• 산업클러스터
• /
• 제4권1호
• /
• pp.14-50
• /
• 2010

서울시 서초구 산업클러스터 경쟁력을 분석하기 위해 계량분석과 역량분석을 실시하였다. 사업체수, 종사자수, GRDP 추계(전국, 서울시, 서초구, 양재동) 등 주요 산업경제지표를 계량분석하였고 LQ지수를 통한 클러스터 집적도를 연도별로 분석하였다. 서초구와 양재동 R&D 클러스터의 산업별 특징을 분석하였고 R&D 관련 산업구조 분석을 하였다. 그리고 입지여건, 비즈니스 여건, 산업잠재력의 역량을 SWOT 분석하였다. 연구분석한 자료를 종합적으로 분석하여 보면 다음과 같은 결론을 제시할 수 있다. 서초구 및 양재지역은 국내 최고의 R&D 클러스터의 인프라와 산업발전 역량을 보유하고 있는 것으로 분석되었다. 첫째, 서초와 양재지역은 R&D 관련 산업과 인력인프라가 매우 우수한 것으로 분석되었다. 둘째, R&D 관련 산업의 발전 잠재력 분석에서도 우수한 것으로 분석결과로 나타났다. 이는 서울시 4대전략산업의 R&D 관련 산업과도 가치사슬로 잘 연계되어 있다. 서초구 및 양재지역은 국내 최고의 R&D 클러스터의 인프라와 산업발전 역량을 보유하고 있다. 셋째, R&D 관련 산업 연구자수 발전잠재력 분석에서도 양재지역이 우수한 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.262-263
• /
• 2011

Flexible electronics, a future technology of electronics, require a low cost integrated circuit that can be built on various types of the flexible substrates. As a potential candidate for this application, a single walled carbon nanotube network is studied as an active device with a scheme of thin film transistor. Transistors are formed on a plastic foil by the Roll-to-Roll (R2R) and the Roll-to-Device (R2D) printing method. For both printing methods, electrical transports for the transistors are presented with the temperature dependence of threshold voltage (V_Th) and mobility from the measured transfer curves at temperatures ranging from 10 K to 300 K. It is observed that ${\mu}=0.044cm^2/V{\cdot}sec$ and V_Th=7.28V for R2R and ${\mu}=0.025cm^2/V{\cdot}sec$ and V_Th=3.10V for R2D, both for the temperature at 300K. Temperature dependence of mobility and V_Th is observed. However for R2R, the temperature dependence of V_Th is constant. It is the difference between, R2R and R2D.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2080-2085
• /
• 2018

There have been numerous studies that extract the R-peak from electrocardiogram (ECG) signals. All of these studies can extract R-peak from ECG. However, these methods are complicated and difficult to implement in a real-time portable ECG device. After filtration choosing a threshold value for R-peak detection is a big challenge. Fixed threshold scheme is sometimes unable to detect low R-peak value and adaptive threshold sometime detect wrong R-peak for more adaptation. In this paper, a simple and robustness algorithm is proposed to detect R-peak with less complexity. This method also solves the problem of threshold value selection. Using the adaptive filter, the baseline drift can be removed from ECG signal. After filtration, an appropriate threshold value is automatically chosen by using the minimum and maximum value of an ECG signals. Then the neighborhood searching scheme is applied under threshold value to detect R-peak from ECG signals. Proposed method improves the detection and accuracy rate of R-peak detection. After R-peak detection, we calculate heart rate to know the heart condition.

• 대한간호학회지
• /
• 제34권7호
• /
• pp.1184-1193
• /
• 2004

Purpose: The purpose of this study was to explore the relationship of uncertainty, hope and quality of life in patients with breast cancer. Method: The subjects of the study were 113 breast cancer patients treated at 3 university hospitals in Daegu and Busan from June 1 to September 30, 2003. Uncertainty was measured by the Mishel Uncertainty in Il1ness Scale (MUIS), Hope was measured by Nowotny's Hope Scale, and quality of life by Ro's Korean Quality of Life(QOL). Data was analyzed with the SPSS program by t-test, ANOVA, Spearman's rank correlation and Multiple Regression Analysis. Result: The scores of uncertainty were negatively correlated with hope and QOL(all p's<0.05). Uncertainty revealed that there was a negative correlation among subitems of hope such as confidence, relationship with others, possibility of future, and inner motivation(r=-.333, p=.000; r=-.230, p=.015; r=-.260, p=.006; r=-.291, p=.003). Uncertainty also showed a negative correlation among subitems of QOL such as emotional status, self esteem, and relationship with family(r=-.29, p=.004; r=-.326, p=.000; r=-.197, p=.044), whereas hope revealed a positive correlation among subitems of QOL such as emotional status, self esteem, relationship with neighbor, and relationship with family(r=.243, p=.011; r=.487, p=.000; r=.29, p=.001; r=.29, p=.001). The score of uncertainty was low in graduate school students and subjects using problem solving as a coping method. However, the score of hope was high in college students and subjects using a problem solving method, and the score of QOL was high in professionals. Conclusion: Based on the study results, breast cancer patients experienced living with uncertainty and maintaining hope. Thus the study's findings can be useful in directing a comprehensive nursing care plan to improve QOL of breast cancer patients.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2331-2338
• /
• 1994

Experimental conditions of the optical shadow methods of caustics for measurement of the stress intensity factor and the J-integral in various materials(polycarbonate, PMMA, Al 5586D) are investigated. The necessary experimental requirements toe determine accurate values of the stress intensity factors and the J-integrals are described. The ratio of $r_o$ (radius of initial curve) to $r_p$ (plastic zone size) is selected as a parameter to verify the experimental limitation of the method of caustics in determination of fracture parameters. In this study, transmission caustics method was used for compact tension specimens made of polycarbonate and PMMA. while reflection caustics method was applied to c-shaped tension specimen made of Al 5586D. The appropriate ranges of $r_o/r_p$ tp determine accurate values of stress intensity factors were found to be 1.5~1.8. Existing experimental results have been obtained mainly by changing $r_p$ with different loads in $r_o/r_p$. However, in this study we could obtain varying $K_{caus}/K_{th}$ over the wide range of $r_o/r_p$ at fixed load conditions with newly designed optical arrangement. Thus, we could find the range in which theoretical and experimental results agree well each other by changing $r_o$ values only. In Al 5586D specimen, experimental caustics were located inside of the plastic zone, and $K_{caus}/K_{th}$ were found to be not unity in this range. It is found that $J_{caus}/J_{th}=1{\;}with{\;}r_o/t{\geq}0.8$ and the experimental plastic zone includes the contours of caustics.

• 한국식품과학회지
• /
• 제35권3호
• /
• pp.470-474
• /
• 2003

식중독은 세균에 의한 발병이 대부분이다. 따라서 식품에서 식중독 원인균을 신속하게 탐색하게 식중독으로부터의 되면 피해를 줄일 수 있을 것이다. 고전적인 식중독 원인균 탐색은 증균, 선택적 배지를 이용한 isolation, 생화학적 특징을 활용하는 분석이 있으나 많은 시간이 소요되는 단점을 갖고 있었다. 본 연구는 16S rRNA gene(16S rDNA)로부터 얻은 DNA 염기 서열을 이용 식중독 원인균의 특이적 oligonucleotide probe을 제작 reverse dot blot hybridization과 PCR 방법을 이용하여 고전적인 방법보다 빠른 시간 내에 식품에서 원인균을 탐색 할 수 있었다. 우유를 인공적으로 본 연구에서 사용한 균주로 오염시킨 후 DNA를 추출하여 PCR 증폭산물과 oligonucleotide probe를 hybridization 시킨 결과 oligonucleotide probe를 hybridization 시킨 결과 oligonucleotide probe가 위치한 곳에서 발색 반응이 나타났다. 본 연구에서 본 연구를 통해 DNA microchip으로 활용 짧은 시간 내에 많은 종류의 식중독 원인균을 탐색 할 수 있는 가능성을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.84.2-84.2
• /
• 2010

PEMS (printed electro-mechanical system) is fabricated by means of various printing technologies. Passive and active components in 2D or 3D such as conducting lines, resistors, capacitors, inductors and TFT, which are printed with functional materials, can be classified in this category. And the issue of PEMS is applied to a R2R process in the manufacturing process. In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem: it is difficult to apply toa continuous process as a R2R printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, anelectrostatic atomizer sprays micro-drops from the solution injected into the capillary, with electrostatic force generated by electric potential of about tens of kV. ESD method is usable in the thin film coating process of organic materials and continuous process as a R2R manufacturing process. Therefore, we experiment the thin films forming of PEDOT:PSS layer and Active layer which consist of the P3HT:PCBM. The result of experiment, organic solar cell using ESD thin film coated method is occurred efficiency of about 1.4%. Also, the case of only used to ESD method in the active layer coating is occurred efficiency of about 1.86% as the applying a spin coating in the PEDOT:PSS layer. We can expect that ESD method is possible for continuous process to manufacture in the organic solar cell or OLED device.

• 한국환경농학회지
• /
• 제39권2호
• /
• pp.142-169
• /
• 2020

BACKGROUND: A new analytical method has been developed to determine 261 pesticide residues in herbal medicines. METHODS AND RESULTS: The extraction of pesticides was carried out by modified method of the Korea Food Standards Codex sample extraction and determination was performed using GC-MS/MS and LC-MS/MS. During the pre-treatment process of the test method, Solid-liquid separation was changed to centrifugation. The method was validated by the precision and accuracy results. 261 pesticides spiked at three level 20, 50, 100 ug/kg in herbal medicines. The limit of quantification of method were 4-40 ug/kg for GC-MS/MS and 2-45 ug/kg for LC-MS/MS, respectively. Among the pesticides analysed by GC-MS/MS and LC-MS/MS, 244 pesticides (94% of total number) in chinese matrimony vine and 224 pesticides (86% of total number) in korean angelica root and 231 pesticides (89% of total number) in jujube and 214 (82% of total number) in cnidium showed recoveries in the range of 70-120% with RSD⪯20%. CONCLUSION: These results indicated that GC-MS/MS and LC-MS/MS analysis with the sample extraction in this study can be applied to multi-residue analysis of pesticides in herbal medicines.

• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.1-9
• /
• 2000

미세구조 N-채널 MOSFET의 게이트-소스 전압에 의존하는 유효 채널 캐리어 이동도와 소스 및 드레인 기생저항의 정확한 분리 추출을 위해서 새로운 ERM-방법을 제안하였다. ERM-방법은 선형영역에서 동작하는 게이트 길이가 다른 두개의 소자($W_m/L_m=30{\mu}m/0.6{\mu}m, 30{\mu}m/1{mu}m$)에 적용되었고 유효 채널 캐리어 이동도를 모델링하고 추출하는 과정에서 게이트-소스 전압에 의존하는 소스 및 드레인 기생저항의 영향을 고려하였다. ERM-방법으로 추출된 특성변수들을 사용한 해석적 모델식과 소자의 측정데이터를 비교해본 결과 오차가 거의 없이 일치하는 것을 확인하였다. 따라서, ERM-방법을 사용하면 대칭구조 및 비대칭구조 소자의 유효 채널 캐리어 이동도, 소스 및 드레인 기생저항과 다른 특성변수들을 정확하고 효율적으로 추출할 수 있을 것으로 기대된다.

• 한국식품영양학회지
• /
• 제32권2호
• /
• pp.148-154
• /
• 2019

The aim of this study was to select compounds for the standardization of fermented Kalopanax pictus Nakai (KP-F), to develop the analysis method using HPLC-PDA and to perform method validation. KP-F is a fermented powder developed to improve the original physiological activities and create a new functionality. Eleutheroside E, Acanthoside B, and Syringaresinol were selected as the standard compounds and developed our own method for simultaneous analysis. The analyte was isolated using C18 column with a gradient elution of 0.05 M phosphoric acid in water and methanol as the mobile phase at a flow rate of 1 mL/min and detected at 210 nm. As a result, all standard compounds showed good linearity with an $R^2$ (coefficient of correlation) of 1.000 and for the limit of detection range of $0.710{\sim}0.831{\mu}g/mL$, and the limit of quantification as $2.150{\sim}2.520{\mu}g/mL$. The precision was RSD (%) of less than 4.80%, while the accuracy was 4.70%>RSD (%) for the range 102.44~110.48%. In conclusion, the developed analysis method is suitable for the detection of Eleutheroside E, Acanthoside B, and Syringaresinol in KP-F.