• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.217-220
• /
• 2003

In the case of the remediation studies, push pull test is a more time and cost effective mettled than multi-well tracer test. It also gives Just as much or more information than the traditionally used methods. But the data analysis for the hydraulic parameters, there have been some defections such as underestimation of dispersivity, requirement for effective porosity, and calculation of recovery of center of mass to estimate linear velocity. In this research, Weibull distribution function is proposed to estimate the center of mass of breakthrough curve for Push pull test. The hydraulic parameter estimation using Weibull function showed more exact values of center of mass than those of exponential regression for field test data.

• The Journal of Information Systems
• /
• v.30 no.4
• /
• pp.71-94
• /
• 2021

Purpose The purpose of this study is to verify impacts of factors, representing Push-Pull-Mooring(PPM) on switch intention to OTT(Over-The-Top) service in demand for content and to find relationship between factors through empirical analysis. Design/methodology/approach This study designed a research model by deriving factors affecting the intention to switch on OTT service based on the Push-Pull-Mooring framework and researches on OTT service. To test the hypothesis, a total of 357 responses were collected from individuals with experience in using OTT service and analyzed using SPSS26 and SmartPLS3.0. Findings According to the empirical analysis result, this study confirmed that the push, pull, and mooring factors proposed in this study had a significant effect on switching intention on OTT service. In addition, this study confirmed that both low switching cost and need for variety had a significant effect except for hypothesis H8.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.39-43
• /
• 2013

It is difficult to feed welding wire stably, when the distance between welding wire feeder and welding torch is far enough. In order to solve this problem, arranging a extension wire feeder between them could be one of useful methods. However, the welding wire could be twisted up in the extension cable between extension and terminal wire feeders in the case that RPM of extension wire feeding motor is higher than that of terminal motor. In this study, feeding problem of normal push-pull wire feeding system occurred at low welding current range less than 250A. In order to solve the problem, two new wire feeding systems of push-pull type were introduced. Welding wire feeding tests were preformed in the range of 150A to 400A with the developed push-pull feeding system. In addition, weldability test was performed at the welding current of 200A, 300A, and 400A. The welding wire twisting problem that was observed in the normal feeding system did not occur in the new push-pull wire feeding system.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.224-239
• /
• 2022

Despite an impressive growth of online sales, the bricks-and-mortar bandwagon still remain high-profile in the realm of consumer channel switching behavior. Different from the existing research exploring the consumer switching behavior from the offline to the online retailer, this study is an effort to investigate why and when do consumers switch from the online to the offline channel by applying the push-pull-mooring framework. Thus, structural equation modeling and SPSS were used to test the established hypotheses. The results, as expected, show that both push factors (i.e., perceived risk and dissatisfaction) and pull factors (alternative attractiveness and perceived ownership) are positively related to a consumer's intention to switch from the online to the offline channel. Moreover, all of expected interactions between push factors and mooring factors (i.e., switching costs, variety seeking, and subjective norms), and between pull factors and mooring factors are supported, except for the interactions between push factors and switching costs as well as between pull factors and subjective norms. Finally, implications and limitations are discussed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.77-82
• /
• 2004

Quantifying rates of microbial processes under subsurface conditions is difficult, and is most commonly approximated by laboratory studies using aquifer materials. In this study a single-well, 'push-pull' test method is adapted for the in situ determination of denitrification rates in groundwater aquifers. The rates of stepwise reduction of nitrate to nitrite, nitrous oxide, and molecular nitrogen were determined by performing a series of push-pull tests at an experimental well field of Korea University. A single Transport Test, one Biostimulation Test, and four Activity Tests were conducted for this study. Transport tests are conducted to evaluate the mobility of solutes used in subsequent tests. These included bromide (a conservative tracer), fumarate (a carbon and/or source), and nitrate (an electron acceptor). At this site, extraction phase breakthrough curves for all solutes were similar, indicating apparent conservative transport of the solutes prior to biostimulation. Biostimulation tests were conducted to stimulate the activity of indigenous heterotrophic denitrifyinc microorganisms. Biostimulation was detected by the simultaneous production of carbon dioxide and nitrite after each injection. Activity tests were conducted to quantify rates of nitrate, nitrite, and nitrous oxide reduction. Estimated zero-order degradation rates decreased in the order nitrate '||'&'||'gt; nitrite '||'&'||'gt; nitrous oxide. The series of push-pull tests developed and field tested in this study should prove useful for conducting rapid, low-cost feasibi1ity assessments for in situ denitrification in nitrate-contaminated aquifers.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.275-277
• /
• 1998

The effect of the coil flux, so called "push/pull effect", is to shift the airgap flux density variation due to the magnet alone by a certain amount. Thrust therefore is shift downward or upward. The push/pull effect was presented through the FEM analysis and static tests. We compared with the thrust obtained through the FEM analysis and static tests.

• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.79-94
• /
• 2019

The purpose of this study is to explore the factors affecting rural experience by applying the unified push-pull-mooring model. The theoretical model is an unified PPM model that introduces new variables based on PPM. The pull factor of the newly introduced variables were reconstructed based on the Schmitt's Experience model and ServQual model. The hypothesis is set as follows. The push factor will have a negative effect on experience satisfaction and the pull factor(experience attributes, service quality)will have a positive effect on experience satisfaction. Also, mooring factors will have a negative effect on experience satisfaction. The research model of this study was tested by structural equation model based on 314 effective questionnaire data. Service quality had a positive effect on experience satisfaction. Mooring factors have a negative effect on experience satisfaction. Push factor and experience attributes factor were analyzed to have a no significance effect on experience satisfaction. These results theoretically test that the mooring factors also have an important effect on the experience satisfaction in the rural experience. Based on the Schmitt's Experience model and ServQual model introduced as a pull factor, the proposed unified PPM model proved to be a useful analysis framework. In practice, it was able to provide implications on what factors should be strategically and marketingly focused to activate the 6th industry experience.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.502-509
• /
• 1998

The scheme to reduce jerking phenomena in one push-pull type trainset was proposed. To simulate the jerking between coaches, dynamic analysis model was made. This model could analyze longitudinal dynamic behavior between locomotives and coaches caused by spring and damping characteristics of couplers and center pivots; characteristic curves of traction and braking. To validate the analysis results, tests were conducted in the same driving and braking condition. Comparison of longitudinal acceleration between simulation and test results shows a good agreement. To minimize the jerking phenomena, lots of dynamic simulations were conducted with varying driving/braking effort curve. From the results of simulations, an efficient and economic way to reduce jerking phenomena was found to be to reduce slope of tractive effort curve and synchronize braking time between locomotives and coaches. Test results show that this way could reduce the jerking Phenomena. To express jerkins Phenomena quantitatively, maximum peak to peak values of acceleration were used.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.1041-1052
• /
• 2018

A single-well push-drift-pull tracer test using two different tracers ($SF_6$ and salt) was performed at the Environmental Impact Test (EIT) site to determine suitable locations for monitoring wells and arrange them prior to artificial $CO_2$ injection and leak tests. Local-scale estimates of hydraulic properties (linear groundwater velocity and effective porosity) were obtained at the study site by the tracer test with two tracers. The mass recovery percentage of the volatile tracer ($SF_6$) was lower than that of the non-volatile tracer (salt) and increased drift time may make degassing of $SF_6$ intensified. The $CO_2$ leakage monitoring results for both unsaturated and saturated zones suggest that the $CO_2$ monitoring points should be located near points at which a high concentration gradient is expected. Based on the estimated hydraulic properties and tracer mass recovery rates, an optimal $CO_2$ monitoring network including boreholes for monitoring the unsaturated zone was constructed at the study site.

• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.162-167
• /
• 2008

To enhance the control efficacy against cockroaches in dwelling space, repellent ("Push") was set down on one comer and a poison bait including attractant ("Pull") was on the opposite side. And we tested the control efficacy of Push-Pull strategy by behavior-stimuli of cockroaches. In a mini-field test, German cockroach males primarily chose shelters nearest to the attractant-treated surfaces and farthest from the repellent-treated surfaces. The consumption of food or bait was also highest from food nearest to the preferred shelters by push-pull effect. We evaluated the push-pull insecticidal efficacies of five essential oils belong to Citrus plant, namely, grapefruit, lemon, lime, orange, and petitgrain. The combined push-pull treatments appeared to be faster and higher insecticidal effects than single (pull) treatment, and the repellent efficacy of Citrus oils was in the order of grapefruit > lemon > lime > orange > petitgrain. Therefore, we propose the effective control of the german cockroach using Citrus oils as repellents and push-pull method into a limited area.