• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7A
• /
• pp.654-661
• /
• 2011

RTLS (Real-time locating systems) are used for tracking the location of people or assets in real time. In this system, RTLS readers continuously communicate with RTLS tags for measuring time or ranges and location engine tries to calculate accurate location of tags. However, when we attempt to apply this system to real world, the non-line-of-sight(NLOS) problem can be critical to the system performance because of the obstacles. In this paper, we suggest a new location estimation method for an NLOS environment using a reader-selection strategy. We have implemented all components of the locating system and carried out experiments in a test-bed. The accuracy of the system is 50% better than that of the existing general locating system.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.210-213
• /
• 2017

The construction industry has witnessed an exponential growth of drones used in the field over the past few years. Likewise, the field of maintenance has paid increasing attention to using drones with a view to improving the efficiency of condition checks in high-rise buildings and major space. Although operators manipulate drones to inspect buildings at present, drones are expected to autonomously move around without operators in a few years. Also, for indoor maintenance, it is important for drones to find accurate locations, which is implemented by real-time locating systems(RTLS). Yet, the accuracy of RTLS varies across the types of systems and indoor settings, which warrants a locating system suitable for indoor space and a location correction system designed to improve the accuracy. Hence, the current study investigated the accuracy of real-time locating systems(RTLS) for the maintenance of indoor space of buildings with drones and delved into the methods of correcting the location information to improve the accuracy of RTLS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1013-1020
• /
• 2013

In this paper the super-resolution time delay estimation algorithms based on eigen-analysis are developed for spread spectrum signals along with their comparative performance analysis. First, we shall develop super-resolution time delay estimation algorithms using the representative eigen-analysis based AOA (angle-of-arrival) estimation algorithms such as MUSIC, Minimum-Norm, and ESPRIT, and apply them to the ISO/IEC 24730-2.1 real-time locating system (RTLS) employing a direct sequence spread spectrum (DS-SS) technique to compare their performances in RTLS environments. Simulation results illustrate that all the three algorithms can resolve multipath signals whose delay differences are even smaller than the Rayleigh resolution limit. Simulation results also show that MUSIC and Minimum-Norm provide a similar performance while ESPRIT is inferior to both algorithms in RTLS environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.310-317
• /
• 2013

In this paper an ESPRIT-based super-resolution time delay estimation algorithm is developed for real-time locating system (RTLS) and its performance is analyzed in various multipath environments. The performance of the existing correlation method for time delay estimation seriously degrades in multipath environments where the relative time delays of multipath signals are less than a PN chip. To solve the problem we shall develop a frequency domain super-resolution time delay estimation algorithm using the ESPRIT, the most representative super-resolution direction-of-arrival (DOA) estimation algorithm, and analyze its performance in various multipath environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1238-1245
• /
• 2006

Interest to the RTLS that is one of RFID applications is increasing in recent. The RTLS(Real Time Locating Systems) is one of applications for locating and tracking using RFID tags which are attached to something like container, pallet, or all the things. This paper presents the design and the implementation of an RTLS system using 433MHz active RFID tags and use radio frequency to provide the scalability. Our system we developed using RFID platform takes into account an RTLS standard. Also, in this paper a routing protocol is included to data delivery to server via each reader. In order to perform the evaluation, in addition, some experiments in out door are performed and results such as error metric and distance are also included. Furthermore, simulation for the routing protocol we supposed is also included.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.4
• /
• pp.239-246
• /
• 2017

Time synchronization between distributed embedded systems in the Real Time Locating System (RTLS) based on Time Difference of Arrival (TDOA) is one of the most important factors to consider in system design. Clock jitter error between each system causes many difficulties in maintaining such a time synchronization. In this paper, we implemented a system to synchronize clocks between FPGA based distributed embedded systems using the recovery clock of CDR (clock data recovery) used in high speed serial communication to solve the clock jitter error problem. It is experimentally confirmed that the cumulative time error that occurs when the synchronization is not performed through the synchronization logic using the CDR recovery clock can be completely eliminated.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.201-207
• /
• 2013

The chirp signaling has been mainly used in radar systems due to its good correlation characteristics, and nowadays it is applied to real time locating system(RTLS). The RTLS with chirp signaling was chosen as a standard such as ISO/IEC 24730-5 and IEEE 802.15.4a. In this paper, the performance of a real time locating system with chirp signaling was evaluated and simulated with relative distance error rates. We considered three cases of S/I = -30[dB], -20[dB], and -10[dB] with Rician factor K=10 and K=20. The performance was enhanced with K factor improvement by 25%, 27% and 50% for respective three cases of S/I. As results, in case of S/I < -20[dB], the minimum signal power is required for performance improvement even though the line of sight component is helpful. And also, in case of S/I ${\geq}$ -20[dB], as the line of sight component is stronger the better performance is obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.287-295
• /
• 2010

RTLS used to track the location of object or person in real time. However, if there are a lot of tags and readers, the conventional single RTLS server may fail to estimate location of tags. And if the server cannot receive the tags signal due to pass-loss or NLOS from more than three readers, the server fail to estimate location of tags. In this paper, we propose a special reader which embeds RTLS location engine for distributed RTLS. And by using multi-directional antenna, alleviating multi-path effect and allowing estimate tag's location only using two readers. We also implement the system, we can reduce server packet 16times and get the all results of location estimate in single second. We achieved the location error within 1m.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.119-127
• /
• 2012

In this paper a super-resolution time delay estimation algorithm is developed for real-time locating systems (RTLSs) that employ a direct-sequence spread spectrum technique, along with its performance analysis in multipath environments. The classical correlation method provides relatively good performance in line-of-sight (LOS) environments but its performance seriously degrades in multipath environments, especially when signals are spaced closer than a PN chip. Therefore we shall develop a super-resolution time delay estimation algorithm that may estimate the time delays of multipath signals even in closely spaced multipath environments using the MUSIC algorithm for direction-of-arrival estimation and analyze its performance by applying the algorithm to the ISO/IEC 24730-2.1 RTLS system. 

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.106-115
• /
• 2010

Recently, as the size of construction projects are getting bigger and higher, more effective managing methods are required in management areas such as duration reduction, cost reduction and quality management. In the current construction industry, conjunction with IT(Information Technology) is being noticed as a solution to support these needs. Various IT solutions such as Bar Code, Personal digital assistant(PDA), global positioning system(GPS), radio frequency identification(RFID) are being developed. In this research, among the various IT solutions, the Real Time Locating System(RTLS) which is acknowledged as a technology with high applicational potential is analyzed. Based on this analysis, a locating system to apply in construction sites is developed and validated. The locating system is developed to prevent construction disasters through real-time management of workers and equipment, which enables effective application in the area of construction safety management. Moreover, applications of the locating system in many different areas like construction material realtime monitoring, construction automation, construction quality management, maintenance management are expected.