• International Journal of Control, Automation, and Systems
• /
• 제2권4호
• /
• pp.435-449
• /
• 2004

In this paper, a novel anti-sway control system that uses an inclinometer as a sway sensor is investigated. The inclinometer, when compared with a vision system, is very cheap, durable, and easy to maintain, while providing almost the same performance. A number of observers to estimate the angular velocity of the load and the trolley velocity are presented. A state feedback controller with an integrator is designed. After a time-scale analysis, a 1/4-size pilot crane of a rail-mounted quayside crane was constructed. The performance of the proposed control system was verified with a real rubber-tired gantry crane at a container terminal as well as with the constructed pilot crane. Experimental results are provided.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.119-122
• /
• 2001

This paper deals with new type of active magnetic bearing (AMB) for the linear motors. We adopted optical sensing mechanism for the gap sensing. Using the laser and the PSD (Position Sensitive Device), the absolute rotor position is obtained independent of the profile of the guide rail. With this measurement, the rotor can be controller to follow the straight beam of the laser. Another advantage of optical sensing mechanism might be the elimination of the possible interference between the proximity sensor and the electro-magnet. By adopting the push-full actuating mechanism, the bearing stiffness is increased near the equilibrium position. For the simplicity, distributed control system is constructed. Eight independent PID control algorithm is used with the full order observer. Several simulation md test results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.431-433
• /
• 1996

In MAGLEV system, the train detection can be achieved by using cross inductive radio lines and antennas, because it is impossible to obtain the short circuit between rail and iron-wheel. In this paper, the experimental results of speed profile which is held on MAGLEV at KIMM are presented. We could obtain the successful experimental results for the speed pulses by the inductive radio lines.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1132-1137
• /
• 2008

Automatic Operation based on ATO (Automatic Train Operation) is necessary for driverless Light Rail Transit business. When this kind of driverless LRT operation plan is made, TPS (Train Performance Simulation) is traditionally simulated at all-out mode and coasting mode based on manual operation. Commercial schedule speed equals to all-out speed minus $9{\sim}15%$ make-up margin. Coasting mode TPS simulation is also run at commercial schedule speed to calculate run time and energy consumption. But TPS based on manual operation should make an improvement on accuracy in case of driverless LRT operation Plan. In this paper, new fast mode TPS simulation using ATO pattern is proposed and show near actual ATO result. The actual ATO pattern can be accurately simulated with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. Normal mode TPS simulation for commercial schedule speed can be designed to have fast mode trip time plus 3 seconds/km margin recommended by korean standard LRT specification.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.547-555
• /
• 2016

철도차량의 휠의 마모는 주로 곡선 주행 시 발생한다. 휠의 형상 변화는 차량 동적 안정성에 중요한 영향을 미친다. 본 연구에서는 곡선 주행 시 휠 마모 특성 분석을 위해 곡선 반경 크기와 속도를 변경시키면서 휠 마모량을 계산하였다. 다물체 동역학 해석에 기초한 차량 동역학 해석결과로부터 마모인자를 계산하고 BRR(British Rail Research)에서 제시한 마모 모델을 이용하여 휠의 마모량을 계산하였다. 반경 300m에서의 마모량이 다른 반경과 비교하여 매우 큰 것으로 나타났다. 곡선 선로에 윤활유를 도유하는 경우 마모 특성 변화를 분석하기 위해 휠의 답면과 플랜지 부위의 마찰계수를 다르게 하여 휠 마모량을 계산하였다. 도유 시 휠 마모의 개선 효과를 여러 반경에서 계산하고 실제 도시철도구간에서 마모 개선 효과를 확인하였다.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.609-615
• /
• 2012

무인운전 경전철 운전계획을 위해 수동운전 기반의 TPS(Train Performance Simulation) 대신에 ATO(Automatic Train Operation) 자동운전에 기반한 TPS가 요구된다. 본 논문은 ATO 패턴을 사용하는 새로운 TPS 모델을 제시하고, 서울지하철 6호선의 시험구간과 부산-김해 경전철 전체 노선의 실제 자동운전 운행결과와 시뮬레이션 결과를 비교하였다. 실제와 유사한 ATO 운행패턴은 상용감속도, 저크, 역정차감속도, 구배환산거리의 4가지 파라미터를 도입한 새로운 TPS 모델에 의하여 매우 정밀하게 시뮬레이션 될 수 있다. 무인 자동운전을 위한 상업운전용 표정시분은 ATO기반 TPS의 "Fast" 운전모드 운행시간에 경전철 표준사양에 따라 km당 3초의 여유를 가지도록 본 논문에서 제시된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.75-80
• /
• 2011

In the area of wheel on rail vehicle, hunting stability which is generated by lateral motion is one of important characteristics for running safety. It might cause not only oscillation of vehicle but also derailment in an unstable area of the high speed. A Maglev vehicle is usually controlled the voltage to maintain the air gap between electromagnet and track. However, in Maglev system, an occurrence possibility of hunting motion could be high, because Maglev vehicle is not controlled directly lateral force between electromagnet and track in the curved guideway. In this paper, running safety is evaluated when Maglev vehicle run on guideway at high speed according to installment of damper between maglev vehicles and bogies, and to analyze the effect of it. Also, the parametric study is carried out for selecting effective lateral damper properties through the simulation. To accurately predict the running safety, 3d multibody dynamics models which are included air spring, guideway conditions and irregularities profile are used. With the results acquired, suggestions were made whether to adopt the damper and how to optimize the damping characteristics.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.70-76
• /
• 2002

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective machina work practically to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13$\mu$m of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07$\mu$m of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by an unskilled person after he experienced a little of preliminary machining training. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.591-604
• /
• 2022

A gravity wall combined with an anchoring lattice frame (a combined retaining structure) is adopted at a typical engineering site at Dali-Ruili Railway Line China. Where, the combined retaining structure supports a soil deposit covering on different inclined rock slopes. With an aim to investigate and compare the effects of inclined rock slopes on the response of combined retaining structure under seismic excitation, three groups of shaking table tests are conducted. The rock slopes are shaped as planar surfaces inclined at angles of 20°, 30°, and 40° with the horizontal, respectively. The shaking table tests are supplemented by dynamic numerical simulations. The results regarding the horizontal acceleration response, vertical acceleration response, permanent displacement mode, and axial anchor force are comparatively examined. The acceleration response is more susceptible to outer structural profile of combined retaining structure than to inclined angle of rock slope. The permanent displacement decreases when the inclined angle of the rock slope increases within a range of 20°-40°. A critical inclined angle of rock slope exists within a range of 20°-40°, and induces the largest axial anchor force in the combined retaining structure.

• 한국지능시스템학회논문지
• /
• 제27권2호
• /
• pp.106-112
• /
• 2017

본 논문에서는 자기부상 물류이송시스템의 부상 및 추진제어기 설계 방법을 제안하였다. 부상제어기는 롤과 피치 움직임을 최소화시키기 위해 전자석간의 상호영향을 고려하여 설계하였다. 자기부상이송시스템의 구조적인 단점을 해결하기 위하여 기준입력단에 지수형 필터를 적용하여 기존 제어기의 문제점을 개선하였다. DSP기반의 제어하드웨어를 개발하고, 정격 공극 부상 실험을 통해 부상제어기법이 설계 목표를 만족함을 검증하였다. 추진제어기는 공간벡터 전압변조기법을 사용하고, 레일의 전 구간에 부착된 바코드 정보로부터 절대위치를 감지하여 위치 및 속도 프로파일을 추종하도록 설계하였다. 추진제어 왕복 이동 실험을 통해 위치 제어 결과가 만족할만한 성능임을 확인하였다.