• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.214-220
• /
• 1999

In order to use effectively a machinery part with fillet, it is necessary to determine a proper fillet shape in design step, Study of such problem by fracture mechanical criterion is rare. So, this paper focuses on the design of fillet radius in fracture mechanical aspect. Finite element method was used to obtain crack tip stress intensity factor. Stress intensity factor was calculated by COD(crack opening displacement0method proposed by Ingraffea and Manu. The parameter used in this study are thickness ration, filet radium and crack length . If fillet radius increase , crack propagation may be accelerated. Critical crack length is inversely proportional to fillet radius.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.104-109
• /
• 2001

The stress distributions of hydranlic actuator cylinder tube acting in uniform inner pressure were analysed by the boundary element method(BEM). STKM13C tube was utilized for machine structural purposes model, its inner radius was 100 mm and outer radius was 140 mm. Axial length was semi-infinite and the isoparametric element of BEM was used. Radial and tangential stresses are maximum(-20.3 MPa and 52 MPa) at the inner radius and the minimum at the outer radius of the hydraulic actuator cylinders for an industrial systems. Stress diminution ratio was about 0.6 MPa/mm. And then coincidence between the simulation techniques as exact results(Lame' equation) and finite element method(FEM) is found to be fairly good, showing that the proposed analysis by BEM is reliable.

• 한국CDE학회논문집
• /
• 제10권2호
• /
• pp.114-120
• /
• 2005

This paper presents a novel method for radius measurement of fillet regions of polygonal models by using optimum onhogonal planes. The objective function for finding an optimum onhogonal plane is designed based on the orthogonality between the normal vectors of the faces in a filet region and the plane that is to be found. Direct search methods are employed to solve the defined optimization problem since no explicit derivatives of the object function can be calculated. Once an optimum orthogonal plane is obtained, the intersection between the onhogonal plane and the faces of interest is calculated, and necessary point data in the fillet region for measuring radii are extracted by some manipulation. Then, the radius of the fillet region in question is measured by least squares fitting of a circle to the extracted point data. The proposed radius measuring method could eliminate the burden of defining a plane for radius measurement, and automatically find a necessary optimum orthogonal plane. It has an advantage in that it can measure fillet radii without prior complicated segmentation of fillet regions and explicit information of neighboring surfaces. The proposed method is demonstrated trough some mea-surement examples.

• Journal of applied mathematics & informatics
• /
• 제23권1_2호
• /
• pp.127-140
• /
• 2007

We present the boundary value problem (BVP) for the heave motion due to a vertical circular cylinder in water of finite depth. The BVP is presented in terms of velocity potential function. The velocity potential is obtained by considering two regions, namely, interior region and exterior region. The solutions for these two regions are obtained by the method of separation of variables. The analytical expressions for the hydrodynamic coefficients are derived. Computational results are presented for various depth to radius and draft to radius ratios.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.924-928
• /
• 2018

The objective of this study is to solve a problem that is occurred during the spline machining of tubular shaft yoke in both side IMS module. In order to simulate the problem, the movement direction of upper die was set as standard case and error case. The material of tubular shaft yoke was set to S20C as refer to the analysis library. The movement directions of upper die were separated with standard case and error case. The error case was set to simulate the problem in the spline machining of tubular shaft yoke. In order to solve the problem, the outer radius of upper die were modelled from 9.40mm to 9.44mm. The simulation results were analyzed and compared in terms of effective stress, metal flow line and folding phenomena characteristics. In case of the outer radius of upper die was 9.42mm, it was observed a relatively uniform effective stress distribution and had a straight metal flow line.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.183-192
• /
• 2013

This paper presents formation reconfiguration using impulsive control input for spacecraft formation flying. Spacecraft in a formation should change the formation size and/or geometry according to the mission requirements and space environment. To modify the formation radius and geometry with respect to the leader spacecraft, the follower spacecraft generates additional control inputs; the two impulsive control inputs are general control type of the spacecraft system. For the impulsive control input, Lambert's problem is modified to construct the transfer orbit in relative motion, given two position vectors at the initial and final time. Moreover, the numerical simulation results show the transfer trajectories to resize the formation radius in the radial/along-track plane formation and in the along-track/cross-track plane formation. In addition, the maneuver characteristics are described by comparing the differential orbital elements between the reference orbit and transfer orbit in the radial/along-track plane formation and along-track/cross-track plane formation.

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.141-151
• /
• 2019

A novel theoretical solution is presented for created (zero initial radius) cavity expansion problem based on CamClay model and considers the effect of initial anisotropic in-situ stress and drained conditions. Here the strain of this theoretical solution is small deformation in elastic region and large deformation in plastic region. The works for cylindrical and spherical cavities expanding in drained condition from zero initial radius are investigated. Most of the conventional solutions were based on the isotropic and undrained condition, however, the initial stress state of natural soil mass is anisotropy by soil deposition history, and drained cavity expansion calculation is closer to actual engineering in permeable soil mass. Finally, the parametric study is presented in order to the engineering significance of this work.

• 대한수학회보
• /
• 제60권4호
• /
• pp.873-893
• /
• 2023

In 2017, Nikiforov proposed the A_𝛼-matrix of a graph G. This novel matrix is defined as A_𝛼(G) = 𝛼D(G) + (1 - 𝛼)A(G), 𝛼 ∈ [0, 1], where D(G) and A(G) are the degree diagonal matrix and adjacency matrix of G, respectively. Recently, Zhai, Xue and Liu [39] considered the Brualdi-Hoffman-type problem for Q-spectra of graphs with given matching number. As a continuance of it, in this contribution we consider the Brualdi-Hoffman-type problem for A_𝛼-spectra of graphs with given matching number. We identify the graphs with given size and matching number having the largest A_𝛼-spectral radius for ${\alpha}{\in}[{\frac{1}{2}},1)$.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권3호
• /
• pp.135-139
• /
• 2009

여러 문자열들을 비교하여 유사성 또는 거리(오차)를 계산하는 문제는 패턴매칭, 웹검색 바이오인포매틱스, 컴퓨터 보안 등 다양한 응용 분야와의 연관성으로 인해 활발히 연구되어 왔다. 주어진 문자열 집합 내의 여러 문자열들의 거리를 비교하기 위해 주어진 집합 내의 모든 문자열들을 대표하는 한 문자열(대표문자열)을 찾는 방법이 있다. 대표문자열 방법은 주어진 문자열 집합과 가장 유사한 한 문자열을 찾는 방법으로 주로 이용되는 목적함수는 거리반경과 거리합이 있다. 거리반경은 집합 내의 문자열들과 특정 문자열과의 거리들의 최대값으로 정의되며, 모든 문자열들 중에서 최소의 거리반경을 만드는 문자열을 주어진 문자열 집합에 대한 거리반경기반 대표문자열이라 한다. 거리합은 집합 내의 문자열들과 특정 문자열과의 거리들의 합으로 정의되며, 모든 문자열들 중에서 최소의 거리합을 만드는 문자열을 주어진 문자열집합에 대한 거리합기반 대표문자열이라 한다. 본 논문에서는 메트릭 거리함수에 대해 거리반경기반 대표문자열 문제가 NP-완전임을 증명한다.

• Archives of Reconstructive Microsurgery
• /
• 제16권2호
• /
• pp.100-107
• /
• 2007

Treatment of giant cell tumor of distal radius can be treated in several ways according to the aggressiveness of the tumor. But the management of giant cell tumor involving juxta-articular portion has always been a difficult problem. In some giant cell tumors with bony destruction, a wide segmental resection may be needed for preventing to recur. But a main problem is preserving of bony continuity in bony defect as well as preservation of joint function. We have attempted to overcome these problems by using a microvascular technique to transfer the fibula with peroneal vascular pedicle or anterior tibial vessel as living bone graft. From April 1984 to July 2005, we performed the reconstruction of wide bone defect after segmental resection of giant cell tumor in 14 cases, using Vascularized Fibular Graft, which occur at the distal radius. VFG with peroneal vascular pedicle was in 8 cases and anterior tibial vessel was 6 cases. Recipient artery was radial artery in all cases. Method of connection was end to end anastomosis in 11 cases, and end to side in 3 cases. An average follow-up was 6 years 6 months, average bone defect after wide segmental resection of lesion was 6.8 cm. All cases revealed good bony union in average 6.5 months, and we got the wide range of motion of wrist joint without recurrence and serious complications. Grafted bone was all alive. In functional analysis, there was good in 7 cases, fair in 4 cases and bad in 1 case. Pain was decreased in all cases but there was nearly normal joint in only 4 cases. Vascularized fibular graft around wrist joint provided good functional restoration without local recurrence.