Journal of Power System Engineering (동력기계공학회지)
- Volume 5 Issue 1
- /
- Pages.104-109
- /
- 2001
- /
- 2713-8429(pISSN)
- /
- 2713-8437(eISSN)
Analysis of the Stresses for Hydraulic Actuator Cylinders using Boundary Element Method
경계요소법을 이용한 유압 엑츄에이터 실린더의 응력해석
Abstract
The stress distributions of hydranlic actuator cylinder tube acting in uniform inner pressure were analysed by the boundary element method(BEM). STKM13C tube was utilized for machine structural purposes model, its inner radius was 100 mm and outer radius was 140 mm. Axial length was semi-infinite and the isoparametric element of BEM was used. Radial and tangential stresses are maximum(-20.3 MPa and 52 MPa) at the inner radius and the minimum at the outer radius of the hydraulic actuator cylinders for an industrial systems. Stress diminution ratio was about 0.6 MPa/mm. And then coincidence between the simulation techniques as exact results(Lame' equation) and finite element method(FEM) is found to be fairly good, showing that the proposed analysis by BEM is reliable.