• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.276-279
• /
• 2005

FRP Composite materials are widely applicable in the construction industries as a load-bearing structural element or a reinforcing and/or repairing materials for the concrete. In this paper, we presented the flexural behavior of FRP Re-bar and steel reinforced concrete beams and only FRP re-bars reinforced concrete beams. FRP Re-bar manufactured by different fibers but the same vinylester resin. Also, surface of FRP Re-bars is coated garnet and glass fiber by epoxy to increase the adhesive to concrete. Experimental investigation pertaining to the load-deflection and load-strain characteristics of two classfied specimens is presented and the theoretical prediction is also conducted. In the investigation, the effects of FRP Re-bar reinforcement are estimated. The experimental results arc compared with theoretical predictions. Good agreements arc observed.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.41-51
• /
• 2004

FRP re-bar in concrete structures could be used as a substitute of steel re-bars for that cases in which aggressive environment produce high steel corrosion, or lightweight is an important design factor, or transportation cost increase significantly with the weight of the materials. But FRP fibers have only linearly elastic stress-strain behavior; whereas, steel re-bar has linear elastic behavior up to the yield point followed by large plastic deformation and strain hardening. Thus, the current FRP re-bars are not suitable concrete reinforcement where a large amount of plastic deformation prior to collapse is required. The main objectives of this study in to evaluate the tensile behavior and the fracture mode of hybrid FRP re-bar. Fracture mode of hybrid FRP re-bar is unique. The only feature common to the failure of the hybrid FRP re-bars and the composite is the random fiber fracture and multilevel fracture of sleeve fibers, and the resin laceration behavior in both the sleeve and the core areas. Also, the result of the tensile and interlaminar shear stress test results of hybrid FRP re-bar can provide its excellent tensile strength-strain and interlaminar stress-strain behavior.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.811-819
• /
• 2003

철근의 부식은 철근콘크리트 구조물의 주요파괴 원인이다. 철근의 부식에 대한 문제점을 해결할 가능성이 있는 재료 중 FRP 보강근은 그 가능성이 높다. 그렇지만 FRP 보강근은 보강철근과 다른 파괴 매카니즘으로 의하여 현저하게 성능이 저하될 가능성을 가지고 있다. 이와 같은 환경에는 알칼리, 산, 염해 및 물과 수분 등이 있다. 따라서 본 연구에서는 FRP 보강근의 화학적 환경하에서의 내구성능을 평가하고자 하였으며 사용된 FRP 보강근은 2가지 종류의 CFRP 보강근 및 GFRP 보강근, 한가지 종류의 AFRP 보강근으로 알칼리용액, 산용액, 염해환경 및 중성용액에 노출시켰다. FRP 보강근의 역학적 특성 및 내구특성은 인장, 압축 및 전단시험을 통하여 평가하였으며 시험결과 FRP 보강근은 매우 혹독한 화학적 환경에서 우수한 내구성을 가지고 있음을 알 수 있었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.371-374
• /
• 2003

The corrosion of steel reinforcing bar(re-bar) has been the major cause of the reinforced concrete deterioration. FRP(Fiber-reinforced polymer) reinforcing bar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. In this study, long-term durability performance of FRP re-bar were evaluated. The mechanical and durability properties of two type of CFRP- and GFRP re-bar were investigated; the FRP re-bars were subjected to alkaline solution, acid solution, salt solution and deionized water. The mechanical and durability properties were investigated by performing tensile and short beam tests. Experimental results confirmed the desirable resistance of FRP re-bar to aggressive chemical environment.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.81-87
• /
• 2008

High-rise building is taking a place as one of building types from apartment housings to commercial buildings. With taking in account of stability and durability, strength of used materials is increasing gradually in these high-rise buildings. According to this, frequency in use of SD500 re-bar is increasing gradually in high-rise buildings. However the study of SD500 re-bar is insufficient because SD500 re-bar started to be used for domestic buildings lately. Specially because there is no guide or study to refer to, people get into difficulties when to decide the method of re-bar connection in construction using SD500 re-bar. Accordingly in this study, it suggests the method of estimating the economical efficiency on SD500 re-bar connection, and conducts benefit/ cost analysis on lapped splice and coupler splice by applying AHP theory, and then presents its result. After to analyze re-bar diameter of D25, 29, and 32, finally we attained the result that the coupler splice is advantageous in all parts of benefit/ cost more than the lapped splice.

• Composites Research
• /
• 제16권3호
• /
• pp.32-40
• /
• 2003

최근 철근의 부식과 관련된 철관콘크리트 바닥판의 내구성에 대한 문제점이 증가되면서 부식에 대한 저항성이 크며, 기존 구조용 재료에 비해 여러 가지 물리적, 역학적 장점을 가진 섬유보강플래스틱을 사용한 보강재의 사용성이 증가되고 있다. 본 연구는 GFRP Re-Bar 다발로 보강된 1방향 슬래브의 휨거동에 관한 실험적 연구로서, 국내에서 개발된 GFRP Re-bar의 인장시험을 수행하였으며, GFRP Re-Bar의 보강량을 증가시켜가며 단위 폭을 갖는 1방향 슬래브 실험체를 제작하고 3등분점 재하실험을 수행하였다. 각 실험체에 대한 이론적인 해석은 철근콘크리트 휨부재의 해석 및 설계방법을 수정, 보완하여 개발된 ACI Committee 440에 따라 수행하였으며, 실험결과와 이론적 해석결과를 비교, 분석하였다. 연구결과 ACI Committee 440에 의해 추정한 각 실험체의 하중­처짐 거동은 실험결과와 비교적 잘 일치함을 알 수 있었으며, FRP Re-Bar로 보강된 콘크리트 바닥판의 설계규준을 확립하기 위해서는 강도에 대한 한계상태뿐만 아니라 처짐 등 사용성에 대한 한계상태가 결정되어야 할 것이라 생각된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.220-221
• /
• 2022

With reent changes in energy sources, infrastructure facilities for energy charging are increasing around living areas. The infrastructure facilities have a slight possibility of explosion, and for this research on protection is needed. In this study, the performance of the reinforcement type is reviewed by examining the destructive properties after applying the impact by the high-velocity projectile to the cement composite to which various reinforcement methods are applied.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.71-76
• /
• 2008

Recently, the high-rise apartment housings have become a prototype of the urban residential dwelling in Korea and the numbers of one have steadily been increasing. According to this trend, the strength of the construction materials is also fortified to assure the stability and durability of the buildings. Specially, Re-bar of SD500 type is largely used at the construction sites of high-rise building. This study analyzes the current usage of SD500 high-strength re-bar at domestic construction sites. Through the result of this analysis, we develop Economic Evaluation Model that measure economic efficiency of lap splice and coupler splice, which are most commonly used in connection SD500. The evaluation method was applied to construction sites in Seoul in December 2006, and the result revealed that coupler splice is relatively superior in terms of cost efficiency when the re-bar diameter is longer and the concrete strength is lower.

• 대한건축학회연합논문집
• /
• 제21권3호
• /
• pp.87-92
• /
• 2019

To relieve noise between floors in Korea, recent domestic and overseas studies have been developing materials that have the properties of ceramic, which is an inorganic compound, and polymer, which is an organic compound, to introduce a new function to polymer. This study conducted a bending strength experiment between re-bar and new composite concrete mixing POSS (Polyhedral Oligomeric Silses-quioxanes) nano complex on the inside of concrete, and by assembling the inside of each concrete with 3 and 4 main re-bars as an experiment to supplement various problems that occur by the expression of this strength and the distribution of the reinforcement. The number of the main re-bars. and the direction of laying the concrete were applied as the principal variables of the experiment. Upon experiment, there were no differences in the bond strength based on the location of the main re-bar, and a 2 % increase in the bond strength was shown in the specimen laid in the same direction as the main re-bar in comparison to that of the specimen laid in a different direction from the main re-bar. The experiment results displayed that the composite concrete had uniform performance based on the rapid reaction speed of POSS nano complex.

• 콘크리트학회논문집
• /
• 제21권4호
• /
• pp.389-400
• /
• 2009

현행 기준식에 따르면 초고강도 콘크리트에서는 철근 인장이음길이보다 압축이음길이가 더 길어지는 현상 이 발생된다. 횡보강근의 영향을 반영하면 이러한 경향은 더욱 심화된다. 실제 구조물에서 반드시 존재하는 횡보강근과 철근 지름의 영향을 40, 60 MPa 콘크리트에 대한 압축이음 실험을 통해 강도와 거동 특성을 분석하였다. 지름 22, 29 mm 에 대한 실험 결과 철근 지름의 영향은 없는 것으로 나타났다. 가는 지름의 철근에서는 이음강도의 증진이 기대될 수 있으나, 압축철근에는 주로 큰 지름의 철근이 사용되므로 압축이음에서는 철근 지름의 효과를 고려할 필요가 없을 것 으로 판단된다. 횡보강근이 있는 압축이음강도는 현행 설계기준과 비교할 때 100% 이상 크므로 횡보강근을 고려한 새 로운 설계기준식의 정립이 필요하다. 지압은 이음 단부에 배근된 횡보강근에 의해서만 강도가 향상되며, 이음구간에 배 근된 횡보강근에는 무관하다. 횡보강근량이 많을수록 부착에 의해 발현되는 강도는 거의 선형적으로 증가하며, 이음단 부에만 횡보강근을 배근해도 부착강도가 6% 향상되었다. 횡보강근이 배근된 경우 부착에 의해 발현되는 강도는 인장이 음에 비해 동등하거나 더 낮아지므로, 인장이음에 비해 압축이음의 강도 증진은 단부 지압 효과로만 설명될 수 있다.