• Geomechanics and Engineering
• /
• v.10 no.6
• /
• pp.827-836
• /
• 2016

The rate of softening is an important factor to determine whether the failure occurs along localized shear band or in a more diffused manner. In this paper, strength loss and softening rate effect depending on sensitivity are investigated for weakly cemented clays, for both artificially cemented high plasticity San Francisco Bay Mud and low plasticity Yolo Loam. Destructuration and softening behavior for weakly cemented sensitive clays are demonstrated and discussed through multiple vane shear tests. Artificial sensitive clays are prepared in the laboratory for physical modeling or constitutive modeling using a small amount of cement (2 to 5%) with controlled initial water content and curing period. Through test results, shear band thickness is theoretically computed and the rate of softening is represented as a newly introduced parameter, ${\omega}_{80%}$. Consequently, it is found that the softening rate increases with sensitivity for weakly cemented sensitive clays. Increased softening rate represents faster strength loss to residual state and faster minimizing of shear band thickness. Uncemented clay has very low softening rate to 80% strength drop. Also, it is found that higher brittleness index ($I_b$) relatively shows faster softening rate. The result would be beneficial to study of physical modeling for sensitive clays in that artificially constructed high sensitivity (up to $S_t=23$) clay exhibits faster strain softening, which results in localized shear band failure once it is remolded.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.239-256
• /
• 1997

The companion paper presents a new three-parameter model for the uniaxial rate-sensitive material response, which is based on a bilinear static stress-strain relationship with kinematic strain-hardening. This paper extends the proposed model to trilinear static stress-strain relationships for steel and concrete, and discusses the implementation of the new models within an incremental-iterative solution procedure. For steel, the three-parameter rate-function is employed with a trilinear static stress-strain relationship, which allows the utilisation of different levels of rate-sensitivity for the plastic plateau and strain-hardening ranges. For concrete, on the other hand, two trilinear stress-strain relationships are used for tension and compression, where rate-sensitivity is accounted for in the strain-softening range. Both models have been implemented within the nonlinear analysis program ADAPTIC, which is used herein to provide verification for the models, and to demonstrate their applicability to the rate-sensitive analysis of steel and reinforced concrete structures.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.221-237
• /
• 1997

This paper presents a new uniaxial material model for rate-sensitive analysis addressing both the transient and steady-state responses. The new model adopts visco-plastic theory for the rate-sensitive response, and employs a three-parameter representation of the overstress as a function of the strain-rate. The third parameter is introduced in the new model to control its transient response characteristics, and to provide flexibility in fitting test data on the variation of overstress with strain-rate. Since the governing visco-plastic differential equation cannot be integrated analytically due to its inherent nonlinearity, a new single-step numerical integration procedure is proposed, which leads to high levels of accuracy almost independent of the size of the integration time-step. The new model is implemented within the nonlinear analysis program ADAPTIC, which is used to provide several verification examples and comparison with other experimental and numerical results. The companion paper extends the three-parameter model to trilinear static stress-strain relationships for steel and concrete, and presents application examples of the proposed models.

• Computers and Concrete
• /
• v.32 no.5
• /
• pp.499-511
• /
• 2023

Anchor channels are commonly used for façade, tunnel, and structural connections. These connections encounter various types of loadings during their service life, including high rate or impact loading. For anchor channels that are placed close and parallel to an edge and loaded in shear perpendicular to and towards the edge, the failure is often governed by concrete edge breakout. This study investigates the transverse shear behavior of the anchor channels under quasi-static and high rate loadings using a numerical approach (3D finite element analysis) utilizing a rate-sensitive microplane model for concrete as constitutive law. Following the validation of the numerical model against a test performed under quasi-static loading, the rate-sensitive static, and rate-sensitive dynamic analyses are performed for various displacement loading rates varying from moderately high to impact. The increment in resistance due to the high loading rate is evaluated using the dynamic increase factor (DIF). Furthermore, it is shown that the failure mode of the anchor channel changes from global concrete edge failure to local concrete crushing due to the activation of structural inertia at high displacement loading rates. The research outcomes could be valuable for application in various types of connection systems where a high rate of loading is expected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.171-176
• /
• 2009

A rate-sensitive constitutive model was developed, with some simplifying assumptions, in the frame of the standard elastoplastic-viscous relation. The simulations performed using the model were successful for the normally consolidated cohesive soils with the advantage that the parameter values determined at a rate could be used at. different rates. Details on the parameters and additional modification of the model are presented in the successive paper.

• The Journal of Fisheries Business Administration
• /
• v.40 no.1
• /
• pp.153-172
• /
• 2009

Developing foreign fishing ground executed in various uncertainty such as fishing price, oil price, exchange rate. But traditional economic evaluation method, CVP(Cost-Volume-Profit) analysis doesn't consider uncertainty of foreign fishing ground. So we need new approach about economic evaluation that can take into account uncertainty. This study focus on the economic evaluation about experimental survey of tuna fishing grounds in the north pacific ocean by sensitive analysis and simulation. The results of the economic evaluation can be summarized as follows. First, when we take it for granted that the other uncertainty factors except for each fishing price, oil price, and exchange rate are constant. CVP gross sales has positive relation to the increasing rate of oil price, exchange rate(W/$) and negative relation to the increasing rate of fishing price and exchange rate(W/${\yen}$). Second, when we are supposing that fishing price, oil price, and exchange rate are followed. the probability of less than CVP gross sales is A ship(48.87%), B ship(49.64%), C ship(50.55%). Consequently, the economic evaluation by sensitive analysis and simulation is more useful tool than CVP(Cost-Volume-Profit) analysis under uncertainty.

• Korean Journal of Veterinary Research
• /
• v.15 no.1
• /
• pp.109-114
• /
• 1975

A total of 2,065 quarter milk samples of 534 dair cows from 35 herds were examined for mastis and the results obtained were as follows: 1. 654 quarters (31.6%) of 301 dairy cows (56.3%) from 34 herds (97.1%) were infected with mastitis. It was found that 8 cows (1.5%) showed clinical mastitis and other cows were subclinical. 2. Low infection rate of mastis was shown in first delivery cattle and higher infection rate in more deliverable of cattle. 3. The main causative organisms of the matitis were Staphylococcus aureus (19.4%), Streptococcus agalactiae (11.3%) and Streptococcus dysgalatiae (5%). 4. The majority of causative organisms were very resistant to colistin and highly sensitive to tetracycline. Especially Streptococcus strains were highly sensitive to leukomycin, and Staphylococcus aureus were highly sensitive to tetracycline and the other bacteria were highly sensitive to tetracycline and kanamycin.

• The Korean Journal of Nuclear Medicine
• /
• v.9 no.1
• /
• pp.59-71
• /
• 1975

53 patients with hyperthyroidism have been analyzed with special reference to therapeutic response to radioactive iodine ($^{131}I$) treatment. Mean effective half-life, 24 hour uptake rate and radiation dose of $^{131}I$ in hyperthyroid patients included in this study were respectively. 1. Mean effective half-life of $^{131}I\;was\;4.7{\pm}1.5$ days in the tracer dose and $5.0{\pm}1.5$ days in the therapeutic dose. 2. Mean 24 hour uptake rate of $^{131}I\;was\;72.7{\pm}11.1%$ in the tracer dose and $73.4{\pm}12.3%$ in the theapeutic dose. 3. Mean radiation dose of $^{131}I\;was\;5,319{\pm}2,648$ RAD as predicted and $5,692{\pm}2,843$ RAD as actual. A single dose of radioactive iodine treatment was satisfactory in 34 patients (radioiodine sensitive) and multiple doses of radioactive iodine treatments were required in 19 patients (radioiodine resistant). A radioiodine resistant group of patients with hyperthyroidism was distinctively characteristic in the following aspects. 1. Mean thyroid weight calculated in the resistant group ($63.9{\pm}14.0gm$) was significantly (p<0.01) greater than that of the sensitive group ($46.6{\pm}13.3gm$). 2. Mean 24 hour uptake rate of the tracer dose in the resistant group ($67.3{\pm}10.7%$) was significantly (p<0.01) lower than that of the sensitive group ($75.7{\pm}10.5%$). 3. Mean 24 hour uptake rate of the therapeutic dose in the resistant group ($68.5{\pm}13.7%$) was significantly (p<0.05) lower than that of the sensitive group ($76.1{\pm}10.9%$). 4. Mean predicted radiation dose, of $^{131}I$ in the resistant group ($3,684{\pm}1,745$ RAD) was significantly (p<0.01) lower than that of the sensitive group ($6,232{\pm}2,683$ RAD). 5. Mean actual radiation dose of $^{131}I$ in the resistant group ($4,100{\pm}1,691$ RAD) was significantly (p<0.01) lower than that of the sensitive group ($6,582{\pm}3,024$ RAD). 6. No significant difference was detected in terms of effective half-life of $^{131}I$ among the groups (p>0.05). 7. The average mean % difference of effective half-life, uptake rate and radiation dose measured following the tracer and therapeutic dose of $^{131}I$ were not statistically significant (p>0.05). Therefore effective half-life, uptake rate and radiation dose of the therapeutic dose of $^{131}I$ were readily predictable following the tracer dose of $^{131}I$. 8. It is concluded that the possibility of resistance to radioactive iodine treatment may be anticipated in patients with thyroid gland large in size and compromised $^{131}I$ uptake rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.596-601
• /
• 2009

In this study, the rate-sensitive constitutive model, which was developed in the previous paper of this journal, was validated using the experimental results obtained from the well-calibrated triaxial compression test conducted with the Boston blue clay. The validation was performed for the various cases of the strain rate of 0.05%/hr, 0.5%/hr, 5.0%/hr and OCR of 1, 2, 4, 8. The developed model was validated for the normally and slightly overconsolidated cases; however, the cases of heavily overconsolidation needs further research.

• The Journal of Fisheries Business Administration
• /
• v.40 no.1
• /
• pp.27-49
• /
• 2009

Recently, the Korea's economy concerns the second money crisis because of the rapid increase of the exchange rate. The Korea's economy which is very dependent on the foreign trade is more sensitive to the change of exchange rates. There are many literatures which analyze the effects of variations of the exchange rates on the secondary and tertiary industries such as the manufacturing industry and IT(Information Technology). But there have been no studies which try to figure out the effects of variations of exchange rate on the primary industries, especially, fisheries' industry. Therefore this paper tries to analyze the effect of price competition structure and the change of exchange rate on foreign fisheries exporting prices in Korea's fisheries import market. This study utilizes OLS(Ordinary Least Squares Analysis) for the analysis in the market of frozen yellow corvina, hairtail, angler fish which are major fisheries importable in Korea. The results show that the exporting country which has the highest market share is more sensitive to the change of the exchange rates itself than that of the other exporting countries' price when it starts to set up its exporting price. And the exporting countries which have low market share are more sensitive to the change of price which country has the highest market share than that of price whose countries have low market share and those of their exchange rate. Also we can find out that the countries which have similar market share try to set up price-setting strategy in the opposite direction. In other words, one country tries to bid up its price, other countries response to rival country by lowering their prices. In the consideration of the fact that most exporting countries aren't affected by Korea's fisheries' prices, the exporting countries in Korea's fisheries import market are more sensitive to the prices of other exporting countries than that of Korea's. This result indicates that the price leader-follower model could be applicable to the Korea's fisheries import market.