• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.105-111
• /
• 2005

Purpose : Daily Q.A is the important step which must be preceded in a radiation treatment. Specially, radiation output measurement and laser alignment, SSD indicator related to a patient set-up recurrence must be confirmed for a reasonable radiation treatment. Daily Q.A proceeds correctness and a prompt way, and needs an objective measurement basis. Manufacture of the device which can facilitate confirmation of output measurement and appliances check at one time was requested. Materials and Methods : Produced the phantom formal daily check device which can confirm a lot of appliances check (output measurement and laser alignment. field size, SSD indicator) with one time of set up at a time, and measurement observed a linear accelerator (4 machine) for four months and evaluated efficiency. Results : We were able to confirm an laser alignment, field size, SSD indicator check at the same time, and out put measurement was possible with the same set up, so daily Q.A time was reduced, and we were able to confirm an objective basis about each item measurement. As a result of having measured for four months, output measurement within ${\pm}2%$, and measured laser alignment, field size, SSD indicator in range within ${\pm}1mm$. Conclusion : We can enforce output measurement and appliances check conveniently, and time was reduced and was able to raise efficiency of business. We were able to bring a cost reduction by substitution expensive commercialized equipment. Further It is necessary to makes a product as strong and slight materials, and improve convenience of use.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.15-20
• /
• 2014

Purpose - In general, researchers try to abide by the code of research ethics, but many of them are not fully aware of plagiarism, unintentionally committing the research misconduct when they write a research paper. This research aims to introduce researchers a clear and easy guideline at a conference, which helps researchers avoid accidental plagiarism by addressing the issue. This research is expected to contribute building a climate and encouraging creative research among scholars. Research design, data, methodology & Results - Plagiarism is considered a sort of research misconduct along with fabrication and falsification. It is defined as an improper usage of another author's ideas, language, process, or results without giving appropriate credit. Plagiarism has nothing to do with examining the truth or accessing value of research data, process, or results. Plagiarism is determined based on whether a research corresponds to widely-used research ethics, containing proper citations. Within academia, plagiarism goes beyond the legal boundary, encompassing any kind of intentional wrongful appropriation of a research, which was created by another researchers. In summary, the definition of plagiarism is to steal other people's creative idea, research model, hypotheses, methods, definition, variables, images, tables and graphs, and use them without reasonable attribution to their true sources. There are various types of plagiarism. Some people assort plagiarism into idea plagiarism, text plagiarism, mosaic plagiarism, and idea distortion. Others view that plagiarism includes uncredited usage of another person's work without appropriate citations, self-plagiarism (using a part of a researcher's own previous research without proper citations), duplicate publication (publishing a researcher's own previous work with a different title), unethical citation (using quoted parts of another person's research without proper citations as if the parts are being cited by the current author). When an author wants to cite a part that was previously drawn from another source the author is supposed to reveal that the part is re-cited. If it is hard to state all the sources the author is allowed to mention the original source only. Today, various disciplines are developing their own measures to address these plagiarism issues, especially duplicate publications, by requiring researchers to clearly reveal true sources when they refer to any other research. Conclusions - Research misconducts including plagiarism have broad and unclear boundaries which allow ambiguous definitions and diverse interpretations. It seems difficult for researchers to have clear understandings of ways to avoid plagiarism and how to cite other's works properly. However, if guidelines are developed to detect and avoid plagiarism considering characteristics of each discipline (For example, social science and natural sciences might be able to have different standards on plagiarism.) and shared among researchers they will likely have a consensus and understanding regarding the issue. Particularly, since duplicate publications has frequently appeared more than plagiarism, academic institutions will need to provide pre-warning and screening in evaluation processes in order to reduce mistakes of researchers and to prevent duplicate publications. What is critical for researchers is to clearly reveal the true sources based on the common citation rules and to only borrow necessary amounts of others' research.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.396-408
• /
• 2008

Statement of problem: Within the elastic limit of the screw, the greater the preload, the tighter and more secure the screw joint. However, additional tensile forces can incur plastic deformation of the abutment screw when functional loads are superimposed on preload stresses, and they can elicit the loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum preload that will maximize fatigue life and simultaneously offer a reasonable degree of protection against loosening. Another critical factor in addition to the applied torque which can affect the amount of preload is the joint connection type between implant and abutment. Purpose: The purpose of this study was to evaluate the influence of tightening torque on the implant-abutment screw joint stability. Material and methods: Respectively, three different amount of tightening torque (20, 30, and 40 Ncm) were applied to implant systems with three different joint connections, one external butt joint and two internal cones. The initial removal torque value and the postload (cyclic loading up to 100,000 cycles) removal torque value of the abutment screw were measured with digital torque gauge. Then rate of the initial and the postload removal torque loss were calculated for the comparison of the effect of tightening torques and joint connection types between implant and abutment on the joint stability. Results and conclusion: 1. Increase in tightening torque value resulted in significant increase in initial and postload removal torque value in all implant systems (P < .05). 2. Initial removal torque loss rates in SS II system were not significantly different when three different tightening torque values were applied (P > .05), however GS II and US II systems exhibited significantly lower loss rates with 40 Ncm torque value than with 20 Ncm (P < .05). 3. In all implant systems, postload removal torque loss rates were lowest when the torque value of 30 Ncm was applied (P < .05). 4. Postload removal torque loss rates tended to increase in order of SS II, GS II and US II system. 5. There was no correlation between initial removal torque value and postload removal torque loss rate (P > .05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.703-712
• /
• 2002

This study was carried out to examine the interest in menu and food purchase of housewives living in Yosu, Chonnam. The survey was conducted by questionnaire including question about general characteristics of the subjects, meal planning and food purchase from October to November in 2000. The major general characteristics of subjects are summarized as follows: The forties was 39%, having a job was 44.5%, a high school education was 53.0%, and 1~2 million won in monthly household income was 50.1%. A couple with children was 75% and a 3~4 headed family was 57%. An apartment resident was 67% and one's own house was 67%. The higher the education level was, the higher the percentage of menu preparation and necessity was significantly (p<0.0001). On grocery purchase, the percent of planned purchase was higher than that of impulse purchase, which was higher in housewives without a job. The subject's favorite place for grocery purchase was a traditional market. The higher the age of subjects and the lower the education level of subjects were, the higher the grocery purchase at a traditional market was. However, the younger subjects and subjects with higher education level preferred to purchase groceries in a mart stores in an apartment, and supermarkets in order (p<0.0001). The factors to be considered during purchasing grocery were freshness of materials, price, nutrient, and taste in order. The results of this study showed that it is necessary to educate older person for importance of planning menu and encourage housewives with a job to plan grocery purchase to provide nutritionally adequate meals at reasonable coast.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.415-440
• /
• 2018

On September 23, 2015, the Ministry of Education announced the 2015 revision of educational curriculum which aimed at 'cultivating creative talents' based on the Article 23, Section 2 of the Elementary and Secondary Education Law. As a result, music curriculum have also been partially revised, which seems to maintain the 2009 revision of music curriculum. Although Jeongganbo 井間譜 is already exposed in the music curriculum for the third and forth grades of elementary school, the learning content about how to read Jeongganbo and how to express the pitch and length of sound including the origin of its name and the background of its invention are dealt with specifically in the fifth and sixth grades. Jeongganbo is known as the oldest mensural notation in the Orient created by King Sejong of the Joseon Dynasty in the middle of the $15^{th}$ century, and it was used for the first time in Sejong sillok akbo 世宗實錄樂譜 (Scores in the Annals of King Sejong), the oldest musical score still in existence. However, in the music textbooks as well as the most of specialized books related to the Korean traditional music, it is uncritically accepted without providing clear grounds that Sejong invented Jeongganbo himself. If so, it is necessary to investigate on which grounds it is claimed that Sejong invented Jeongganbo. This paper first examined the grounds of the proposition that "Sejong invented Jeongganbo," which is introduced in the music textbooks for the fifth and sixth grades of elementary school, by separating it into Sejong's creation of Sinak 新樂 (new music), Sejo's invention of Jeongganbo and Sejong's invention of Hangeul. Next, this paper examined how the subject of the invention of Jeongganbo has been described in the textbooks for the fifth and sixth grades in elementary school based on the 2009 revision of music curriculum, and suggested the direction of a desirable music education by pointing out the related problems. According to historical records and circumstances such as Sejong's creation of Sinak, Sejo's invention of Jeongganbo with 16 Jeonggan (square) in one vertical line, Sejong's invention of Hangeul and so on, it seems to be the most reasonable that Sejong is the subject of the invention of Jeongganbo as of now. However, the attitude of the musical academy to accept and educate the unclear thing as if it is a fact does not seem desirable. Therefore, I suggest that it should be described "Jeongganbo was invented in the period of Sejong" or "it is supposed that Jeongganbo was invented by Sejong" rather than presenting "Sejong made Jeongganbo" or "created" until revealing the clear evidence about the subject of Jeongganbo.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Research in Community and Public Health Nursing
• /
• v.1 no.1
• /
• pp.465-502
• /
• 1989

The purpose of this study was to find out the general characteristics of school health teachers, the status of school health resources and the degrees of self-confident performance for the 124 school health teachers in Pusan City. Data was collected by means of questionaires from Aug. 1986 to Mar. 1987. The data were analyzed by use of percentage, mean, standard deviation, t-test, ANOVA and Pearson-correlation coefficient. The results of this study were as follows: 1 . General Characteristics of School Health Teachers (SHT) 1) The average of age of the SHT was 32.8 years old and 39.5% of them were from 30 to 34 years old. 2) The average for school nursing experience of the SHT was 7.9 years and 37.9% of them were from 5 to 9 years. 3) The 45.2% of them have not the clinical experience. 4) The 74.2% of them were graduated from the 3 years college of nursing. 2. Status of school health resources and nursing activities. 1) The average of student number was 2497.3 and class number was 45.2. 2) The average of school health budget was 1039000 won and 27.7% of school health budget expended on examination cost. 3) Only 29.0% of all schools have organization for school health. 4) The 84.7% of all schools have health clinic separately and 69.1% of schools have less than $33m^2$ sized. 5) The average of clinic visitor number was 2111.8 for 1 year. 6) Major problem was on digestive system. And other problems were skin, respiratory, musculo-skeletal system and dental problem. 7) The number of literal message was 14.4 times for 1 year. 3. The degree of the school health teachers' self-confidence. The school health teachers' self-confidence was deviced into 6 and the maximum degree was 4. 1) Program planning & evaluation; 2.8 2) Clinic management; 2.9 3) Health education, 3.0 4) Management of school environment; 2.7 5) Health care services; 2.7 6) Operating of school health organization; 2.4 4. Significances to the degree of self-confidence on school health nursing activities. 1) There was significant difference between clinical management and Religion (t=2.15 p<.05) 2) There was significant difference between Operating of school health organization and level of school (F=3.588 p<.05) 3) Program planning & evaluation: expending time for clinical management (r=-0.184 p<.05) expending time for health care services (r=0.273 p<.01) 4) Clinical management: use of separate health clinic (r=0.151 p<.05) 5) Health education: use of separate health clinic (r=0.170 p<0.5) 6) Health care services: No. of student (r=-0.144 p<0.5) No. of class (r=-0.160 p<.05) 5. The degree of the school health teachers' self-discipline. The school health teachers' self-discipline was devided into 2 and the maximum degree was 2. 1) Program planning & evaluation:1.8 2) Clinic management: 1.9 3) Health education: 1.9 4) Management of school environment: 1.7 5) Health care services: 1.8 6) Operating of school health organization.: 1.3 6. Significances to the degree of self-discipline on school health nursing activities 1) Program planning & evaluation; Level of nursing education (F=4.309 p<.01) 2) Clinical management: Level of nursing education (F=3.587 p<.05) 3) Operating of school health organization: School health organization (t=-2.68 p<.01) 4) Health care services: School health organization (t=2,58 p<.05) 5) School health performance: School health organization (t=2.32 p<.05) 6) Program planning & evaluation: School health experience (r=0.239 p<.01) Expending time for program planning & evaluation (r=-0.172 p<.05) 7) Clinic management: School health experience (r=0.249 p<.01) Expending time for dinic management (r=0.181 p<.05) No. of student (r=-0.158 p<.05) Expending time of program planning & evaluation (r=-0.199 p<0.5) 8) Health education: School health experience (r=0.234 p<0.1) Expending time of program planning & evaluation (r=-0.193 p<.05) 9) Management of school environment: Age of school health teacher (r=0.142 p<.05) School health experience (r=0.255 p<.01) 10) Operating of school health organization: Medicine Purchase (r=-0.163 p<.05) 11) Health care services: School health experience (r=0.148 p<.05) Medicine purchase (r=-0.229 p<.01) 12) Total school health performance: School health experience (r=0.200 p<.05) Medicine purchase(r=-0.168 p<.05) Based on the above results, the suggestions are as follows: 1) As the SHT take charge of the reasonable number of student, the students will have benefit of the good health service in quality. 2) It is recommended to use the health clinic separately and to arrange adequate place for good school health service. 3) It is necessary that the SHT participate budget for school health. 4) It is required to enhance self-confidence on school health nursing activities through continuous educational programs.

• The Korean Society of Law and Medicine
• /
• v.21 no.1
• /
• pp.153-185
• /
• 2020

In principle, even if serious consequences such as death or serious injury of a patient occur as a result of a medical accident, if the medical malpractice of a health care worker is not recognized, the health care worker is not held liable for said consequences. However, with the opening of the Korea Medical Dispute Mediation and Arbitration Agency on April 7, 2012, a system was established to compensate health care personnel for their medical malpractices only in the case of "injuries caused by medical accidents in the course of childbirth" (hereinafter referred to as "program for compensation of medical accidents"). Article 46 paragraph 1 of the current Medical Dispute Mediation Act, which is the basis of the Force Majeure Medical Accident Compensation System, stipulates that "medical accidents under delivery" claims are to be determined by the Medical Accident Compensation Review Committee are subject to the compensation project. And the details of the compensation, ratio of sharing financial resources for compensation, scope of compensation, and the guidelines and procedure for the payment of compensations are prescribed by Presidential Decree. In other words, the Presidential Decree requires the state to pay 70 percent of the compensation funds, and 30 percent of the above funds among health care providers. The Constitutional Court has decided on the 2015Hun-Ga13 that the scope of the health care institution's founders and the share of the compensation funds cannot be directly determined by the law, and that the portion delegated by the Presidential decree does not violate the Principle of Legal Protection nor Comprehensive Nondelegation Doctrine. However, this can be seen as an exclusion of accountability for force-induced delivery accidents even if there is no negligence of the medical staff. If the nature of the system is a type of social security system with a social compensatory nature, it could consider eliminating the health care innovator's cost-sharing provisions, leaving the full cost to the state. However, it is also necessary to review institutional protocols that strengthen the efforts of medical institutions in areas such as analysis of the causes of medical accidents and measures to prevent their recurrence. In addition, I think that the conclusion of the Act is in line with the purpose of the Comprehensive Wage Support Regulations that at minimum the law sets an upper limit of the compensation funds that are to be paid by health and medical institutions. Moreover, it is reasonable for the Medical Accident Compensation Review Committee to specify gestational age and weight of births, which are the criteria for compensation, under the Enforcement Decree of the Medical Dispute Mediation Act, in relation to the criteria for payment of contributions by the Medical Accident Compensation Review Committee, and to set the detailed criteria.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.451-464
• /
• 2022

The high-level nuclear waste repository is a deep geological disposal system exposed to complex environmental conditions such as high temperature, radiation, and ground-water due to handling spent nuclear fuel. Continuous exposure can lead to cracking and deterioration of the structure over time. On the other hand, the high-level nuclear waste repository requires an ultra-long life expectancy. Thus long-term structural health monitoring is essential. Various sensors such as an accelerometer, earth pressure gauge, and displacement meter can be used to monitor the health of a structure, and a piezoelectric sensor is generally used. Therefore, it is necessary to develop a highly durable sensor based on the durability assessment of the piezoelectric sensor. This study designed an accelerated life test for durability assessment and life prediction of the piezoelectric sensor. Based on the literature review, the number of accelerated stress levels for a single stress factor, and the number of samples for each level were selected. The failure mode and mechanism of the piezoelectric sensor that can occur in the environmental conditions of the high-level waste repository were analyzed. In addition, two methods were proposed to investigate the maximum harsh condition for the temperature stress factor. The reliable operating limit of the piezoelectric sensor was derived, and a reasonable accelerated stress level was set for the accelerated life test. The suggested methods contain economical and practical ideas and can be widely used in designing accelerated life tests of piezoelectric sensors.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.