• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1854-1862
• /
• 2024

This study aims to investigate the strain-dependent-deformation property of Gyeongju bentonite buffer material. A series of unconfined compressive tests were performed with cylindrical specimens prepared at varying dry densities (𝜌_d = 1.58 g/cm³ to 1.74 g/cm³) using cold isostatic pressing technique. It is found that as 𝜌_d increase, the unconfined compressive strength (q_u), failure strain, and elastic modulus (E) of Gyeongju compacted bentonite (GCB) increases. Normalized elastic modulus (E_sec/E_max) degradation curves of GCB specimens are fitted using Ramberg-Osgood model and the elastic threshold strain (𝜀_e,th) is determined through the fitted curves. The strain-dependency of E and Poisson's ratio (v) of GCB were observed. E and v were measured constant below 𝜀_e,th of 0.14 %. Then, E decreases while v increases after exceeding the strain threshold. The E_sec/E_max degradation curves of GCB in this study suggests wider linear range and higher linearity than those of sedimentary clay in previous study. On top of that, the influence of 𝜌_d is observed on E_sec/E_max degradation curves of GCB, showing a slight increase in 𝜀_e,th with increase in 𝜌_d. Furthermore, an empirical model of q_u with 𝜌_d and a correlation model between q_u and E are proposed for Gyeongju bentonite buffer materials.

• Structural Engineering and Mechanics
• /
• v.91 no.6
• /
• pp.539-549
• /
• 2024

In this paper, thermal buckling analysis was conducted using trigonometric shear deformation theory, which employs only four unknowns instead of five. This present theory is variationally consistent, and accounts for a trigonometric variation of the transverse shear strains across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The grading is provided along the thickness of the plate as per power law volume fraction variation of metal-matrix ceramic reinforced composite. The non-linear governing equation problem was solved for simply supported boundary conditions. Three types of thermal loads are assumed in this work: uniform, linear and non-linear distribution through-the-thickness. It is well known that material properties change with temperature variations and so the analysis was performed for both the cases: temperature-dependent (TD) and temperature-independent (TID) material properties. The impact on thermal buckling for both linear and non-linear temperature variation was considered. The results were validated for the TID case with other theories and were found to be in good agreement. Furthermore, a comprehensive analysis was performed to study the impact of grading indices and geometrical parameters, such as aspect ratio (a/b) and side-to-thickness ratio (a/h), on the thermal buckling of the FG plate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.767-772
• /
• 2003

The clay which transported into a pond under the high water content condition have no effective stress which develop from the starting point of sedimentation and self-weight consolidation. Since sedimentation and self-weight consolidation dependent on self-weight of solids is made progress over a long time, to accelerating it have many advantages in the economic view In this paper, sand spreading method which is one of sedimentation and self-weight consolidation acceleration method is studied through a series of experiments considering the mixing ratio of sand and clay. The test results show that the mixing ratio of clay and sand of 1:0.2 is the biggest rate of consolidation and the pouring at the end point of sedimentation considerably effects on consolidation rate.

• Journal of Digital Convergence
• /
• v.10 no.2
• /
• pp.73-82
• /
• 2012

The purpose of this study is to verify the effects of financial structure on management performance for financial consulting through 562 small and medium sized enterprises in GyeongIn area. Meanwhile, the independent variables are non current assets ratio, total assets turnover ratio and debt ratio, the dependent variables are operating profit on sale and net profit on equity. Generally speaking, the financial structure have a positive effects on management performance.

• The Korean Journal of Health Service Management
• /
• v.11 no.3
• /
• pp.1-11
• /
• 2017

Objectives : The purpose of this study was to analyze factors affecting the performance of public hospitals in South Korea. Methods : We collected management performance data from 2013 to 2015 from income statements, balance sheets, and annual reports from 32 local public hospitals. The dependent variable used was profitability, which included operating margin, return on assets and net profit to gross revenues. The independent variables were general characteristics, liquidity, stability, and activity. Results : Patient revenues, total assets, and total capital had increased steadily but patient expenses had increased to a greater extent. Operating profit, and net profit were consistently in deficits and the management status of local public hospitals had recently been in difficulty. The debt ratio, quick ratio, ratio of fixed liability and fixed assets turnover rate have a significant positive(+) effect on performance in the years 2013-2015. Conclusions : We suggest management strategies for these hospitals based on the results analyzed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.511-517
• /
• 2001

We evaluated the electrical properties of 37 multifilamentary jointed tapes processed by superconducting joint. In the superconducting joining method, a lap-joint was used. Tapes were selectively etched, and exposed superconducting cores of the two tapes were brought into contact with each other and then only the joined region was uniaxially pressed in the range of 1,000 to 2,50 MPa. The critical current ratio(CCR) and n-value of the jointed tape were evaluated as a function of uniaxial pressure and number of step in the contacting region. It was observed that the CCR was dependent on the number of step, but almost independent of uniaxial pressure. The highest critical current ratio and n-value were obtained to be 58% and 26%, respectively, for the jointed tape to the tape itself.

• Journal of the Korean Ceramic Society
• /
• v.43 no.7 s.290
• /
• pp.415-420
• /
• 2006

The residual stresses in the interface region of the Thermal Barrier Coating (TBC)/Thermally Grown Oxide (TGO)/Bond Coat (BC) were calculated on the TBC-coated superalloy samples using a Finite Element Method (FEM). It was found that the stress distribution of the interface boundary was dependent upon mainly the geometrical shape or its aspect ratio and the thickness of TGO layer, which was formed by growth and swelling behavior of oxide layer. Maximum compressive residual stress in the TBC/TGO interface is higher than that of the TGO/bond coat interface, and the tensile stress had nothing to do with change of an aspect ratio. The compressive residual stresses in the TBC/TGO and TGO/bond coat interface region increased gradually with the TGO growth.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.201-207
• /
• 2002

In this paper, Jeffrey's and reference priors are derived when the parameter of interest is the ratio of means of two in dependent Poisson distribution. To achieve the parameter orthogonality in the sense of Cox and Reid (1987), non-trivial orthogonal transformation is provided. The orthogonal transformation makes to find noninformative priors easy. Our simulation study indicates that the reference prior meet very well the target coverage probabilities in a frequentist sense. Using the real data, we compute Bayes estimator and MLE for the ratio of means based on the reference prior.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.302-305
• /
• 2005

In this study, settlement characteristics of 38 CFRD was investigated from monitoring data and the method to estimate the dam settlements considering valley shape during constructions was proposed. The construction modulus of dam was found to be dependent on void ratios and valley shape factor. The construction modulus varied with valley shape and decreased with increasing void ratio. Also, the modulus was increased when the shape coefficient was less than 4. The settlement investigation results showed that the total settlement was proportional to the value of the settlement coefficient multiplied by the shape coefficient divided by void ratio.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.27-34
• /
• 2009

PET fabric was dyed in black shade with disperse dyes of three primary color. The effect of combination ratio of dye concentration and energy type of disperse dye on dyeing and color property of black dyed PET fabric was investigated. Dyeing compatibility of disperse dyes of three primary color on PET was evaluated by comparison of dyeing rates of them. From the results, color property was dependent upon the combination ratio of dye concentration. In order to obtain low lightness ($L^*$) and black color, blue dye should be added enough. S-type disperse dye and $130^{\circ}C$ dyeing was suitable rather than SE-type dyes or $120^{\circ}C$ dyeing. Disperse dyes of three primary color used showed good dyeing compatibility at high dye concentration. Washfastness was fair to moderate and lightfastness was moderate.