• Journal of the Korean Data and Information Science Society
• /
• 제23권1호
• /
• pp.219-225
• /
• 2012

We derive approximate maximum likelihood estimators of two parameters in a weighted exponential distribution, and derive the density function for the ratio Y=(X+Y) of two independent weighted exponential random variables X and Y, and then observe the skewness of the ratio density.

• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.3-12
• /
• 2011

철근콘크리트 깊은 보의 거동은 전단경간비, 휨철근비, 하중점과 지지점의 조건, 그리고 사용재료의 성질 등의 여러 변수간의 복합적인 역학관계로 인해 매우 복잡하다. 이 논문에서는 이러한 깊은 보의 거동 특성을 모두 반영하여 연속지지 철근콘크리트 깊은 보의 설계를 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현 스트럿-타이 모델 설계기준을 부정정 스트럿-타이 모델을 이용한 연속지지 철근콘크리트 깊은 보의 설계에 합리적으로 적용하기 위해 외부하중에 대한 단부 지지점 반력의 비인 반력분배율과 수직 트러스 메커니즘에 의해 전달되는 외부하중의 크기 즉 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 하중분배율의 결정 시 연속지지 철근콘크리트 깊은 보의 전단에 대한 연성파괴거동을 확보하기 위하여 깊은 보의 전단저항 메커니즘을 구성하는 콘크리트 스트럿과 수직철근타이가 동시에 파괴된다는 전단평형철근비 개념을 도입하였으며, 다양한 수치해석 결과를 바탕으로 연속지지 깊은 보의 강도 및 거동에 영향을 미치는 전단경간비, 휨철근비, 그리고 콘크리트의 압축강도 등의 주요설계변수를 고려하였다. 이 논문의 후속편에서는 기존의 여러 설계방법들과 이 연구에서 제안한 방법을 이용하여 파괴실험이 수행된 다양한 종류의 연속지지 깊은 보의 강도를 평가하고, 이 연구에서 제안한 방법의 적합성을 검증하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.1171-1177
• /
• 2007

We consider estimation of the right-tail probability in a log-Laplace random variable, As we derive the density of ratio of two independent log-Laplace random variables, the k-th moment of the ratio is represented by a special mathematical function. and hence variance of the ratio can be represented by a psi-function.

• 설비공학논문집
• /
• 제14권9호
• /
• pp.741-748
• /
• 2002

The present study investigated the two-phase flow characteristics of refrigerant R-22 in T-branch with horizontal and vertical inlet tube The key experimental parameters were the orientation of inlet and branch tubes (horizontal and vertical), diameter ratio of branch tube to inlet tube (1 and 0.61), inlet mass flux (200~500 kg/$m^2$s) and inlet quality (0.1~0.4). Predicted pressure profile agreed with the measured data within 25.4%. The flow distribution ratio decreased as the mass flux increased. The flow distribution ratio decreased by 12~25% as the tube diameter ratio decreased from 1 to 0.61, and decreased by 38~47% as the orientation of branch changed from horizontal to vertical upward for horizontal inlet tubes. As the orientation of inlet tube changed from horizontal to vertical upward for horizontal branch, the flow distribution ratio increased by 15~68%, but the quality in the branch tube decreased by 28~92% due to phase separation.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.27-33
• /
• 2001

In this study, it is observed that the distribution of combustion chamber volume affects the volumetric efficiency. The distribution ratio was adjusted by controlling combustion chamber volume of head and piston bowl one. Four cases were investigated, which are the combination of different distribution ratios and different compression ratios (9.8-10.0). A commercial SOHC 3-valve engine was modified by cutting the bottom face of the head and/or replacing the piston by the one that has different volume. The result shows that the less the head side volume, the more volumetric efficiency is achieved under the same compression ratio. It is also observed that increasing volumetric efficiency results in early knock occurrence due to increased "real" compression ratio. To consider reliability in estimating the volumetric efficiency, we examined the sensitivity of the AFR equation to possible errors in emission measurements. It is shown that the volumetric efficiency, which is calculated by measuring AFR and fuel consumption, can be controlled in 1% error. 1% error.

• 한국지반공학회지:지반
• /
• 제4권3호
• /
• pp.5-18
• /
• 1988

3종의 입상체시료를 대상으로 공극비의 빈도분포, 상대밀도 전단강도 등에 대한 시험연구결과 (1) 유리알의 경우 공극비의 빈도분포는 Shahinpoorl가 제안한 음의 지수분포에 접근하며 입자의 모양은 구형에서 각형의 순으로 변화되는 반면에 조밀한 공극의 빈도는 감소하며 Beta분포로서 잘 나타냈다. (2) 전 시료에서 공극비의 표준편차는 시료의 상대밀도와 입자의 구형성이 감소함에 따라 증가하였다. (3) 전단강도는 평균공극비와 표준편차의 함수일 뿐만 아니라 공극비 분포의 확율밀도함수이다. (4) 공극비는 정도분포가 조밀한 공극쪽으로 기울수록 시료의 전단강도는 더 크며 이의 역도 또한 같다.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.725-734
• /
• 1997

The effect of helical intake port geometry on in-cylinder swirl flow characteristics was studied. Two helical intake ports were selected to change swirl ratio, mean flow coefficient with the variation of valve lifts, valve eccentricity ratios and axial distance. The measurements were made by using an impulse swirl meter. The port B modified to increase the swirl ratio( $R_{s}$) had the tendency of the increased non-dimensional rig swirl ( $N_{r}$) distribution in comparison with that of the port A. And the $N_{r}$ distribution was remarkably improved at low valve lifts. The modification of the geometry to increase the swirl ratio ( $R_{s}$) in helical intake port resulted in the decrease of the mean flow coefficient ( $C_{f(mean)}$) regardless of valve eccentricity ratio ( $N_{y}$). And also non-dimensional rig swirl ( $N_{r}$) in the high valve lift affected the calculation of swirl ratio considerably.onsiderably.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.76-82
• /
• 2014

In this paper, an optimal power distribution algorithm is proposed for the small electric vehicle with front in-line and rear in-wheel motors. First, it is assumed that the vehicle driving torque and velocity are given conditions. And, an optimal problem is defined that finding the front and rear motor torques which minimizes the battery power. From the above optimization problem, the optimized front-rear motor torque distribution map is obtained. And, the vehicle simulations are performed to verify the performance of the optimal power distribution algorithm which is proposed in this study. The simulations are performed based on the federal urban driving schedule for two cases which are constant ratio power distribution, and optimal power distribution. From the simulation results, it is found that the optimal power distribution shows the 6.3% smaller battery energy consumption than the constant ratio power distribution.

• Journal of the Korean Data and Information Science Society
• /
• 제21권1호
• /
• pp.195-200
• /
• 2010

In this paper, we consider estimators and a condence interval for a reliability in two independent right truncated Rayleigh distributions and consider the density of a ratio in two independent right truncated Rayleigh distributions. And we obtain the density of an estimator for a changing point in the density of a ratio in two independent right truncated Rayleigh distributions.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.74-82
• /
• 2004

Planar laser-induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Acetone PLIF is chosen because fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone PLIF is applied to measure quantitative air excess ratio distribution in an engine fueled with LPG. Acetone is excited by KrF excimer laser (248nm) and its fluorescence image is acquired by ICCD camera with a cut-off filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile is suggested. Raw images are divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which is taken by a calibration process, are converted to air excess ratio distribution. This investigation shows instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.