• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.223-227
• /
• 2009

The study presents two measurement split-plot models with a restricted randomization to save cost and time. Split-plot models are used to handle HTCM (Hard To Control Measurement) factors such as high temperature and long-time catalyst control. The models developed are represented by the processes for estimating the measurement precisions, that is, gauge R&R. The study also introduces three-step procedures to indentify resolution, improve R&R reduction, and evaluate the precision effect.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.649-657
• /
• 2009

The paper presents the measurement split split-plot models for saving the time and cost. The split split-plot designs developed are efficiently used to estimating the gauge R&R(Reproducibility & Repeatability) when the completely randomized design of all factors(such as high pressure and temperature) is expensive and time consuming. The models studied include three split split-plots considering the type of experimental units.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.480-488
• /
• 2016

Soil microbes are widely well known to play an important role for sustainable agriculture in terms of crop healthy cultivation and environmental conservation. In this context, the distributional characteristics of soil microbes according to cropping systems were investigated under rice (R)-rice (R), rice (R)-barley (B)-rice (R), and soybean (S)-barley (B)-soybean (S) cropping condition to get basic informations for sustainable agriculture, where barley was grown for winter, in mid-mountainous loam paddy located at the altitude of 285 m above sea level in Sangju area from 2014 to 2015. Estimating from microbial communities by fatty acid methyl ester (FAME) method, a total biomass of bacteria, actinomycetes, and fungi in R-B-R plot was 37% and 40% higher than that in S-B-S and R-R plots, respectively (p < 0.05). In especial, bacteria and fungi were more in R-B-R plot than those in any other ones. B. japonicum, AMF, and mesophilic Bacillus sp. were also greater in S-B-S plot than those. In the community distribution, however, bacteria and actinomycetes showed comparatively high values in S-B-S plot relative to either R-R or R-B-R plot including rice, in which fungi outstanding. In the correlation between microbial biomass and soil properties changed by the cropping, bacteria was positively correlated with C:N ratio; actinomycetes with exchangeable Ca; fungi with available $P_2O_5$ (p < 0.05). While these microbes showed negative response to water stable aggregates of soil.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.8
• /
• pp.698-706
• /
• 2004

Heat transfer coefficients of enhanced tubes in a flooded evaporator are measured through Wilson Plot method. And the correlations are proposed to design a flooded evaporators. Overall heat transfer coefficients are composed of the heat transfer coefficients both inside and outside tubes. Usually the experiments have been conducted separately. But there have been many difficulties like setting up the equipments and measuring the wall temperature. Wilson Plot method makes it possible to measure the separated transfer coefficients at the same equipment through experimental skills. So the cost and time can be reduced. And the results are reliable enough to use for design. Heat transfer coefficients inside the tube were able to be correlated uniquely in spite of various outside conditions. Boiling heat transfer of R134a is more dependent on the saturation temperature and much higher than that of R123.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2009.10a
• /
• pp.33-39
• /
• 2009

본 연구에서는 현장에서 6 시그마를 활용 시 통계분석의 기초가 되는 초기 데이터 분석에 대한 고찰이다. 통계의 가장 기본이 되는 데이터가 잘못되었으면 나머지 모두 문제가 된다. 이에 데이터 초기에 발생할 수 있는 여러 오류의 가능성을 살펴보고 각각에 대해 해결책을 제시하였다. 여기서 활용하는 방법들은 계측기 선정, Gage R&R, Histogram, Box-plot, PDF, Box-Cox 변화 등이다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.580-584
• /
• 2008

Second-order rate constants (kN) have been measured spectrophotometrically for reactions of Y-substituted phenyl benzoates (1a-h) with azide ion (N3) in 80 mol % H2O/20 mol % DMSO at 25.0 0.1 oC. The Brnsted-type plot for the azidolysis exhibits a downward curvature, i.e., the slope (b lg) changes from 0.97 to 0.20 as the basicity of the leaving group decreases. The pKao (defined as the pKa at the center of the Brnsted curvature) is 4.8, which is practically identical to the pKa of the conjugate acid of N3 ion (4.73). Hammett plots correlated with s o and s constants exhibit highly scattered points for the azidolysis. On the contrary, the corresponding Yukawa-Tsuno plot results in an excellent linear correlation with r = 2.45 and r = 0.40, indicating that the leaving group departs in the rate-determining step. The curved Brnsted-type plot has been interpreted as a change in the rate-determining step in a stepwise mechanism. The microscopic rate constants (k1 and k2/k1 ratio) have been calculated for the azidolysis and found to be consistent with the proposed mechanism.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.270-275
• /
• 2000

In this study, heat transfer and Pressure drop characteristics for R-718 in the plate and shell heat exchanger (P&SHE) investigated experimentally. The plates are circular and welded into a stack which fits into a cylindrical shell in P&SHE. Although apparently very different from rectangular the compact brazed plate heat exchanger (CBE), the underlying flow passage structure through the P&SHE is the same as in the CBE. The R-718 between plate side and shell side was performed a counterflow heat exchange. Heat transfer characteristic of R-718 were measured for turbulent flow in P&SHE by using wilson plot technique. Heat transfer experiment Ivas performed in the $200{\leq}Re{\leq}500$ regime and Pressure drop experiment was performed in the $150{\leq}Re{\leq}1600$ regime. The purpose of this study is to investigate heat transfer and friction factor correlations for R-718 in P&SHE and to offer fundamental data for experiment

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.218-223
• /
• 1996

This experiment was carried out to investigate the effect of planting date and planting density on yield and yield components of Fritillariae bulbus from 1989 to 1991. The Chungbuk local variety was used, and the experimental materials were planted six times with 10 days interval from Aug. 20 to Oct. 10. 33, 22, 17 and 13 bulbs were planted by the square meter, respectively. The compound fertilizer for garlic $(N\;-\;P_2O\;-\;K_2O_5=9\;-\;14\;-\;10)$ was applied by 80kgs to the 0.1ha before planting. The experimental design was randomized block design with 3 replications. As the planting dates were earlier, the emerging dates were earlier, too. But the delay of 50 days in the planting affected to the delay of 14 days in the em­erging dates. The plant height was 22.7cms in the Aug. 20 plot. As the planting were later, the plant heights were shorter by $2.4{\sim}5.6cms$ than that. As compared with the 829kgs by the 0.1ha of Aug. 30 plot, the others recorded 1 percent increase in the Aug. 20 plot, 4 percent decrease in the Sep. 10 plot, 26 percent decrease in the Sep. 20 plot, 35 percent decrease in the Sep 30 plot, and 38 percent decrease in the Oct. 10 plot. So, the suitable planting dates were from Aug. 20 to Aug. 30.The emerging date of 33 bulb plot by the square meter was March 7, but as the planting densities were sparse, the emerging dates delayed by one to three days. The plant height of the 33 bulb plot by the square meter was 21. 8cms, but the other plots were short by $0.7{\sim}1.8cms$. The number of shoots of the 33 bulb plot by the square meter was 6.1. but the other plots recorded 0.4 increase in the 22 bulb plot, 0.6 increase in the 17 bulb plot and 0.5 increase in the 13 bulb plot compared with that of the 33 bulb plot. Accordingly, the number of shoots in the sparse planting plot was more than that in the dense planting plot. As compared with the 854kgs by the 0.1ha of the 22 bulb plot, the other plots recored 2 percent in­crease in the 33 bulb plot, 16 percent decrease in the 17 bulb plot and 34 percent decrease in the 13 bulb plot. All things considered, for the culture of Fritillaria thungergii MIQUEL in the middle region, Aug. 25 and 22 bulbs by the square meter were suitable for the planting date and density.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2036-2040
• /
• 2013

Reactions of 4-nitrophenyl 2-thiophenecarboxylate (1a-e) with $R_2NH/R_2NH{_2}^+$ in 20 mol % DMSO (aq) have been studied kinetically. The $2^{nd}$ order kinetics, ${\beta}_{nuc}$ = 0.88-0.98, and linear Hammett and Yukawa-Tsuno plots observed for these reactions indicate an addition-elimination mechanism in which the $2^{nd}$ step is rate limiting. The ${\beta}_{nuc}$ value increased with a stronger electron-withdrawing 5-thienyl substituent, the Hammett plots are linear except for X = MeO, and Yukawa-Tsuno plots are linear with ${\rho}$ = 0.79-1.32 and r = 0.28-0.93, respectively. The ${\rho}$ value increased and r value decreased with a stronger nucleophile, indicating an increase in the electron density at the C=O bond and a decrease in the resonance demand. These results have been interpreted with enhanced N-C bond formation in the transition state with the reactivity increase.

• Communications for Statistical Applications and Methods
• /
• v.28 no.4
• /
• pp.369-391
• /
• 2021

The vlda is an R (R Development Core team et al., 2011) package which provides functions for visualization of multidimensional longitudinal data. In particular, the R package vlda was developed to assist in producing a plot that more effectively expresses changes over time for two different types (long format and wide format) and uses a consistent calling scheme for longitudinal data. The main features of this package allow us to identify the relationship between categories and objects using an indicator matrix with object information, as well as to cluster objects. The R package vlda can be used to understand trends in observations over time in addition to identifying relative relationships at a simple visualization level. It also offers a new interactive implementation to perform additional interpretation, therefore it is useful for longitudinal data visual analysis. Due to the synergistic relationship between the existing VLDA plot and interactive features, the user is empowered by a refined observe the visual aspects of the VLDA plot layout. Furthermore, it allows the projection of supplementary information (supplementary objects and variables) that often occurs in longitudinal data of graphs. In this study, practical examples are provided to highlight the implemented methods of real applications.