• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.19-29
• /
• 2019

This paper analyzes the design factors for GNSS anti-jamming receiver system in which the adaptive beamforming algorithm is applied in GNSS receiver system. The design analysis factors used in this paper are divided into three: antenna, beamforming algorithm, and operation environment. This paper analyzes the above three factors and presents numerical simulation results on antenna and beamforming algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.6-8
• /
• 2009

In this paper. we propose receiver algorithms for VHF(Very High Frequency) digital link mode-2(VDL Mode-2) systems. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in VDL Mode-2 systems. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering the amount of inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link. In this paper, we design the optimum receive filter and packet detection algorithm and evaluate the performance of receiver adopting the proposed receive filter and packet detection algorithm.

• ETRI Journal
• /
• 제9권2호
• /
• pp.24-35
• /
• 1987

A Design and Fabrication of 565 Mbit/s Optical Fiber Transmission Link We calculated the transfer functions of optical channel components and formulated the optimum transfer function of optical receiver for optical transmission to show a design rule of fiber optical link for digital transmission. And we evaluated various causes of sensitivity degradation to determine the receiver specification. Also we fabricated and demonstrated a 565Mbit/s single mode fiber optic link, 27km, to show the practicality of designed fiber optic link. The output power of the transmitter was above -3dBm, and the sensitivity of the optical receiver was -37.8dBm which is the same value we expected. Also the dynamic range was more than 25dB.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.381-388
• /
• 2022

In 2021, development of a regional satellite navigation system called KPS was approved. In this regard, various studies are in progress, but there is no published signal model. So, in relation to the user segment, it is necessary to design a user receiver, but there is no information. Therefore, in this paper, we assume a signal model that can be a candidate signal for KPS based on related studies. This signal uses CNAV-2 structure navigation message, truncated Gold code and BPSK modulation. Based on this signal, a simulator is designed that can be used for receiver design later. The simulator consists of a signal generator and a signal transmitter, and is verified using a software receiver and spectrum analyzer.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1073-1080
• /
• 2008

A GPS receiver platform has been developed to design an interference rejection filter and the platform is also able to evaluate performance of those filters. This platform consists of RF/IF part, data acquisition part and PC part. The RF/IF part converts RF signals to IF signals, the data acquisition part transmits the IF signals to PC using USB device. The PC part rejects the interferences with a filter and then it does navigation with GPS software receiver. The RF/IF part and data acquisition part had been validated with signal spectrum, and the PC part had been validated with the navigation results of GPS receiver. Finally, the entire platform including interference rejection filter has been confirmed with the navigation results in case that the GPS signals and interference entered this platform. As a result, the GPS receiver operated well against interference with 45dB JSR.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.47-52
• /
• 2004

본 논문에서는 FTTH에 적용하기 적합한 넓은 입력 다이나믹 레인지와 낮은 비트 에러율을 갖는 CMOS 광수신기의 설계를 제안한다. 트랜스임피던스 전치증폭기의 PMOS 피드백 저항을 자신의 출력 신호의 크기에 따라 제어하여 100Mbps까지 60dB의 입력 다이나믹 레인지를 얻었다. 듀티 에러를 최소화시키기 위해 전류 거울 형태의 자동 바이어스 조절 회로를 설계하였다. 2-폴리, 3-메탈, 0.6um CMOS 공정 파라미터를 사용하여 회로 시뮬레이션을 수행하였다. 설계된 수신기는 5V의 전원을 사용할 때 100Mbps에서 130mW 이하의 전력 소비를 보였다.

• Journal of Communications and Networks
• /
• 제17권1호
• /
• pp.1-11
• /
• 2015

In this paper, the transmission of an improper-complex second-order stationary data sequence is considered over a strictly band-limited frequency-selective channel. It is assumed that the transmitter employs linear modulation and that the channel output is corrupted by additive proper-complex cyclostationary noise. Under the average transmit power constraint, the problem of minimizing the mean-squared error at the output of a widely linear receiver is formulated in the time domain to find the optimal transmit and receive waveforms. The optimization problem is converted into a frequency-domain problem by using the vectorized Fourier transform technique and put into the form of a double minimization. First, the widely linear receiver is optimized that requires, unlike the linear receiver design with only one waveform, the design of two receive waveforms. Then, the optimal transmit waveform for the linear modulator is derived by introducing the notion of the impropriety frequency function of a discrete-time random process and by performing a line search combined with an iterative algorithm. The optimal solution shows that both the periodic spectral correlation due to the cyclostationarity and the symmetric spectral correlation about the origin due to the impropriety are well exploited.

• 디지털산업정보학회논문지
• /
• 제11권1호
• /
• pp.19-25
• /
• 2015

In this time, as an industrial society developed to a welfare society, more and more people want their quality of lives upgraded and specially customized service by mass production/mass consumption. And it leads to an increase of requiring service. There're active developments and studies on various IT equipment as the requirement made IT devices used in service. In this paper, we try to design and realize radio paging DID by using smart device to be used as a receiver of a radio pager which is broadly used at face to face service. Firstly, we used MCU to design and implement Wireless Calling Gateway which change radio calling signal of ISM band to smart device. A receiver of wireless caller used original receiver module. Also it used bluetooth module to communicate with smart device. It was possible to have satisfactory communication since radio paging signal converter and smart device were linked in 3M. Secondly, to indicate various paging information delivered from a radio pager, we realized DID application program by using Smart PAD. As a result, we could indicate various information compared to an original receiver which only could indicate letters or numeric data. Secondly, we implemented the DID app for wireless calls that can display a variety of information sent from a wireless pager. Was implemented using the Smart Pad. As a result, it is shown that can display a variety of information than the existing receiver.

• 한국통신학회논문지
• /
• 제29권9A호
• /
• pp.1005-1012
• /
• 2004

본 논문에서는 W-CDMA 단말기 표준안에서 요구하는 최소 성능을 분석하고 현재 상용화되어 있는 부품들을 사용하여 W-CDMA 단말기 수신부를 설계 및 제작하였다 표준안의 테스트 조건들로부터 수신 시스템의 최대 잡음지수와 IIP3 을 도출하였으며, 인접채널에 대한 선택도 및 프콘트 -엔드 단의 최소 성능을 경쟁하였다 제작에 앞 서 ADS 를 이용하여 성능검증을 하였으며 , 모두 분석된 최소성능을 만족하였다. 끝으로 W-CDMA 단말기 수신부 를 헤테로다인 구조로 R 단에서 IF 단까지 제작하였으며, 측정을 하였다 따라서 본 논문이 W-CDMA 단말기를 제작함에 있어 이론적인 설계 기준이 될 것으로 여겨진다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2010년도 제42차 하계학술발표논문집 18권2호
• /
• pp.203-207
• /
• 2010

본 논문에서는 레이더용 다중채널 수신기의 설계 및 제작 그리고 측정 결과를 소개한다. 설계된 다중채널 수신기는 주파수 X-대역에서 8개의 동일 특성을 갖는 신호를 수신 할 수 있으며, 80[dB]이상의 높은 동특성을 갖는다. 또한 직접수신처리를 위해 2개의 디지털복조처리기가 내장된 일체형이므로 수신경로의 손실을 최소화하였고, 자체점검 기능을 부여하여 시스템의 안정성을 확보하였다. 다중채널 수신기의 성능으로는 수신이득 $14{\pm}2[dB]$, 수신 잡음지수 19[dB], 수신 경로상의 크기와 위상 차이는 각각 ${\pm}2[dB]$, $10^{\circ}$이하를 갖는다.