• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.129-135
• /
• 2022

Currently, the rapid growth of electric vehicles and the collection and disposal of waste batteries are becoming a social problem. The purpose of this paper is to propose a fast and efficient battery screening method through a safe inspection and storage method according to the collection and storage of waste batteries of electric vehicles. In addition, as the resistance inside the waste battery increases, an instantaneous voltage drop occurs, and there is a risk of overcharging and overdischarging compared to the initial state of the battery. Accordingly, there are great difficulties in operation, so the final goal of this study is to develop a device for diagnosing aging through real-time battery internal resistance measurement. Final result As a result of simulation of the internal resistance measurement test circuit through external impedance (AC), the actual simulation value was 0.05Ω, RS = Vrms / Irms => Vrms = 8.0036mV, Irms = 162.83Ma. Substitute the suggested method. The result was calculated as Rs = 0.0495Ω. It is possible to measure up to 64 impedances inside the aging diagnostic equipment that enables real-time monitoring of the developed battery cells, and the range can be changed according to the application method.

• ETRI Journal
• /
• 제33권2호
• /
• pp.230-239
• /
• 2011

Dynamic memory allocators for real-time embedded systems need to fulfill three fundamental requirements: bounded worst-case execution time, fast average execution time, and minimal fragmentation. Since embedded systems generally run continuously during their whole lifetime, fragmentation is one of the most important factors in designing the memory allocator. This paper focuses on minimizing fragmentation while other requirements are still satisfied. To minimize fragmentation, a part of a memory region is segregated by the proposed budgeting method that exploits the memory profile of the given application. The budgeting method can be applied for any existing memory allocators. Experimental results show that the memory efficiency of allocators can be improved by up to 18.85% by using the budgeting method. Its worst-case execution time is analyzed to be bounded.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1648-1664
• /
• 2000

This paper proposes a real-time dynamic storage allocation algorithm QSHF(quick-segregated-half-fit) that provides various memory allocation policies. that manages a free block list per each word size for memory requests of small size good(segregated)-fit policy that manages a free list per proper range size for medium size requests and half-fit policy that manages a free list per proper range size for medium size requests and half-fit policy that manages a free list per each power of 2 size for large size requests. The proposed algorithm has the time complexit O(1) and makes us able to easily estimate the worst case execution time(WCET). This paper also suggests two algorithm that finds the proper free list for the requested memory size in predictable time and if the found list is empty then finds next available non-empty free list in fixed time. In order to confirm efficiency of the proposed algorithm we simulated the memory utilization of each memory allocation policy. The simulation result showed that each policy guarantees the constant WCET regardless of memory size but they have trade-off between memory utilization and list management overhead.

• 한국통신학회논문지
• /
• 제22권11호
• /
• pp.2521-2530
• /
• 1997

In this paepr, we present a video-on-demand (VOD) system design model that address and integrates a number of inter-related issues. Then with analysis and performance evaluation, we investigate various aspects of disk and buffer managements in the given model. Based on the analysis results, we suggest that a distributed buffering scheme with intermediate buffers may te useful to transform bursty disk accesses into a continuous stream for for glitch-free performance of VOD systems. Also, through simulation, we illustrate that massive multimedia information storage design techniques such as prefetching, clustered striping, and real-time disk scheduling integrated with the distributed buffering mechanism may enhance end-to-end real-time performance of VOD systems under wide-area networks.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권11호
• /
• pp.581-588
• /
• 2004

Power qualify monitoring system is devoted to more concern than before, because the innovation of industrial technology needs more accurate instruments and more advanced power quality. This paper was studied on using data of the protective relay by Power Quality Monitor. This paper was proposed the wave storage condition and monitoring clauses of the protective relay as a power quality monitoring device. The protective relay will have problem to save data for PQM analysis because the protective relay memory is limited. Therefore this paper was proposed new a data compression of data got from the protective relay. This method is wave compression comparison algorithm using the DFT. The compression rate is higher than any other established method. This method can be real time storage. This algorithm is verified using the comparison among other compression rate and proved by Real Time Digital Simulator (RTDS).

• 전기학회논문지
• /
• 제63권6호
• /
• pp.727-737
• /
• 2014

This paper presents the design of Fuzzy PI controller that is used at BESS(Battery Energy Storage System) charging and discharging process for islanded operation in microgrid. Most of the PI controllers have fixed PI gains, but real-time updated gains are applied to PI controller using Fuzzy logic in this paper. The performances of suggested Fuzzy PI controller are simulated by PSCAD/EMTDC. As a result, output characteristics of ESS applied real-time updated gains to PI controller are faster than those of using fixed gains.

• 산업공학
• /
• 제8권1호
• /
• pp.45-52
• /
• 1995

Automated Storage and Retrieval System (AS/RS), which is an element of Computer Integrated Manufacturing (CIM), is a widely used material handling equipment with conveyors and Automatic Guided Vehicles (AGVs). Until now the evaluation of operational policies of AS/RS and control algorithms is done theoretically or by computer simulations. In this study, a real-time control and communication software for an AS/RS is developed for actually moving AS/RS miniature. A PC-based real-time operational program can control the AS/RS directly through the communication port. The operational system has additional functions such as storage/retrieval management, inventory management, statistics management, and protocol simulation. The communication protocol simulator of S/R machine can be used for the controller of an S/R machine.

• Journal of applied mathematics & informatics
• /
• 제39권5_6호
• /
• pp.805-811
• /
• 2021

Currently, batteries use commonly as energy sources for mobile electric devices. Due to the high density of energy, the energy storage state of a battery is very important information. To know the battery's energy storage state, it is necessary to find out the open state voltage of the battery. The open state voltage calculates with a mathematical model, but the computation of the real time state is complicated and requires many calculations. Therefore, the state observer designs to estimate in real time the battery open-circuit voltage as disturbance including model error. Using the estimated open voltage and applying it to the state estimation algorithm, we can estimate the charge. In this study, we first estimate the open-circuit voltage and design an estimation algorithm for estimating the state of battery charge. This includes errors in the system model and has a robust characteristic to noise. It is possible to increase the precision of the charge state estimation.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1753-1765
• /
• 2000

As the areas of computer application are expanded, real-time application environments that must process as many transactions as possible within their deadlines, such as a stock transaction systems, ATM switching systems etc, have been increased recently. The reason why the conventional database systems can't process soft real-time applications is the lack of prediction and poor performance on processing transaction's deadline. If transactions want to access data stored at the secondary storage, they can not satisfy requirements of real-time applications because of the disk delay time. This paper designs a main-memory database prototype systems to be suitable to real-time applications and then this system can produce rapid results without disk i/o as all of the information are loaded in main memory database. In thesis proposed the improved techniques with respect to logging, checkpointing, and recovering in our environment. In order to improve the performance of the system, a) the frequency of log analysis and redo processing is reduced by the proposed redo technique at system failure, b) database consistency is maintained by improved fuzzy checkpointing. The performance model is proposed which consists of two parts. The first part evaluates log processing time for recovery and compares with other research activities. The second part examines checkpointing behavior.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.96-101
• /
• 2010

Superconducting Magnetic Energy Storage (SMES) system is one of the key technologies to overcome the voltage sag, swell, interruption and frequency fluctuation by fast response speed of current charge and discharge. In order to evaluate the characteristics of over mega joule class grid connected High Temperature Superconducting (HTS) SMES system, the authors proposed an algorithm by which the SMES coil could be connected to the Real Time Digital Simulator (RTDS). Using the proposed algorithm, users can perform the simulation of voltage sag and frequency stabilization with a real SMES coil in real time and easily change the capacity of SMES system as much as they need. To demonstrate the algorithm, real charge and discharge circuit and active load were manufactured and experimented. The results show that the current from real system was well amplified and applied to the current source of simulation circuit in real time.