• Communications of Mathematical Education
• /
• v.34 no.3
• /
• pp.325-354
• /
• 2020

This study utilized longitudinal data from the 2013 year (Secondary Middle School) to 2017 year (Secondary High School) of the Seoul Education Termination Study. Using the latent growth model and the piecewise growth model, we investigated the changes in mathematics academic achievement, internal factors(self-concept, self-control, self-assessment of life satisfaction), and external factors(school climate, guardians) as students' grades increased, and examined whether internal factors and external factors influence the changes in mathematics academic achievement. We examined whether internal and external factors influence the change in academic achievement. As a result of analysis, it was found that mathematics academic achievement remained unchanged from the first grade of middle school to the second grade of middle school, and steadily increased from the second grade of middle school to the first grade of high school, and then decreased slightly in the second grade of high school. The internal and external factors had little change. It has been found that self-concept, self-control as internal factors, and school climate as external factors influence changes in mathematics academic achievement.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.101-108
• /
• 2006

The purpose of this study was to compare GRF characteristics during walking wearing jogging and roller shoes. Twelve male middle school students (age: $15.0{\pm}0.0\;yrs$, height: $173.6{\pm}5.0\;cm$, weight: $587.6{\pm}89.3\;N$) who have no known musculoskeletal disorders were recruited as the subjects. Kinematic data from six S-VHS camcorders(Panasonic AG456, 60 fields/s) and GRF data from two force platform; (AMII OR6-5) were collected while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and GRF recordings. GRF data were filtered using a 20 Hz low pass Butterworth. digital filter and further normalized to the subject's body weight. For each trial being analyzed, five critical instants and four phases were identified from the recording. Temporal parameters, GRFs, displacement of center of pressure (DCP), and loading and decay rates were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p <.05). Vertical GRFs at heel contact increased and braking forces at the end of initial double limb stance reduced significantly when going from jogging shoe to roller shoe condition. Robbins and Waked (1997) reported that balance and vertical GRF are closely related It seems that the ankle and knee joints are locked in an awkward fashion at the heel contact to compensate for the imbalance. The DCP in the antero-posterior direction for the roller shoe condition was significantly less than the corresponding value for the jogging shoe condition. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the DCP for the roller shoe condition was restricted The results indicate that walking with roller shoes had little effect on temporal parameters, and loading and decay rates. It seems that there are differences in GRF characteristics between roller shoe and jogging shoe conditions. The differences in GRF pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine muscle activation patterns and joint kinematics during walking with roller shoes.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.185-193
• /
• 2020

This purpose of this study was to investigate the effects of 16-week long-term walking exercise on the feeling, mood state, and life stress of college students. Participations in this study were 50 college students, and 24 Walking Group and 26 Control Group were random sampled to experiment the psychological effect of exercise walking. The experimental design was designed by factorial design by 2×3 repeated measurements. Data collection was conducted for 0week, 8week, 16week of feeling, mood state and life stress of college students. As a result, WG showed a positive increase in feeling status compared to CG. Negative mood state such as tension, anger, depression, fatigue, and confusion have been greatly reduced, vigor has increased, and stress on college student life such as friends, study, economy, future, and values has decreased statistically. The results of this study can be used as a way of coping with the stress of college students to improve their study motivation and quality of life.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.49-53
• /
• 2001

Vortical etching experiments of ($SrBi_2Ta_2O_9$)/Si thin films have been performed by using the inductively coupled plasma reactive ion etching (ICP-ME) apparatus. The purposes of these experiments are to get the effective area of vertical surface. Because this technology is very important to get good qualities of ferroelectric gate structure, capacitor and the minimum parasitic effects related to the excellent performances of the FRAM (Ferroelectric Random Access Memory) device. The reacting gases were Ar and $Cl_2$gases, and various $Ar/C1_2$flow ratios were used. The etching experiments were carried out at various RF powers such as 700, 700, 500W and at various DC powers such as 200, 150, 100, 50W, respectively. The maximum etch rate of $SrBi_2Ta_2O_9$/Si thin films was 1050 A/min at the $Ar/C1_2$ gas ratio of 20/16, RF power of 700 W and DC power of 200 W. From the SEM (scanning electron microscopy) image of the SBT thin films, the wall angle was as good as about $82^{\circ}$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.5
• /
• pp.492-501
• /
• 2001

The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively). The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were record ed than the group that didn't in measuring distanced 4(p<0.05). 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.236-236
• /
• 2008

(Bi,La)$Ti_3O_{12}$(BLT) thin film is one of the most attractive materials for ferroelectric random access memory (FRAM) applications due to its some excellent properties such as high fatigue endurance, low processing temperature, and large remanent polarization [1-2]. The authors firstly investigated and reported the damascene process of chemical mechanical polishing (CMP) for BLT thin film capacitor on behalf of plasma etching process for fabrication of FRAM [3]. CMP process could prepare the BLT capacitors with the superior process efficiency to the plasma etching process without the well-known problems such as plasma damages and sloped sidewall, which was enough to apply to the fabrication of FRAM [2]. BLT-CMP characteristics showed the typical oxide-CMP characteristics which were related in both pressure and velocity according to Preston's equation and Hernandez's power law [2-4]. Good surface roughness was also obtained for the densification of multilevel memory structure by CMP process [3]. The well prepared BLT capacitors fabricated by CMP process should have the sufficient ferroelectric properties for FRAM; therefore, in this study the electrical properties of the BLT capacitor fabricated by CMP process were analyzed with the process parameters. Especially, the effects of CMP pressure, which had mainly affected the removal rate of BLT thin films [2], on the electrical properties were investigated. In order to check the influences of the pressure in eMP process on the ferroelectric properties of BLT thin films, the electrical test of the BLT capacitors was performed. The polarization-voltage (P-V) characteristics show a decreased the remanent polarization (Pr) value when CMP process was performed with the high pressure. The shape of the hysteresis loop is close to typical loop of BLT thin films in case of the specimen after CMP process with the pressures of 4.9 kPa; however, the shape of the hysteresis loop is not saturated due to high leakage current caused by structural and/or chemical damages in case of the specimen after CMP process with the pressures of 29.4 kPa. The leakage current density obtained with positive bias is one order lower than that with negative bias in case of 29.4 kPa, which was one or two order higher than in case of 4.9 kPa. The high pressure condition was not suitable for the damascene process of BLT thin films due to the defects in electrical properties although the better efficiency of process. by higher removal rate of BLT thin films was obtained with the high pressure of 29.4 kPa in the previous study [2].

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.385-396
• /
• 2014

Objectives: By conducting a meta-analysis of cohort studies reporting standardized mortality ratios (SMRs) for workers exposed to trichloroethylene, we attempted to adjust for healthy hired effect by applying the same methods as described in a recent report from the Agricultural Health Study. Methods: Among all cohort studies that evaluated the association between all cancer, non-Hodgkin's lymphoma (NHL), kidney cancer, liver cancer and occupational exposure to trichloroethylene, a total of 10 studies reporting SMR values were selected. A random-effects model was used to estimate the summary SMRs or rSMRs and 95% confidence intervals. Relative SMR ($rSMR=SMR_x/SMR_{not\;x}$) was calculated comparing observed and expected counts for all cancer, NHL, kidney cancer, and liver cancer with an independent referent set of values consisting of the observed and expected counts for other causes. Results: The SMR values for all causes ranged from 0.68 to 1.03, suggesting moderate to weak healthy worker effect for the selected studies. When the healthy worker hire effect was taken into account, the summarized risk became statistically significant; the summary SMR of all cancer was 0.95 (0.91-1.00) and the summary rSMR of all cancer was 1.10 (1.04-1.15). The summary SMR of NHL was 1.04 (0.93-1.14) and the summary rSMR of NHL was 1.23 (1.04-1.46). The summary SMR of kidney cancer was 1.08 (0.88-1.33) and the summary rSMR of kidney cancer was 1.23 (1.02-1.49). The summary SMR of liver cancer was 0.88 (0.78-0.99), and the summary rSMR of liver cancer was 0.95 (0.84-1.07). Conclusion: The rSMR method is useful to determine summary risk adjusted for healthy worker effect through meta-analysis.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.317-331
• /
• 2012

The purpose of this study was to verify the relationship among servant leadership, empowerment and sports satisfaction of badminton coaches by self-leadership. Among national badminton players, total 343 copies of data were collected and used at the study by using of random sampling. The normal distribution on data and the validity and reliability for each factors were proven to confirm through descriptive statistics, exploratory & confirmatory factor analysis and reliability analysis with SPSS 18.0 and AMOS 18.0 program. The relationship among each factors by the purpose of study were analyzed by correlation analysis and structural model analysis. The results were as follows. First, the servant leadership of badminton coaches had positive effect on empowerment. Second, the servant leadership of badminton coaches had positive effect on self-leadership. Third, the servant leadership of badminton coaches had positive effect on sports satisfaction. Fourth, empowerment had positive effect on sports satisfaction. Fifth, self-leadership had positive effect on sports satisfaction. Sixth, for the relationship between servant leadership and sports satisfaction, empowerment and self-leadership had indirect effects.

• Journal of the Korean institute of surface engineering
• /
• v.13 no.3
• /
• pp.146-154
• /
• 1980

The effects of various electrodeposition conditions (deposition temperature and cathode current density) on preferred orientation and microhardness of electrodeposited Ni-Sn and Sn-Zn alloys were studied. At deposition temperatures from 25$^{\circ}$ to 95$^{\circ}C$ and constant cathode current density of 270 and 530 A/$m^2$ Ni-Sn and Sn-Zn were codeposited in chloride-fluoride acid and stannate-cyanide alkaline electrolyte bath respectively. Ni-Sn alloy deposited at temperatures from 25$^{\circ}$ to 35$^{\circ}C$ was composed of single phase of $Ni_3Sn_4$ with 73 wt.% Sn and the one deposited at temperatures from 45$^{\circ}$ to 95$^{\circ}C$ was made of multiphase mixture of NiSn, $Ni_3Sn_2$ and $Ni_3Sn_4$ with nearly equiatomic composition (65.5 wt.% Sn). The random orientation of thermody-namically metastable NiSn phase (hexagonal structure) predominated at deposition temperature range 25$^{\circ}$-45$^{\circ}C$, and the strong (110) preferred orientation was found at 65$^{\circ}$-85$^{\circ}C$ and then disappeared again at 95$^{\circ}C$. The microhardness of Ni-Sn deposits increased with deposition temperature up to 85$^{\circ}C$, and then decreased at constant cathode current density. The preferred orientation and the maximum microhardness were discussed in terms of lattice contractile stress which result from desorption of hydrogen atom absorbed in deposit lattice. The Sn content of Sn-Zn alloy deposits increased with deposition temperature up to 75$^{\circ}C$, and then decreased at constant cathode current density of 530 A/$m^2$. It also decreased with cathode current density up to 530 A/$m^2$, and then increased at constant deposition temperature of 25$^{\circ}C$. Sn-Zn alloy deposits were composed of two-phase mixture of ${beta}$-Sn and Zn. The preferred orientations of ${beta}$-Sn (tetragonal structure) changed with deposition temperature. The microhardness of Sn-Zn deposits decreased with deposition temperature. It also increased with cathode density up to 530 A/$m^2$, and then decreased at constant deposition temperature of 25$^{\circ}C$. The microhardness of Sn-Zn deposits was observed to be determinded more by the Sn content than by the preferred orientation.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.295-309
• /
• 2006

This study was conducted among 831 industrial workers in Gumi City in Gyung-Sang-Buk Do for the purpose of acquiring knowledge to improve quality of life though industrial workers' oral health promotion. Oral examination and questionnaire surveying were used to evaluate workers' oral health state and subjective health state and analyze their effect on quality of life. 1. The number of workers in the study were 831 in all; there were more males who accounted for 74.6%. 43.7% of the subject were 29 years old, accounting for the largest age group. Their academic backgrounds are 53.6% workers who graduated from high schools or lower educational institutions, and 46.4% workers who graduated from college or higher educational institutions. 80.7% of the subjects replied that their economic state belonged to the middle class. Their job classification indicates that 70.2% were working in production and engineering fields and that the seniority of 55.3% workers was less than 55.3%. 2. The result of evaluating the effects of oral health state on individual well-being and quality of life using OHIP indicates that younger people, singles(p<0.01) than the married, those in worse economic situation and those with shorter seniority(p<0.01) had higher effect of oral health state on quality of life. In addition, those whose health or oral health was not good (p<0.01), those with liked tough texture of food and snacks(p<0.05), those with more frequency of drinking(p<0.01) and those with more smoking tended to have higher effect of oral health state on daily life or quality of life. Besides, OHIP confirmed that oral health state is a measurement tool that can evaluate its effect on individual well-being and quality of life. The suggestion for future studies is to develop Korean style OHIP that can be used conveniently and efficiently by expanding the subject area up to the whole country and validating the samples gained from random sampling.