource recovery for both single- and multi-regional facility were calculated, and compared with the costs of landfill to investigate the feasibility of them. RDF(Refuse Derived Fuel) process and resource recovery by incineration process were considered as waste resource recovery facility. And, the multi-regions for cost analysis were established on the basis of the proper generation rate of municipal waste with the consideration of combustible ratio. The study results showed that single region facility for both RDF and incineration process has no economic benefit, compared with the landfill method. For the multi-regional facility, RDF process could save a large cost than the landfill method, but the incineration facility couldn't. Separate from the economic benefits, the waste resource recovery should be importantly considered when considering the depletion of fossil fuel, global warming, environmental toxicity, and the enormous expenses due to social conflict and confuse. When the CDM(Clean Development Mechanism) is vitalized in the near future, the additional economic benefits by CERs(Certified Emission Reductions) could be expected. CERs for RDF facility is corresponding to about 256.5 billion won, and CERs for incineration facility is corresponding to about 54 and 77.4 billion won for single- and multi-regional facility, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2235-2253
• /
• 2011

Digital document file such as Adobe Acrobat or MS-Office is encrypted by its own ciphering algorithm with a user password. When this password is not known to a user or a forensic inspector, it is necessary to recover the password to open the encrypted file. Password cracking by brute-force search is a perfect approach to discover the password but a time consuming process. This paper presents a new method of speeding up password recovery on Graphic Processing Unit (GPU) using a Compute Unified Device Architecture (CUDA). PDF files are chosen as a password cracking target, and the Abode Acrobat password recovery algorithm is examined. Experimental results show that the proposed method gives high performance at low cost, with a cluster of GPU nodes significantly speeding up the password recovery by exploiting a number of computing nodes. Password cracking performance is increased linearly in proportion to the number of computing nodes and GPUs.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.2
• /
• pp.103-108
• /
• 2003

This study was performed to find out drying characteristics and develop waste heat recovery dryer. this system was initiated in order to recover discharged waste heat of drying air from drying chamber in agricultural products dryer and recycle for additional heat source that could save drying cost. The system consists of drying chamber, fan, burner, circulation pump and heat exchanger made of fins and tubes. For the system performance, drying experiments with fresh pepper were conducted, and comparisons on fuel consumption amount and drying performance were made between conventional dryer and the heat recovery system attached dryer.