• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.653-657
• /
• 2004

The average bit error rate (HER) performance of a Gray coded arbitrary rectangular quadrature amplitude modulation (AR-QAM) signal with maximal ratio combining (MRC) diversity in an arbitrarily correlated Nakagami-m fading channel is derived and analyzed. The derived two types of general solutions are a simple closed-form and an integral form, depending on the types of the values (integer and non-integer) of the fading parameter. Using the derived equations in this paper, we analyzed the HER performances numerically based on the practical base station antenna configuration. The results show that MRC reception is a very effective scheme so far even though the combined signals are not independent each other because of the correlation values. The antenna height and separation of the MRC system relate to the correlation coefficient value between antennas, and go a long way with the diversity advantage. In particular, it is needed to be determined the antenna height that is carefully do for the diversity advantage because the correlation coefficient and the antenna height gain are contrary to each other from the aspect of the system performance. The expressions presented here can offer a convenient way to evaluate the exact HER performance of an arbitrary rectangular QAM signal with MRC diversity reception for various cases of practical interest on a correlated Nakagami fading channel.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.874-877
• /
• 1987

In this paper a DPLL circuit realizable by digital IC's is propose and the principles of general DPLL are described. An all Digital phase locked loop is designed, analyzed, and tested. In particular, the approach of invoking Gaussian assumption on the decision variable and based on S.O.Rices theory is used. As a performance of the above PLL detector operating on low data rate FSK is given and demonsrtated to be FSK reception.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.525-529
• /
• 2022

In the eLoran system, the Loran Data Channel (LDC) is used to provide precise timing and positioning. The LDC message can be modulated with the Eurofix method, which modulates the transmission time of the 3rd-8th pulse not used for navigation, and the 9th pulse method, which modulates data using the 9th additional pulse after the existing 8 Loran pulses. In this paper, we analyzed the reception performance of the LDC message transmitted from the eLoran transmitter according to the modulation method. The eLoran testbed transmitter in Incheon was set to transmit LDC messages simultaneously with the 9th pulse modulation method and the Eurofix modulation method. Then, the LDC messages stored in the databases of the eLoran differential stations in Incheon and Pyeongtaek were analyzed in terms of the message reception rate according to the modulation method. Using the navigation aid management ship Inseong No. 1, the range of LDC message reception of actual sea users near Incheon Port was also analyzed. The results of this study are expected to be utilized in the full operational capability service after the eLoran pilot service.

• Journal of the Korea Society for Simulation
• /
• v.21 no.4
• /
• pp.47-56
• /
• 2012

In this study, we use a parallel simulator PASENS(Parallel SEnsor Network Simulator) to predict power consumption and data reception rate of the hierarchical routing protocols for sensor network - LEACH (Low-Energy Adaptive Clustering Hierarchy), TL-LEACH (Two Level Low-Energy Adaptive Clustering Hierarchy), M-LEACH (Multi hop Low-Energy Adaptive Clustering Hierarchy) and LEACH-C (LEACH-Centralized). According to simulation results, M-LEACH routing protocol shows the highest data reception rate for the wider area, since more sensor nodes are involved in the data transmission. And LEACH-C routing protocol, where the sink node considers the entire node's residual energy and location to determine the cluster head, results in the most efficient energy consumption and in the narrow area needed long life of sensor network.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.59-66
• /
• 2001

In this paper, we propose a dynamic source routing protocol supporting asymmetric paths for mobile Ad Hoc networks that contain unidirectional links. At present, the existing dynamic source routing protocol supports only symmetric paths that consist of bidirectional links for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile terminals or current wireless environment. Thus, we implement a mobile Ad Hoc routing protocol supporting unidirectional links, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected. For performance evaluation, we consider the following factors: average route discovery time and average data reception rate. In order to obtain the factors of the performance evaluation, we did simulation for 900 seconds in the step of 100 seconds with the following scenarios: usage of route cache in intermediate nodes on route path, and different mobility/connection patterns.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.338-346
• /
• 2012

Wireless sensor network (WSN) technology provides a variety of medical and healthcare solutions to assist detection and communication of body conditions. However, data reliability inside WSN might be influenced to healthcare routing protocol due to limited hardware resources of computer, storage, and communication bandwidth. For this reason, we have conducted various wireless communication experiments between nodes using parameters such as RF strength, battery status, and deployment status to get a optimal performance of mobile healthcare routing protocol. This experiment may also extend the life time of the nodes. Performance analysis is done to obtain some important parameters in terms of distance and reception rate between the nodes. Our experiment results show optimal distance between nodes according to battery status and RF strength, or deployment status and RF strength. The packet reception rate according to deployment status and RF strength of nodes was also checked. Based on this performance evaluation, the optimized sensor node battery and deployment in the developed our mobile healthcare routing protocol were proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.456-468
• /
• 2008

In this paper, we design Input/Output modules as a preference work for implementation of hybrid two stage AWG based WDM-PON and verify operations of each function modules through the logic simulation. This WDM-PON system provides service to 128 ONUs through 32 wavelength and one wavelength is shared for upstream transmission with four ONU while each wavelength is allocated to each ONU for downstream transmission. The designed WDM-PON MAC chip is based on sub-MAC which consists of one control unit and reception unit and four transmission unit. To design the reception and transmission unit of sub-MAC, we define the functions of the sub-MAC, pins of the modules, control signal and timing of each signal. We intend to design MAC chip with 1Gbps transmission rate. Thus the designed MAC chip is worked on 125MHz clock rate. We define FSM and design Input/Output modules with VHDL. The logic simulation of the modules is executed by the ModelSIM simulator.

• Journal of Korea Multimedia Society
• /
• v.18 no.1
• /
• pp.25-34
• /
• 2015

Recently, in distribution market, demand for electronic shelf label system is increasing gradually to provide the accurate price immediately and detailed product information to consumers and reduce operation costs. Most of electronic shelf label system companies develop the full-graphic display device to display a wide variety of product information as well as the exact price. Our system had introduced Go-Back-N retransmission method in the early. However, we encountered performance problems that it delayed updating of the electronic shelf label system and exhausted the battery life time. Proposed adaptive image retransmission technique based on the selective scheme is that tags of electronic shelf label system recognize idle time of transmission cycle and require partial image retransmission to sever by itself. As a result, it can acquire much more opportunities of partial image retransmission within the same period and increase reception rate of full image for each tags. The experimental result shows that adaptive image retransmission technique's reception rate of full image for each tags is approximately 4% higher than existing previous works. And total battery life time increases 30 hours because tag reduce wake-up time as it receive only lost data instead of whole data.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.231-238
• /
• 2021

In addition to individual calls and group calls, the Trunked Radio System (TRS), which belongs to a group, can make calls simultaneously, and many users can use it within a limited time by adjusting the call time. Also, the LCX infrastructure network of the subway Most of the FM, firefighting radio, TRS of the National Police Agency and the terrestrial DMB service built in 2005 are commonly connected to the network for service and operation. In connection with the analysis, call reception sensitivity, handoff, interference with other signals, time delay, etc. were analyzed, and tests such as reception field strength for each output of the repeater and the success rate of the call terminal were conducted and the test results were analyzed. In addition, it will help TRS cell design and network construction by predicting equipment output capacity and service coverage based on test results.