DOI QR코드

DOI QR Code

Development of Aging Diagnosis Device Through Real-time Battery Internal Resistance Measurement

  • Kim, Sang-Bum (Department of Electronic Engineering, Honam University) ;
  • Lee, Sang-Hyun (Department of Electronic Engineering, Honam University)
  • Received : 2022.03.23
  • Accepted : 2022.04.02
  • Published : 2022.05.31

Abstract

Currently, the rapid growth of electric vehicles and the collection and disposal of waste batteries are becoming a social problem. The purpose of this paper is to propose a fast and efficient battery screening method through a safe inspection and storage method according to the collection and storage of waste batteries of electric vehicles. In addition, as the resistance inside the waste battery increases, an instantaneous voltage drop occurs, and there is a risk of overcharging and overdischarging compared to the initial state of the battery. Accordingly, there are great difficulties in operation, so the final goal of this study is to develop a device for diagnosing aging through real-time battery internal resistance measurement. Final result As a result of simulation of the internal resistance measurement test circuit through external impedance (AC), the actual simulation value was 0.05Ω, RS = Vrms / Irms => Vrms = 8.0036mV, Irms = 162.83Ma. Substitute the suggested method. The result was calculated as Rs = 0.0495Ω. It is possible to measure up to 64 impedances inside the aging diagnostic equipment that enables real-time monitoring of the developed battery cells, and the range can be changed according to the application method.

Keywords

References

  1. T. -H. Chen, T. -Y. Hsieh, N. -C. Yang, J. -S. Yang and C. -J. Liao, "Evaluation of advantages of an energy storage system using recycled EV batteries," International Journal of an energy storage systems, Vol. 45, Issue. 1, pp. 264-270, 2013, February. DOI: https://doi.org/10.1016/j.ijepes.2012.08.037
  2. J. H. Park, G. W. Kim, J. H. Kim, "A Study on Estimation Algorithm of Maximum Charge/Discharge Power Based on High-accuracy SOC/Capacity Estimation through DEKF," Proceedings of the KIPE Conference, pp. 204-206, 2019, July 02.
  3. S. B. Kim and S. H. Lee, "Design and development of less than 1Kw Lithium rechargeable battery pack," The International Journal of Internet, Broadcasting and Communication, Vol. 10, No. 3, pp. 104-108, 2018. DOI: https://doi.org/10.7236/IJIBC.2018.10.3.104
  4. B. Ning, B. Cao, B. Wangm, Z. Zou, "Adaptive sliding mode observers for lithium-ion battery state estimation based on parameters identified online," Energy, vol. 153, pp. 732 -742, 2018. DOI: https://doi.org/10.1016/j.energy.2018.04.026
  5. D.-H. Shin, et al., "Modeling of Lithium Battery Cells for Plug-In Hybrid Vehicles", JPE, Vol. 13, No. 3, pp.429-436, 2013.May DOI: https://doi.org/10.1016/j.energy.2018.04.026
  6. S. B. Kim and S. H. Lee, "Battery Balancing Algorithm for an Agricultural Drone Using a State-of-Charge-Based Fuzzy Controller," Applied sciences, Vol. 10, No. 15, special issue 5277, 2020. DOI: https://doi.org/10.3390/app10155277