• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.71-77
• /
• 1984

A study on the stability of chlorophyll a in Undaria pinnatifida during blanching, salting and storage was carried out. Raw Undaria pinnatifida was blanched for 25 seconds in the temperature range of 70 to $100^{\circ}C$. To stabilize the chlorophyll a some chemicals such as 1% solutions of $Ca(CH_3CO_2)_2,{\;}Ca(OH)_2,{\;}MgCO_3,{\;}0.5%{\;}Ca(CH_3CO_2)_2$ with $0.5%{\;}MgCO_3$, and reed ash solution were used during/after blanching. The blanched product was salted with table salt after centrifuging for 2 minutes at 1500 rpm, and then again centrifuged after 48 hours for dewatering. The product which was mixed with 8% of table salt was sealed in a polyethylene film bag and stored at 10, 20, 30 and $40^{\circ}C$. The most effective blanching temperature for maximal residual amount of chlorophyll a was $85^{\circ}C$. The quantities of total organic and volatile acids were not significantly changed by the blanching temperature. Blanching in 1% chemical solutions showed bitter results than soaking in 1% chemical solutions for 20 minutes after blanching without chemicals. Reed ash and 0.5% $Ca(CH_3CO_2)_2$ with 0.5% $MgCO_3$ solutions were more effective than the 1% solutions of other chemicals, but the effect was not significant, compared with the group not treated with chemicals. The most reasonable ratio of added salt to dewater the product for 48 hours was 30% in w/w. The amount of total organic and volatile acids revealed no correlation with the amount of added salt. Color and odor of salted product was not severely changed during the storage of 77 days at $10^{\circ}C$. But the changes were accelerated with increasing storage temperatures. The degradation of chlorophyll a in salted product during storage could be interpreted as a first order reaction, and the rate constants at 10, 20, 30 and $40^{\circ}C$ were 0.1289, 0.1028, 0.0770 and 0.0550, respectively. $Q_{10}$ and the activation energy were 1.33 and 5.01 Kcal/g mole.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.4
• /
• pp.497-505
• /
• 2012

The nutritional, physicochemical and sensory quality characteristics of chilled loins of Jeju Black Cattle, Hanwoo and imported Australian beef were compared. For nutritional properties, moisture and crude protein contents of Jeju Black Cattle beef were 65.91% and 17.39% respectively, the lowest among the comparison groups. On the other hand, their crude fat and crude ash contents were 15.89% and 0.79%, respectively, the highest among the comparison groups. There was a significant difference in crude ash content, but there was no significant difference in the other properties. The Fe and Zn contents of Jeju Black Cattle beef were 29.85 and 48.13 ppm, respectively, lower than those of Hanwoo beef, although the difference was not significant. These values were higher than those of Australian beef (p<0.05). There was no significant difference among the samples in contents of Ca, P, Na and Cu. The total amino acid and essential amino acid contents of Jeju Black Cattle beef were 16.81% and 9.08%, respectively, the lowest among the samples, although the difference was not significant. The ratio of essential amino acids to total amino acids of Jeju Black Cattle beef was 54.01%, the highest among the samples. The saturated fatty acid (43.25%), stearic acid (13.51%), linoleic acid (2.39%) and essential fatty acid (2.47%) contents of Jeju Black Cattle beef were the lowest. However, their unsaturated fatty acid (56.69%), oleic acid (47.80%) and MUFA/SFA ratios were the highest, and there were significant differences compared with Australian beef. There was no significant difference in the PUFA/SFA ratio. Among physicochemical properties, redness ($a^*$) of Jeju Black Cattle beef was the highest while melting point was the lowest (p<0.05). There were no significant differences in lightness ($L^*$), yellowness ($b^*$), pH, water holding capacity, cooking loss or shear force value. For sensory properties, raw meat aroma, cooked meat aroma and palatability of Jeju Black Cattle beef were superior compared to other comparison groups, with significant differences in comparison with Australian beef (p<0.05). However, there were no significant differences in taste, juiciness, or tenderness of cooked meat.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.122-134
• /
• 2015

This study was conducted to investigate the potential of torrefied larch wood as a raw material of pellets. First of all, larch chip was torrefied at the temperatures of 230, 250 and $270^{\circ}C$ for 30, 50 and 70 min. Secondly, moisture content, moisture absorption, higher heating value and ash content of the torrefied chip were measured to examine the effects of torrefaction conditions on the fuel characteristics of larch. Thirdly, surfaces of the torrefied chip were observed by light microscope (LM), field emission scanning microscope (FE-SEM) and SEM-energy dispersive spectroscopy (EDXS). With the increases of torrefied temperature and time, contents of lignin increased and those of hemicellulose reduced. Moisture content of torrefied larch chip was greatly lower than that of non-torrefied chip. Moisture absorption of the torrefied chip decreased as torrefaction temperature increased. As torrefaction temperature increased, higher heating value and ash content of larch chip increased. However, durability of torrefied-larch pellets was remarkably lower comparing to non-torrefied-larch pellets. When surface of larch chip was observed by LM and FE-SEM, surface color and cell wall of the chip was getting darker and more collapsed with the increases of torrefaction conditions. Through the analysis of SEM-EDXS, distribution and quantity of lignin existing on the surface of larch chip increased with the increases of torrefied conditions. In conclusion, $270^{\circ}C$/50 min might be an optimal condition for the torrefaction of larch with the aspect of fuel characteristics, but torrefaction condition of $230^{\circ}C$/30 min should be considered according to the durability of torrefied-larch pellets.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.209-217
• /
• 2006

In this study, chemical compositions of Helice tridens tientsinensis(Htt, sea crab) and changes of chemical compositions in fermented sea crab tested according to different storage days(10, 16, 20, 25, 29, 55, 61, 67). The average amount of chemical compositions in raw Htt, it contains 77.12% of moisture, 1.96% of ash, 18.93% of crude protein, 0.26% of crude lipid. During storage time the amount of moisture and crude protein decreased, but crude lipid and ash increased. The amount of volatile basic nitrogen in Htt showed 6.56 mg/100g. The fermented sea crab in brine stored at the temperature of $5^{\circ}C$ showed 23.72 mg/100g of freshness even after 55 days. It showed first stage of decomposition(31.69 mg/100g) after 61 days. it is most efficient to store fermented sea crab at a low temperature. The amount of free amino acid composition in fresh Htt, was measured as follow ;arginine(1140.88 mg/100g), alanine(311.26 mg/100g), prorine(214.63 mg/100g), serine(113.56 mg/100g), taurine(90.80 mg/100g). The amount of amino acid in fermented sea crab increased as the storage days increased. Fatty acid contents in fresh Htt showed the largest amount of erucic acid (27.39 area%) and pentadecenoic acid (19.44 area%), oleic acid (17.68 area%), palmitic acid (11.00 area%), stearic acid (6.89 area%), and elaidic acid (6.15 area%) in order. In fermented sea crab, a small change was noticed in quantity, but the obvious increased composions were palmitoleic and heneicosanoic acid etc.

• Korean Journal of Poultry Science
• /
• v.7 no.2
• /
• pp.37-46
• /
• 1980

Hand deboned and mechanically deboned chicken meat were produced from domestic broilers and spent layers. Meat yield, chemical composition, functional characteristics, stability during storage, and microbiological properties were investigated Chicken patties and frankfurters were also manufactured by varying the relative proportion of MDCM to HDCM as raw materials, ana their palatability, shelf-life and textural properties were evaluated. The obtained results were as follows: 1) 35% of carcass wt was recovered as HDCM and 45% as MDCM, total meat yield reaching 80% of carcass wt. 2) Moisture, protein, fat, ash and Ca content of MDCM were 65, 12, 20, 1.7 and 0.2-0.4%,respectively. MDCM was higher in fat, ash and Ca, but significantly lower in moisture and protein. Total pigment content of MDCM was 2.5 times higher than that of HDCD such high content being attributed to the increased inclusion of hemoglobin. 3) The emulsifying capacity (ES) of MOCM per g meat was only 70% that of HDCM. but when ES was expressed on unit g of protein basis MDCM showed even higher ES than HDCM primarily due to tile higher proportion of salt soluble protein fraction. 4) Since the TBA values of MDCM increased rapidly after 4 weeks of frozen storage at -20$^{\circ}C$, the maximum possible storage period of MDCM is estimated to be about 4 weeks. 5) Total microbial counts of MDCM was approximately 1.8${\times}$10$\^$6/g/, showing no great difference from HDCM or red meat. 6) Chicken patty containing MDCM showed gradual increase in TBA value during frozen storage, but its storage up to 8 weeks presented no problems in flavor stability. 7) Color score an4 total palatability of chicken Patty were best for the product containing 30% MDCM. It was also concluded that MDCM can be included in the patties up to 50% of total meat with good results, but more than 70% was not recommended 8) The formulation of MDCM up to 50% in frankfurter gave quite satisfactory acceptability and textural properties comparable to frankfurter made of 100% MDCM, but the inclusion of more than 70% MDCM was not recommended 9) The TBA value of frankfurter containing MDCM did not increase to any great extent until 4 weeks of storage at 4$^{\circ}C$, indicating no unique problems in flavor instability compared to regular frankfurter. 10) It was concluded that processed meat products such as patties and frankfurters containing MDCM up to 30-50% of total meat ingredients gave satisfactory results in color, texture and palatability, comparable to regular products.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.253-261
• /
• 2014

In this study, we investigated several chemical and physical characteristics of 4 weed seed fibers; Hemistepta lyrata (HEMLY), Imperata cylindrica var. koenigii (IMPCK), Metaplexis japonica (METJA) and Typha latifolia (TYPLA). In chemical composition, there were 74 (TYPLA)-88.5% (METJA) of holocellulose, 17 (IMPCK)-24% (METJA) of lignin, 0.22 (METJA)-4.2% (IMPCK) of ash, 2.2 (HEMLY)-7.8% (IMPCK) of hot water extractives and 0.4 (IMPCK)-6.3% (TYPLA) of solvent extractives. Alpha-cellulose proportion to holocellulose was similar among weed seed fibers as 45-48%. The crystallinity index (CI) of raw seed fibers was 53.2 (TYPLA)-65.9% (HEMLY). However, CI of the chemical treated fibers (EDA fibers) was a little increased and showed 61.1 (IMPCK)-71.8% (METJA). The maximum thermal decomposition temperature (MTDT) of the raw seed fibers were 312, 321.8, 331.5 and $341.6^{\circ}C$ in METJA, TYPLA, HEMLY and IMPCK, respectively. But the MTDT of the EDA fibers were 327, 327, 341.7 and $360.0^{\circ}C$ in HEMLY, TYPLA, METJA and IMPCK, respectively. Taken together, they showed a similar or better characteristics compared to the reported or commercial natural fiber resourses. Accordingly, they seem to be practically applicable as renewable resources for a new natural fibers.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.599-612
• /
• 2017

Human hair (HH) is produced as a waste from beauty parlor and barbershop. HH-based adhesives were formulated with NaOH-hydrolyzed HH, $H_2SO_4$-hydrolyzed chicken blood (CB) and PF as a crosslinking agent. Physicochemical properties and retention rate against hot water of the adhesives were measured to investigate the potential of HH as a raw material of wood adhesives. HH was composed of keratin-type protein of 80% and over. Ash of less than 0.1% was contained in HH. Among the amino acids included in HH, glutamic acid showed the highest content, followed by cysteine, serine, arginine and threonine. Solid content of the adhesives ranged from 33.2% to 41.8% depending on hydrolysis conditions of HH and PF type. Viscosity at $25^{\circ}C$ ranged from 300 to $600mPa{\cdot}s$ resulting in a sprayable adhesive. Retention rate against hot water measured to evaluate the water resistance of adhesives was the highest in the cured resin formulated with 5% NaOH-hydrolyzed HH and 5% $H_2SO_4$-hydrolyzed CB. Meanwhile, the molar ratio of formaldehyde to phenol in PF did not have a significant impact on the retention rate of HH-based adhesives. When the retention rates of HH-based adhesives were compared to those of conventional wood adhesive resins used for the production of wood-based panels extensively, HH-based adhesives formulated with 30 wt% PF showed lower retention rate than commercial urea-formaldehyde resin. However, when PF content was increased to 35 wt%, the retention rate greatly increased and approached to that of commercial melamine-urea-formaldehyde resin. Except for the results mentioned above, the analysis of economic feasibility suggests that HH-based adhesives can be used for the production of wood-based panels if HH is hydrolyzed in proper conditions and then the HH-based adhesives are formulated by the HH hydrolyzates with 35 wt% PF.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2007

The purpose of this study was to investigate quality characteristics of the meat batter containing dietary fiber extracted rice bran. The formulations of meat batters were manufactured in a model system with 2% raw rice bran and 2, 4, 6% levels of dietary fiber extracted rice bran, respectively. The proximate compositions of dietary fiber extracted rice bran were 53.27% dietary fiber, 6.10% crude fat, 22.99% crude protein, 12.78% crude moisture, and 7.41% crude ash. Compared with control of uncooked meat batter, the pH value of all treatments were significantly different(p<0.05). The pH of cooked meat batter were similar to uncooked meat batter. $CIE\;L^*-\;and\;CIE\;b^*-value$ of uncooked meat batter containing dietary fiber extracted rice bran were lower than control, but CIE $a^*-value$ of treatment was higher than those in control(p<0.05). All treatments had significantly lower cooking loss and emulsion stability than control(p<0.05). Compared with control, viscosity of the treatments containing dietary fiber extracted rice bran were observed significantly higher than those in control (p<0.05). And then hardness, cohesiveness, gumminess, and chewiness of treatments were higher than in control(p<0.05). Conclusively, the results of this study showed that addition of dietary fiber extracted rice bran affected the high quality properties of meat batter.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.915-919
• /
• 2015

This study was performed in order to provide basic data for predicting the usefulness of Jicama (Pachyrhizus erosus) as a food raw material. The changes in the physicochemical properties of freeze-dried and hot air-dried Jicama were investigated and analyzed. The moisture content of raw Jicama was 81.84%. The crude protein, crude fat, crude ash and carbohydrate content of hot air-dried Jicama powder were 2.85, 0.79, 7.93 and 88.44%, while those of freeze-dried Jicama powder were 3.93, 0.83, 7.92 and 87.32%, respectively on dry basis. Regarding the color values, the lightness of freeze-dried Jicama (92.86) was higher than that of the hot air-dried Jicama (88.01), whereas the redness (-0.67) and yellowness (3.21) of freeze-dried Jicama were lower than those of the hot air-dried Jicama (0.43) and (11.96), respectively. The brown index was lower in the freeze-dried Jicama (0.029) than in hot air-dried Jicama (0.107). The total sugar content showed no significant differences between freeze (46.49 mg/g) and hot air-dried Jicama (45.11 mg/g). Finally, the amylose content was higher in freeze-dried Jicama (5.66%) than in hot air-dried Jicama (6.63%).

• Journal of Life Science
• /
• v.17 no.7 s.87
• /
• pp.964-969
• /
• 2007

This study was carried out to investigate the effects of addition of pork fat, olive oil and soybean oil on the quality and sensory of ground pork meat. The samples consisted of the ground pork meat containing 20% pork fat (GP-P), 20% olive oil (GP-O), and 20% soybean oil (GP-S). The chemical composition, surface color, fatty acid composition, water hold-ing capacity, pH, VBN content and TBARS value were determined for the ground pork meat as the quality characteristics, and the sensory score were also evaluated. The moisture, crude protein, crude fat and crude ash content were not different among the GP-P, GP-O and GP-S. The $L^{*}$(lighaess), $a^{*}$(redness) and $b^{*}$(yellowness) of /GP-P were higher than those of the GP-O and GP-S (p<0.05). Palmitic acid was the most abundant among saturated fatty acids, and palmitic acid content of GP-P (24.384%)was higher than that of the GP-O (15.611%) and GP-5 (14.423%). In case of unsaturated fatty acids, oleic acid of GP-P (43.773%) and GP-O (65.040%) were the highest, linoleic. acid for GP-5 (40.762) was the highest. The water holding capacity of GP-P was higher than that of the GP-0 and GP-5, the pH of GP-S was higher than that of the GP-P and GP-O, and the VBN content and TBARS value of GP-P was higher than that of the GP-O and GP-5 (p<0.05). The raw color of GP-0 and GP-S were higher than that of the GP-P (p<0.05), however the raw aroma was not different among the samples. In case of roasted ground pork meat, the aroma was not different among the samples, the taste, texture and palatability or GP-S were the highest among the samples, and the juiciness of GP-O and GP-S were higher than that of the GP-P(p<0.05).