• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.44-49
• /
• 2013

LED communication is a wireless communication technology to transmit information using visible light coming out from the LED(Light Emitting Diode). It is a technique that can overcome RF(Radio Frequency) communication problems that are frequency allocations, human body hazards, security vulnerabilities, and interference between electronic devices. As a technique that can be used as lighting and communications with using LED, LED communication is suitable for ubiquitous environment. This paper introduces the process of data transmission algorithm for LED communication systems algorithm using LED, PD(Photodiode), and MCU(Micro Controller Unit).

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.32-37
• /
• 2022

As semiconductors become finer, equipment must perform precise and accurate processes to achieve the desired wafer fabrication requirement. Radio frequency power delivery system in plasma system plays a critical role to generate the plasma, and the role of impedance matching unit is critical to terminate the reflected radio frequency power by modifying the impedance of the matching network in the plasma equipment. Impedance matching unit contains one fixed inductor and two variable vacuum capacitors whose positions are controlled two step motors. Controlling the amount of vacuum variable capacitor should be made as soon as possible when the mismatched impedance is detected. In this paper, we present the impedance matching algorithm using the phase sensor.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.119-120
• /
• 2021

Radio equipment for maritime service and navigation aids installed on fishing vessels are required to comply with the performance standards KN60945_60533 that apply IEC 60945. The LTE-M transceiver was excluded from the target because it did not belong to the radio equipment of the ship station, and it acted as a cause of audible noise in the radio equipment for maritime service installed in the fishing vessel due to interference by radiated emission or conducted emission. In this paper, we analyze the impact of interference based on related cases and present institutional solutions for the diversification of LTE-M.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.51-60
• /
• 2003

This paper is the research and development including the system design and the prototype system building of the 400MHz wide-band digital autocorrelation spectrometer system for radio astronomy observation, which will be used as back-end signal processing unit of the Dual channel SIS receiver at Taeduk Radio Astronomy Observatory. So in this paper, we performed development of the high speed digitizing sampler, the circular memory buffer, and the correlator module for the 400MHz wide-band digital autocorrelator. This developed system will be use at TRAO after the housing and some calibration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.583-584
• /
• 2022

Due to the development of drones, drone missions are performed in various fields, and BVLOS (Beyond Visual Line Of Sight) flight is performed in a wide area. Most drones operate through radio frequency (RF) communication and can only fly in a limited radius of about 1-2 km. To overcome this, in this paper, we propose a multi-communication protocol-based drone control system to control drones performing missions in BVLOS using RF and LTE (Long Term Evolution). The proposed system consists of a control unit and a drone unit. The control unit transmits one control signal generated from the remote controller through RF and LTE. The drone unit classifies the control signal transmitted through RF and LTE according to the priority of the communication protocol and delivers it to the FC (Flight Controller). Through the proposed control system, it is possible to overcome the RF communication distance limit and prevent the communication disconnection situation.

• 연구논문집
• /
• s.24
• /
• pp.49-61
• /
• 1994

In this paper, the experimental unit of the cross inductive radio line and two linear induction motors driven by IGBT inverter for train control was made. In actual condition, the track has straight line, but so as to be able to achieve in small space, the unit prepared was shaped into two circular plates. Then by detecting inductive signal, the position data could be obtained. Also the equipment representing speed and thrust of LIM and train position by means of the experimantal unit could be composed.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.2
• /
• pp.4-10
• /
• 1993

In mobile radio communication, propagation paths are time or spacial varying because of the motion of mobile unit. The propagation path loss not only involves frequency and distance but also the antenna height at both the base station and the mobile unit, terrain configuration, and the man made en- vironment. Thhese additional factors make the prediction of propagation path loss of mobile radio signals more difficult. In this paper, it is measured field strenght of mobile radio signals in Daejeon and Seoul area, also calculated local median, 500m sample mean, and stadard deviation. As the result of analysis, it can be seen that propagation path loss of measured data is similiar to predicted field strength, especially local median is dependent upon base antenna height, terrain configuration and the man-made environment. The standard deviation has been noted to lie between 2 and 10 dBuV.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.83-86
• /
• 2003

This paper is the research and development including the system design and the prototype system building of the wide-band digital autocorrelation spectrometer system for radio astronomy observation, which will be used as back-end signal processing unit of the Dual channel SIS receiver at Taeduk Radio Astronomy Observatory. So in this paper. we performed development of the high speed digitizing sampler, the circular memory buffer, and the correlator module for the 400MHz wide-band digital autocorrelator.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.11-18
• /
• 2021

The small radio frequency tracking radar is a tracking system with a radio frequency sensor that identifies a target through all-weather radio frequency signal processing for a target and searches, detects and tracks the target for the major target. In this paper, we describe the development of a board equipped with TMS320C6678 and XILINX FPGA (Field Programmable Gate Array), a high-speed multi-core DSP that acquires target information through all-weather radio frequency and identifies a target through real-time signal processing. We propose DSP-FPGA combination architecture for DSP and FPGA selection and signal processing, and also explain the design of SRIO for high-speed data transmission.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.638-640
• /
• 1996

This paper presents microprocessor-based Digital Position Detection Unit using the inductive radio line and the antennas in train signaling system. This comprises the Fail-Safe system due to the dual controlled system to drive with safe-side even in events of faults, and designs the FSC(failure safe comparator). And the method of Markov Modeling is described for the reliability evaluation of system.