• 한국전자통신학회논문지
• /
• 제13권3호
• /
• pp.587-592
• /
• 2018

위상 배열 안테나를 이용한 적응형 빔 형성 시스템은 간섭신호가 있는 통신환경에 적응형으로 빔을 형성하여 통신 품질을 향상시킨다. 적응형 빔 형성을 위해서는 위상 배열 안테나의 각 방사소자에 급전되는 신호의 위상을 우수한 조합을 산출해야 한다. 본 논문에서는 우수한 위상 천이 조합 산출 확률을 증가시키기 위해, 개치 밀도에 따른 재확산 절차가 추가된 개선된 개체 군집 최적화 알고리즘을 제안하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1780-1785
• /
• 2015

In this paper, the adaptive particle swarm optimization (APSO) algorithm is employed to design a gain-enhanced antenna with a reflector for energy harvesting. We placed the reflector below the main radiating element. Its back-radiated field is reflected and added to the forward radiated field, which could increase the antenna gain. We adopt the adaptive particle swarm optimization (APSO) algorithm, which improves the speed of convergence with a high frequency solver. The result shows that performance of the optimized design successfully satisfied the design goal of the frequency band, gain and axial ratio.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.14-20
• /
• 1998

The resistive shunting for the fine control of a Direct Energy Transfer(DET) systems is fully developed, but the non-resistive shunting using variable size solar array segments is in progress. This paper presents the spacecraft power control through switching of solar array segments, which uses a fully regulated DET power regulation. This method eliminates a dissipative element and removes the associated design limitations which arise from the dissipative elements for radiating cooling in deep space. The switching shunt regulator comprises the switched Solar Array Shunt(SAS) modules that regulate the solar array power. These SAS modules connect/disconnect the solar array segments to/from the bus according to the loading in the main bus without significant variations in the dissipation level. In this paper, twelve segments are used in the shunting. In order to verify the basis of analysis, the computational result of an analytic loop gain is performed.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.78-86
• /
• 1996

Solid-state devices can be directly integrated with a planar antenna to form active antenna elements. In this paper, the voltage controlled oscillator (VCO) is designed and fabricated at 2.4 to 2.5 GHz using a microstrip patch antenna. A varactor diode is used as avariable reactance. The predicted frequency tuning range of the VCO is 2.448 to 2.498 GHz in the design procedure and the fabricated VCO has 2.446 to 2.498 GHz frequency tuning range when the varactor tuning voltage is varied from 0 to 11V. Transmitted power output of the patch antenna which serves both as a rsonator and a radiating element for VCO is about 18 mW over this tuning range.

• ETRI Journal
• /
• 제34권5호
• /
• pp.767-770
• /
• 2012

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual-feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are $28mm{\times}28mm{\times}4mm$, which is the most compact size among the dual-band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).

• 한국전자파학회논문지
• /
• 제10권5호
• /
• pp.738-746
• /
• 1999

본 논문은 10GHz 에서 동작하는 마이크로스트립 $18\times2$ 이중 빔 배열 안테나를 설계 하였다. 단일 복사 소자는 개구면 결합형 패치를 사용하였으며, 이를 전송선 모델을 이용하여 해석 하였다. 급전선은 Side Lobe Level(SLL)를 줄이기 위해 tapered 직-병렬 구조를 사용하였다. 또한 45도에서 이중 빔을 갖게 하기 위해 소자간에 180도 위상차를 주었다. 그 결과 SLL은 25dB를 가지며, $\pm44.5$도에서 두개의 빔을 갖게 되며 8도의 좁은 빔폭을 갖는다.

• 한국통신학회논문지
• /
• 제5권1호
• /
• pp.76-82
• /
• 1980

任意의 形態를 갖는 線形 안테나를 여러 區間으로 나누어 이를 moment 法에 의한 數値解析을 하므로서 旣存 유기 기전력 방법이나 retrarded potential method 보다 실제에 가까운 電流分布를 용이하게 얻을 수 있는 式을 유도하였다. 이 결과를 利用하여 三素子 yagi 안테나에 適用하여 電流分布와 射패턴이 旣存文獻의 理論値와 잘 일치할 수 있음을 보였다.

• ETRI Journal
• /
• 제32권4호
• /
• pp.610-613
• /
• 2010

This letter presents the design of a novel multiband USB dongle antenna with a compact ground plane. The radiating patch is composed of a modified meander-line monopole and a shorted loop to generate a dual-broadband resonance. The proposed antenna supports WiBro, Bluetooth, WLAN, WiMAX, and S-DMB services. The total dimensions of the fabricated antenna are 10 mm ${\times}$ 45 mm ${\times}$ 1 mm, the most compact size among multiband USB dongle antennas reported to date. The measured 10 dB reflection loss bandwidths are 20.8% (2.24 GHz to 2.76 GHz) and 20.2% (4.86 GHz to 5.95 GHz). The measured peak gain is 2.97 dBi, and efficiency is higher than 58%. In addition, the radiation pattern approximates an omnidirectional pattern.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.23-28
• /
• 2014

In this paper, we discuss on the optimal design scheme of the bilayer OLED (Organic Light Emitting Diodes) with micro-cavity structure. We carried out the optical simulation on the OLED device and calculated optimal scale of devices with taking the micro-cavity effect into account. Our emission model is based upon an ensemble of radiating dipole antennas. Consequently, we applied Maxwell's equation to this sequence, followed by the analysis on the electrical behaviors of OLED device using Poisson's equation. It contains carrier injection and transportation mechanism. In this process, we found out the thickness of each layer can affect the recombination rate at the emission layer. Therefore, we optimized the thickness of each layer to improve the efficiency of the device.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1078-1082
• /
• 2001

An alternative formulation of the Helmholtz integral equation is derived to express the pressure field explicitly in terms of the velocity vector of a radiating surface. This formulation, derived for arbitrary sources, is similar in form to the Rayleigh's formula for planar sources. Because the pressure field is expressed explicitly as a surface integral of the particle velocity, which can be implemented numerically using standard Gaussian quadratures, there is no need to use Boundary element method to solve a set of simultaneous equations for the surface pressure at the discretized nodes. Furthermore the non-uniqueness problem inherent in methods based on Helmholtz integral equation is avoided. Validation of this formulation is demonstrated for some simple geometries.