• 한국경영과학회지
• /
• 제38권2호
• /
• pp.43-63
• /
• 2013

Remanufacturing is a process of recovering end-of-life products into serviceable parts for producing new products. Due to the limited supply of recovery cores to remanufacture, a remanufacturing firm also needs to produce or procure new parts for fulfilling the demand. This paper is targeted for solving the problem of determining the optimal amount of newly produced and remanufacturing parts, which is called production and remanufacturing planning (PRP) problem, under uncertain supply of recovery cores. The new production mitigates the risk of insufficient core supply while it takes more costs than the remanufacturing. The PRP model in this paper also considers disassemble-to-order (DTO) environment, in which multiple kinds of parts are remanufactured from multiple products on order of the parts. Whereas existing studies presents only heuristic solutions for DTO remanufacturing, this paper provides an exact solution for this problem and analytical sensitivity of the involved cost parameters, adopting multi-dimensional newsvendor modeling and stochastic linear programming techniques. The result shows that production and remanufacturing plans for multiple products are mutually dependent, and a change of cost parameters involved in only one part is propagated to all other parts.

• ETRI Journal
• /
• 제42권4호
• /
• pp.468-479
• /
• 2020

The proposed AI processor architecture has high throughput for accelerating the neural network and reduces the external memory bandwidth required for processing the neural network. For achieving high throughput, the proposed super thread core (STC) includes 128 × 128 nano cores operating at the clock frequency of 1.2 GHz. The function-safe architecture is proposed for a fault-tolerance system such as an electronics system for autonomous cars. The general-purpose processor (GPP) core is integrated with STC for controlling the STC and processing the AI algorithm. It has a self-recovering cache and dynamic lockstep function. The function-safe design has proved the fault performance has ASIL D of ISO26262 standard fault tolerance levels. Therefore, the entire AI processor is fabricated via the 28-nm CMOS process as a prototype chip. Its peak computing performance is 40 TFLOPS at 1.2 GHz with the supply voltage of 1.1 V. The measured energy efficiency is 1.3 TOPS/W. A GPP for control with a function-safe design can have ISO26262 ASIL-D with the single-point fault-tolerance rate of 99.64%.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.21-26
• /
• 2008

본 논문에서는 Instantaneous locking 특성을 갖는 새로운 구조의 수동형 광가입자망용 622Mbps급 버스트모드 클럭/데이터 복원회로를 제안하고, 이를 구현하였다. 이 회로는 고속 클럭신호를 발생하는 위상고정루프 와 버스트모드에서의 클럭/데이터 복원회로 두 개의 블럭으로 구성되어 있다. 클럭/데이터 복원회로 에서는 위상고정루프의 클럭을 지연소자를 통해 7개의 서로 다른 클럭신호로 발생시킨다. 이 경우 광가입자망에 지터를 가지고 있는 신호가 입력되어도 항상 데이터의 중앙에 클럭이 정렬되도록 조정하여 최적의 샘플링 시점에서 데이터를 복원하게 된다. 제안한 구조에 대한 검증을 위하여 0.35umn-well CMOS 공정을 이용하여 회로의 동작을 확인하였다.

• 융합보안논문지
• /
• 제3권3호
• /
• pp.51-57
• /
• 2003

실시간 DBMS는 제한된 시간내에 사용자가 처리를 요청한 데이터를 가장 빠르고 안전하게 보관, 조작, 제어하는 기능을 제공해야 한다[3]. 이러한 실시간 제어 및 조작 기능을 담당하기 위하여, 실시간 DBMS 내에서 수행되는 트랜잭션에 대한 처리 과정의 상세 기록(로그)이 매우 중요하다. 본 논문에서는 이러한 기록을 기반으로 트랜잭션 로그에 대한 새로운 회복 기능을 제안한다. 본 회복 방안은 기본적으로 LIFO(Last-In-First-Out) 의 개념을 사용하였다. 제안하는 방법은 같은 속성을 가진, 연속적인 트랜잭션 로그를 효율적으로 기록, 처리 할 수 있는 방안이 될 것이다.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.44-51
• /
• 1998

It is well known that the fine bainitic microstructure obtained by TMCP(thermo-mechanical control process) secures the high toughness of base metal. Besides, TMCP steel is very suitable for high heat input in welding as it has low carbon equivalent. In HAZ, however, the accelerated cooling effect imparted on the matrix by the weld thermal cycles is relieved and thus the weldment of TMCP steel has softening zone which shows low fracture toughness compared with base metal. Therefore, PHWT of weldment is carried out to improve the fracture toughness in weldment of TMCP steel which has softening zone. In this study, the effects of PWHT on the weldment of AH36-TMCP steel are investigated by the small punch (SP) test. From the several results such as SP energy and displacement at room temperature, the behavior of transition curves, the fracture strength at -196$^{\circ}C$, distribution of (DBTT)sp and (DBTT)sp, the PWHT condition of A.C. after 85$0^{\circ}C$-1 sec W.C. was suitable condition for recovering a softening zone of HAZ as welded.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.19-24
• /
• 1999

This paper addresses a new project being carried out at Satellite Technology Research Center. The purpose of the project is to implement a system which receives, processes and stores 1m resolution satellite image transmitted at over 300Mbps down link data rates. In order to develop such a system, a system operational concept design and a requirements study were being carried out As a result of the operational concept design, system objectives, system context and system functions were defined. The system shall be operated according to the philosophy of maximum automation. rapid processing, reliability, integrity, cost effectiveness, and expandability. The system is divided into twelve independent processes and its behavior is modeled by operational scenario, which are combinations of independent processes. Process information and logs generated by the system shall be stored in databases and data received and generated be automatically archived and managed in a hierarchical storage device. The system shall have redundant components in order to be ready for recovering from sudden system failures. This paper will describe in detail the system operational concept design and the system requirements derived from the operational concept design.

• 한국실내디자인학회논문집
• /
• 제25호
• /
• pp.213-220
• /
• 2000

The meaning of light is not always developed aspect in process of architecture history as essence worth of the architecture. It means that architectural light is not affected simple development of civilization, but it has more complex aspect. The technology of applying architecture has continuous development of society that light is possible to extend quantity by development of technology because light is component not simple material or tools but strong worthy aspect, quality development of architecture comes true by exact understanding and application. Conversion from medieval society to modern society begins at the Industrial Revolution has new skills and materials, the architectural conform general space filled with non-characteristic light, and it gives rising to pursuit Utopia is not exist frequently. In result, light of metaphysical meaning is diminished and exterminated. In other hand light seems to be tools by development of technology in modern society, recovering its own meaning in other aspect. That light makes perfect image of architecture not by finite meaning only for simple space but by expressing strongly point that unify the whole architectural composition. Light is free from partial material of architecture. Light activates major composition through high-technology, and has possibility to carry out the essential worth animate architecture. The light expresses relative speciality for sense of place recognizes major component which the human being lives in and conform the real meaning of architecture.

• Journal of Construction Engineering and Project Management
• /
• 제3권3호
• /
• pp.35-41
• /
• 2013

All infrastructure projects are said to be inter-dependent, uncertain and labour-intensive in nature. There is no exception for building services sub sector. For a real time project such as 'The construction, extension and refurbishment of Employees' State Insurance Corporation (ESIC) Hospital at Tirupathy, India with total area of 45,000 square feet at an estimated cost of 1100 million rupees, a generic process model is developed to simulate the effect of set of identified variables on construction project. The 'Stocks and Flows' of dynamic model affords relevant insights to project managers, who apply this knowledge when designing better performance through more appropriate project planning. It is concluded from the model-based approach that building services works can be improved through specific better focussed managerial efforts, such as an increasing coordination effectiveness at the planning stage, clarifying prerequisite conditions prior to installations. Otherwise, pending works arising from work clashes can lead to knock-on effects resulting in productivity constraints and pressures, as well as more rework and demolition. Current study reveals that the model enables deep insight into various interdependent processes, their by improving construction performance levels, by addressing the dynamics of design errors and defective works, and recovering delayed schedule.

• 한국통신학회논문지
• /
• 제30권8C호
• /
• pp.775-782
• /
• 2005

비교정 연속영상(uncalibrated sequence images)에서의 조밀한 데이터로부터 3차원 재구성할 경우, 대량의 대응점 탐색 문제 및 계산시간 문제에 봉착한다. 본 논문에서는 이에 대한 대응책으로, 비교정 영상에서 중요영상 선택법을 제안하고, 이를 이용해 최소한의 영상으로 효율적인 3차원 재구성하는 새로운 방법을 제안한다. 즉 입력된 영상에서 소수만의 영상을 이용해서 작업을 수행하게 된다. 선택된 중요영상에서 대응점을 선택한다. 선택된 대응점은 카메라 교정을 수행하는데 이용된다. 외곽선 이미지를 이용하여 조밀한 형태의 대응점을 추출한다. 조밀한 대응점을 찾기 위한 제안된 알고리즘은 3차원 구조 복원을 효과적으로 수행하는데 이용된다.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1104-1111
• /
• 2003

본 논문에서는 직접 변환 방식의 수신기에서 발생하는 I 채널 및 Q 채널 간의 이득 및 위상 불일치를 보상하는 방법에 대해서 기술한다. 직접 변환 방식의 복조기에서의 이득 및 위상 불일치를 가변 스텝(Variable Step-size) 적응적 루프를 이용하여 블라인드(blind) 등화 방식으로 보상하는 알고리즘을 된 논문에서 제안한다. 이득 및 위상 불일치를 보상하기 위해 일반적인 블라인더 등화 기법을 이용할 경우 루프 이득에 따라 수렴속도와 지터(jitter) 영향이 trade-off 관계에 있다. 본 논문에서는 이들 문제를 극복하기 위하여 적응적 루프의 이득을 오차에 따라 가변 하는 방법을 제시한다. 본 논문에서는 가변 스텝 적응적 루프를 이용하여 빠른 수렴속도와 지터의 영향을 줄이도록 하는 방법을 제시하였고, 모의실험을 통하여 신호 손실 보상과 수렴 속도의 향상을 확인한다.