• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.903-908
• /
• 2005

Existing ATC/ATO/TWC system has a ATC(Automatic Train Control) antenna for receiving the speed code, a ATO(Automatic Train Operation) antenna for obtaining the exact distance to go to platform and TWC(Train and Wayside Communication) antenna for communication between on-board and wayside system. This paper proposes the ATO/TWC antenna with tele-powering module, telegram transmitter/receiver module. This antenna communicates with a passive type tag(wayside Precision Stop Marker) for the information of distance from the stop position and a active type tag for the door command and status in the platform.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1746-1751
• /
• 2007

The bullet train runs more than 200km/h so that it is invisible to the naked eye. For this reason, KTX solely dependent on the ATC operation system. Above all things, 'stability' and 'regular time' are essential to Train Control Operation system. But intermittently, there is a signal transmission problem between ATC operation facilities and ground equipments. which is caused by wheel sliding and friction coefficient between wheel and rail when the train starts. This paper analyzed train service data for one year for accurate survey. In addition, this thesis examines the main cause of a signal transmission problem through simulation and experiment. Further, the method to solve the conventional problem is presented.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.980-986
• /
• 2007

본 연구는 매우 짧은 차간 간격을 요구하면서 차량 간의 충돌을 피하기 위해서 매우 정확한 속도제어를 필요로 하는 개인 고속 이동 시스템의 운행제어 알고리즘의 검증을 위한 검증 시스템의 설계에 대해서 다룬다. 검증시스템은 모의 차량, 중앙제어 시스템, 모의지상설비, 모니터링 장치로 구성된다. 모의차량은 총 4EA의 서버(노트북)로 구성 하며, 중앙(지역)제어시스템은 산업용 Motorola사(社)의 PowerPC기반 프로세서 모듈 및 I/O 보드 장치로 구성한다. 모의지상설비는 National Instruments社의 PXI 산업용 제어기를 사용하여 구현한다. 설계된 검증시스템의 시험을 위해서 Labview Simulation Interface Toolkit 과 Matlab/Simulink 가 결합된 환경하에서 모의시험을 거친 시험용 알고리즘을 이용한다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1962-1967
• /
• 2008

A event recorder system stores a train speed and the related information for train operation in real time. Using those information, we can analysis the train operation and the reason of train accident. Currently the event recorder only manipulate the data related the train operation mechanically and electrically. In this paper we propose the event recorder to record the voice communication between the manager in the control center and train operator. By recording the voice communication in the high speed train, the correctness of analysis of train accident can be increased. The system architecture of the event recorder with voice recording is studied and interface between other equipment is proposed. And the software architecture of new event recorder is developed. We study the method of converting analog voice signal into digital data and compressing method. Also the architecture of memory to store the compressed voice data and regeneration of original analog voice are studied.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1936-1945
• /
• 2008

In Korea, TCN has applied to the Korean High-speed Train (HSR350X) through G7 High-speed Train development project. TCN is the most suitable international standard communication network for distributed control systems that is adopted for high-speed of vehicle, safety and flexibility. TCN is the network exclusively for the high-speed train and electrical trains. This TCN satisfies the network standards. The network standards are real time communication, fault tolerance design, integrated data system, resistance of environment, automated recognition for modification of vehicle formation and maintenance. The purpose of this research is applying the development of WTB analyzer which is part of communication network system TCN, to check the communication of high-speed trains and electrical trains.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.574-580
• /
• 2009

This study is investigate the bending behavior of real size RC beams strengthened with carbon fiber sheets. For experimental study, 1 control beam and 8 strengthened beams of real size(4 NU-beams and 4 U-beams) are tested and compared. NU-beam has not a V-shaped band and V-beam has a V-shaped band. The variables of experiment are composed of the number of carbon fiber sheets, the existence of U-shaped band, and four point loading, etc. The experimental results showed that the strengthening system with U-shaped band controls the premature debonding and provides a more ductile failure mode than the strengthening system without V-shaped band. It can be found from the load-deflection curves that as the number of fiber sheets is increased, the maximum strength and the flexural rigidity is increased. For the strengthening method with carbon fiber sheets of the real size RC beams, it is required the finding a solution to the bonding problem.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.24-29
• /
• 2001

Despite of the introduction some sorts of the contract and the bid method like CM(Construction management) that will be efficient to manage the construction project. Korean agencies limit to control project management to do large public constructions. In the case of Taiwan, THSRC is apply J/V system in the public construction project, they are accomplishing that expend optimal the cost and save the construction time. To success J/V it has two factors, one is risk management and another is sharing information of construction project. Therefore, we will study to introduce J/V system to our construction project.

• Journal of Applied Reliability
• /
• v.8 no.4
• /
• pp.167-179
• /
• 2008

System risk is the totality of all safety risks to customers, employees, suppliers, and other third parties that arise due to system operations. To assess the risk of major hazards with the potential to cause fatality to the customers and other members of the public, quantitative risk assessment methodologies are used. This paper presents the general principles of risk based management approach to improve the safety of high risk systems such as aviation, railway, and nuclear power plants. For the suitable risk control arrangement, case studies of acceptable risk level, risk rating matrix, and safety management philosophy are presented.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.183-189
• /
• 2003

In this paper a simulation was done to verify performance of a message transmission protocol which interfaces LDTS(Local Data Transmission System) with EIS(Electronic Interlocking System), After a stage of analyzing link specifications between LDTS and EIS, transmission messages and messaging formats, simulation parameters were extracted, applied to the error control schemes such as ARQ, FEC, HARQ, and therefrom throughputs and various performance indices were analyzed Simulation program was constructed with Matlab and Matlab GUI and then converted into a stand-alone c++ program to be used on any non-Matlab environments.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1005-1009
• /
• 2005

The On Board Computer System (ORCS) used for rolling stocks is one of the core equipments in trains, which deals with collecting real-time data of a train to display and record the train's statuses, control the train, and support the driver and maintenance function. Resides, due to high reliability and high speed communication required lately for various electronics including signal1ing devices, train protection system, and multimedia, the necessity of a more robust train communication network is on the lise. This study aims at understanding the technological trend of the current train communication network in order to rapidly cope with the tendency above and providing fundamental data for designing a more advanced communication network for high-speed trains hereafter.