• International Journal of Advanced Culture Technology
• /
• v.7 no.3
• /
• pp.97-102
• /
• 2019

This study suggests a solution of an incentive system from the viewpoint of the external effect on the renting of firefighting qualifications and on rental agencies. Currently, the Human Resources Development Service of Korea does not have a penalty for neglecting to perform a search into qualification lending and rental agencies. In the short term, the penal clause should be strengthened so that companies and qualification holders cannot borrow or lend their qualifications. In addition, the Human Resources Development Service of Korea will increase the number of personnel dedicated to investigating the loaning of qualifications. It is necessary for the government to establish a penalty for neglecting to investigate the lending of qualifications for the Human Resources Development Service of Korea. In the long term, the state needs to make only minimal regulations. Also, the state needs to make companies and qualification holders feel like they benefit more when they are not borrowing or lending qualifications. The anticipated effect of this study is that the government will intervene appropriately by applying firefighting qualifications according to market principles. It can also be used as a basis for the revision of related laws on the renting of national technical qualification certificates and the investigation of rental agencies.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.195-204
• /
• 2019

In this paper, we propose the way to solve the problems of current college of education at university that they are running a curriculum that is insufficient for immediate application to the school. So, we analyzed the application of capstone design which is proven to be effective in various fields, and constructed a curriculum for the development of educational materials to improve the teacher's qualification in the college of education and applied them to the preliminary informatics teachers. As a result, we confirmed that the development class of educational materials based on capstone design is positive for the change of awareness about informatics teacher's qualification, and also confirmed that the students' satisfaction level about class is higher. Based on the results, we discussed the effects of applying capstone design to the college of education. The conclusions are as follows: First, it helps students to improve the teacher's qualification. Second, it is a curriculum that can fill the shortage of student teaching. Third, the curriculum is an effective curriculum for the recognition of the student who is in charge of evaluation, and the teacher who is in charge of the evaluation. Fourth, Capstone design information textbook study class is a method of greatly improving class satisfaction compared to lecture class.

• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.49-64
• /
• 2020

Photovoltaic and Thermal collector (PV/T) systems are renewable energy devices that can produce electricity and heat energy simultaneously using solar panels and heat exchangers. Since PV/T systems are exposed to the outdoors, their reliability is affected by various environmental factors. This paper presents a reliability test for a PV/T system and evaluates the test results. The reliability assessment entails performance, environment, safety, and life tests. The factor that had the greatest influence on the life of the system was the hydraulic pressure applied to the heat exchanger. A test was conducted by repeatedly applying pressure to the PV/T system, and a reliability analysis was conducted based on the test results. As a result, the shape parameter (β) value of 5.6658 and the B10life 308,577 cycles at the lower 95% confidence interval were obtained.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2509-2522
• /
• 2021

A valve assembly used in nuclear power plants must be qualified and supervised. New technical standards such as ASME QME-1 2007 particularly require detailed qualification using experiment and analysis. Particularly, diagnostic tests and engineering studies are required for qualification of ASME QME-1 2007. Among these studies, the research on the measurement of friction coefficient and packing stress is important. The irregular change of packing stress along the stroke distance occurs because of the abnormal phenomenon, which must be found and studied with quantitative methods. Packing stress should be analyzed conservatively through experimentation and analysis. In this study, various formulas were applied to measure and calculate coefficient of friction and packing stress. This study can be used in relation to qualification and supervision of packing materials. And the calculation using static diagnosis test can be used to find the packing frictional force in dynamic diagnosis test with flow pressure in a pipe. This study has made it possible to reliably consider packing frictional force generated in a valve body. And so, it is believed that more margin can be secured when evaluating the capacity of valve actuator by applying the accurate frictional force generated in the valve assembly.

• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.355-360
• /
• 2011

This paper is a study on a nuclear water chiller. It presents a test-verified finite element model of a water chiller to be used at a Nuclear Power Plant. The test-verified model predicts natural frequencies within 5% for all major modes below 50 Hz. This model accurately represents the dynamic characteristics of the actual hardware and is qualified for its use in the final stress analysis for seismic verification.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.3
• /
• pp.12-17
• /
• 2020

Avionics is a compound word of aviation and electronics that began to be used in the late 1930s. In the components or sub-systems installed to the aircraft, avionics is something that works by electronic technology. In the past, the aircraft mate, the flight engineer, and the radar operators performed the work on board the aircraft but the modern aircraft have replaced these tasks with avionics. the aircraft mechanics who maintain and manage such complex aircraft must have expertise and technics with the development of avionics to maintain aircraft airworthiness. This paper is about the introduction of domestic avionics qualification system and the development of avionics maintenance technology. For this, the SWOT analysis is performed by identifying the internal and external environment. And recommend the strategy and direction of domestic avionics qualification and education system.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.1-4
• /
• 2015

Qualification includes all activities to demonstrate that a product meets and exceeds the reliability goals. Manufacturers need to spend time and resources for the qualification processes under the pressure of reducing time to market, as well as offering a competitive price. Failure to qualify a product could result in economic loss such as warranty and recall claims and the manufacturer could lose the reputation in the market. In order to provide valid and reliable qualification results, manufacturers are required to make extra effort based on the operational and environmental characteristics of the product. This paper discusses optimal interval censoring design for reliability prediction of electronic packages under limited time and resources. This design should provide more accurate assessment of package capability and thus deliver better reliability prediction.

• Journal of Technologic Dentistry
• /
• v.20 no.1
• /
• pp.13-19
• /
• 1998

This study was performed to identify the current problem of The National Qualification Examination for Dental Technician and to provide suggestion for improvement of The National Qualification Examination System. This study was based on the questionaries answered by the professors in the department of dental technology of college and the members of Korea dental technician's society. The result could be summarized in the following. 1. The examination should be held not only in Seoul but in other areas simultaneously. 2. Prepartation of The National Qualification Examination should be entrusted to a committee composed of selected members of The Korea Dental Technician Association and selected members of professors in the department of dental technology. 3. The carrving practical examination should be continued and the method of grading should be change to ensure fairness, objectivity and balance. Specially colored wax can be used to prevent cheating in test. 4. The examination on the subject of "The Introduction Dental Anatomy" should be different for dental technicians and dental hygienists. And the subjects need to be divided into "Dental Morphology" and "Oral Anatomy".

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1-5
• /
• 2010

The Hyundai Rotem company is due to be conducted the main line Speed Qualification Test as regulated by CFR for SEPTA EMU and SCRRA Bi-level coach project. The regulated test items per 49CFR213.345 are wheel/rail interaction forces and carbody/truck accelerations during running on main line. Therefore the special two sets of instrumented wheelset (IWS) per each project have been made for measuring the interaction forces between wheel and rail at four wheels of one truck during running on main line. In this paper, regarding Speed Qualification Test, the required test items and data analysis method per 49CFR213.345 and the preparation status of instrumented wheelsets (IWS) are introduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.193-196
• /
• 2007

We developed and tested the high pressure hydrogen gas cylinder(type4) for fuel cell vehicle. The working pressure is 350bar. We conducted material tests, production tests and design qualification tests on the developed cylinders according to modified NGV2-2000(hydrogen). The high pressure hydrogen gas cylinder met all the design qualification requirements of ANSI/CSA NGV2-2000 and acquired NGV2 certification from independent inspection agency.