• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1891-1897
• /
• 2009

This paper describes the optimization of the spectrum sensing in terms of the throughput of the cognitive radio (CR)system. The conventional rapers do not describe the optimization problem of the spectrum sensing by considering the channel search and channel move of the CR system to be caused by the appearance of the incumbent user. However this paper evaluates the throughput of the CR user by considering the situations such as the channel search and channel move additionally. Also, this paper suggests the sensing structure being separated the data receiver from sensing receiver, and compares the sensing performance for the same receiver structure of sensing and communication with that for the separated sensing receiver in terms of the throughput of the CR user. The numerical result demonstrates that the performance of the throughput efficiency is improved by the proposed sensing receiver to be separated from the data communication path.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.339-343
• /
• 2022

In this study, a method for simplifying the structure of the VDES RF receiver, and the gain control method of the receiver to comply with the international standard in this structure was described. The input level of the wanted signal and unwanted signal to the receiver was defined, and when the two signals were input, the saturation state at the ADC was checked at the receiver output. As a result of the simulation by the circuit simulator, it was satisfied that the output power of the receiver was in the SFDR region of ADC with respect to the adjacent channel interference ratio, intermodulation, and blocking level. Through this study, it was found that the structure of th proposed RF receiver conforms to the international standard.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.658-662
• /
• 2004

This paper proposes an orthogonal reception structure for OS/SS communication with time-shifted m-sequences, and compares the performances of the proposed and conventional receiver. This structure provides two important characteristics to reference user signal with not only increment of auto-correlation value but also cancel of the cross-correlation value out to zero between the reference user and other user signals. In addition, the structure can be easily implemented with the conventional receiver adding an additional integrator path in parallel and an adder that sums the conventional path output and the new path output signal. Hence, the proposed structure can be applied for channel impulse response measurement, and efficiently used for multi-user interference signal cancellation and channel capacity increment by flexible structural inter-working operation, connection or disconnection, of the new path to conventional receiver structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.47-55
• /
• 1994

This paper investigates the performance analysis of the packet DS/SS receiver with a PJED(phase-jump error detector) using the block signal processing(BSP) methods. The conventional packet DS/SS block receiver has a high probability of mistaking the phase-jump detection, which causes the frequency estimation error. The conventional receiver uses a Matched-Pulse Timing Extractor which has a complicated structure. The proposed packet DS/SS block receiver with the PJED which uses libearity of the phase has little probability of mistaking the phase-jump detection. The proposed Matched Pulse Timing Extractor gas the more simple structure but obtains the same performance on the exact matched-pluse timing as the conventional one does. The simulation results show that the proposed receiver gives about 2dB improvement in the BER compared with the conventional receiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.371-379
• /
• 2011

Active phased array antenna structure is used for modern multi-function radars. To search targets in high clutter environment, the radar receiver needs high dynamic range performance. Though active phased array antenna structure lead to increase of SNR, the SFDR is not increased. In this paper, high SFDR receiver of X-band active phased array radar was designed and manufactured. One channel digital receiver is connected to 32 T/R modules and one PCB assembly is composed to 2 channel digital receivers with RF part, ADC part, LO distribution part and digital down conversion part. A commercial FIFO board was used for digital receiver measurement about major performance in digital output signal condition. The measured digital receiver gain and SFDR is 33 dB and more than 81 dBc each.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.453-456
• /
• 2005

The ultra-wideband (UWB) signal radiation process in an antenna is different from that of a narrowband signal. In this paper, we study the degradation of the desired signal component according to the antenna structure and location of a receiver in a bipolar time-hopping UWB system. And we propose a receiver structure with an adaptive template waveform generator to compensate for the degradation caused by a realistic TX-RX antenna system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.96-99
• /
• 2016

Generally, bistatic clutter, contrary to the monostatic clutter, has nonlinear structure in Angle-Doppler domain due to the noncooperative motion of the transmitter and the receiver. In this paper, we first simulate the bistatic clutter structure resulting from the relative motion of the transmitter and the receiver and then analyze their relations through the bistatic clutter structure in Angle-Doppler domain. Also, we show the operation condition of the transmitter and the receiver leading to low rank of a covariance matrix of the bistatic clutter.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.93-101
• /
• 2006

In this study, we propose a joint inversion method, using genetic algorithms, to determine the shear-wave velocity structure of deep sedimentary layers from receiver functions and surface-wave phase velocity. Numerical experiments with synthetic data indicate that the proposed method can avoid the trade-off between shear-wave velocity and thickness that arises when inverting the receiver function only, and the uncertainty in deep structure from surface-wave phase velocity inversion alone. We apply the method to receiver functions obtained from earthquake records with epicentral distances of about 100 km, and Rayleigh-wave phase velocities obtained from a microtremor array survey in the Kanto Plain, Japan. The estimated subsurface structure is in good agreement with the previous results of seismic refraction surveys and deep borehole data.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.487-489
• /
• 2005

This paper proposes a symbol timing recovery method that is simple in structure and can provide high speed symbol synchronization. Transmitter and receiver are not synchronized in communication systems using digital modulation. Receiver should search the timing variation of transmitter continuously. The proposed timing recovery method searches sample position by comparing previous sample value with next sample value. This method can be applied to digital and optical transceivers with high data rate.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.154-157
• /
• 2000

One of the problems using DCR(Direct Conversion Receiver) type architecture are DC offset, Poor channel selectivity. APDP(Anti Parallel Diode Pair) can be mood candidate for the DCR frequency mixer due to its inherent 2nd harmonic suppression. APDP shows good IP2 and DC suppression. This paper describes single APDP LO power characteristics, IP2, and receiver structure utilizing APDP frequency mixer.