• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.176-182
• /
• 2018

본 연구의 목적은 볼접합부를 갖는 원형강관의 좌굴실험 결과를 토대로 하여 국내외 압축재 설계규준과 비교 평가함으로써 부재의 좌굴내력 및 좌굴길이 계수의 안전성과 합리성을 조사하는 것이다. 좌굴성능 평가를 위해 선정된 원형강관은 Ø$48.6{\times}2.8t$와 Ø$60.5{\times}3.2t$ 및 Ø$76.3{\times}3.2t$이다. 국내외 압축재 설계를 위해 우리나라의 하중저항계수 설계법(LRFD), 일본의 한계상태 설계법(LSD) 및 영국의 BS5950 규준을 적용하였다. 본 연구에서는 선행연구의 실험결과와 국내외 설계규준과의 좌굴성능을 비교 분석하였다. 그 결과를 요약해 보면 다음과 같다. 각국의 압축재 설계규준에서 부재의 전체길이를 좌굴길이로 적용한 결과 실험에 의한 좌굴내력의 64%~89% 정도로 나타났다. 따라서 안전을 위해 현재 설계 규준식에 준하여 부재설계를 수행하는 것이 바람직하다고 판단되었다. 실험결과 측정된 좌굴내력은 우리나라, 일본 및 영국의 압축재 설계규준에서 좌굴길이를 순수 원형강관만으로 고려한 좌굴내력 값에 비해 1.02배~1.43배 높은 것으로 나타났다. 따라서 스페이스 프레임 구조물 설계에 있어 개별부재 좌굴내력은 절점 간 길이가 아닌 순수 원형강관의 길이로 좌굴계수를 고려할 필요가 있을 것으로 보여 진다.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.553-560
• /
• 2021

본 연구에서는 순수시료를 사용한 시멘트 클링커와 석탄재를 7% 적용한 클링커를 1050~1500℃의 온도로 소성하여 소성온도별 시멘트 광물의 함량 변화와 미세구조의 변화를 검토하였다. 시멘트 클링커의 원료로서 석탄재의 적용은 알루미나 및 규산질의 공급원으로 적용이 가능하였으며, 석탄재를 적용한 시멘트 클링커는 1350℃ 이상의 소성온도에서 순수원료를 적용한 시멘트 클링커와 동등 수준의 광물량을 나타내었고, 미세구조 또한 유사한 상태를 나타내어 시멘트 원료로서 석탄재의 활용이 가능함을 확인하였다. XRD-Reitveld 분석에서 1250℃에서 Belite의 최대량이 생성되어 1350℃에서부터 Belite에서 Alite로의 전환이 나타났다. 1350℃에서부터 간극상과 Alite로 추정되는 광물상이 구분되며, 1400℃에서부터 명확하게 구분되었다. 소성온도가 증가함에 따라 결정상의 형상과 경계가 명확해지며, 결정상의 크기도 증가되는 것이 나타났다.

• 대한한의학원전학회지
• /
• 제37권3호
• /
• pp.83-106
• /
• 2024

Objectives : This paper aims to examine the meaning of Shengmaisan in relation to original qi based on the discussion of Zhangyuansu, Lidongyuan and other doctors. Methods : Discussion of Shengmaisan made by Zhang, Li and others were examined. Afterwards, the medicinal properties of renshen, maimendong, and wuweizi as written in the Bencaogangmu, Donguibogam, Benjingshuzheng and texts of Zhang and Li were studied in relation to original qi. Related concepts such as '肺中伏火'·'補肺中元氣不足'·'補天眞元氣'·'夏食寒' were analyzed as well. Results & Conclusions : 1. Various pathology related to deficiency in original qi could act as internal pathogen for Shengmaisan application with which external factors such as summerheat and dampness heat meet results in most damage in the Lung metal. Therefore the upper body Lung is emphasized as pathogen. 2. The pathology of Shengmaisan application is depletion of humor, which should be refined, due to summer or dampness heat in a state of original qi deficiency which damages the Lungs, disabling its function of managing clear and pure qi. 3. The disease pattern for Shengmaisan in relation to original qi, according to other doctors, includes symptoms related to the Lungs such as dryness in the mouth due to excessive perspiration, blankness, loss of consciousness, shortness of breath, coughing, fast breathing, along with general bodily symptoms such as heavy sensation of the body, lethargy, difficulty walking, limping. These general bodily symptoms are due to either qi deficiency of the Lung, or humor deficiency due to failure of qi convergence in the lower body, or symptoms caused by Jing deficiency in severe cases. Symptoms related to problems in the lower body could manifest as dysfunction in urination and defecation, weakness in the limbs caused by original qi deficiency. 4. The Lungs circulate the clear and pure qi, converging qi and creating humor to assist the Triple Burner's Qi-Humor metabolism, enabling smooth communication of original qi throughout the body. With the original qi well tonified, the shen mechanism which is rooted in original qi allows for autonomous and consistent qi circulation within the body. Therefore, both Zhang and Li emphasized the importance of original qi. The property of Shengmaisan is explained as 'supplement qi/create liquid, convergence of yin/stop perspiration'. Zhang and Li explained its property as managing the circulation of original qi, to tonify Lungs' original qi and origin of water-humor.

• Transactions on Electrical and Electronic Materials
• /
• 제15권5호
• /
• pp.241-244
• /
• 2014

Charge trap flash memory capacitors incorporating $(HfO_2)_x(Al_2O_3)_{1-x}$ film, as the charge trapping layer, were fabricated. The effects of the charge trapping layer composition on the memory characteristics were investigated. It is found that the memory window and charge retention performance can be improved by adding Al atoms into pure $HfO_2$; further, the memory capacitor with a $(HfO_2)_{0.9}(Al_2O_3)_{0.1}$ charge trapping layer exhibits optimized memory characteristics even at high temperatures. The results should be attributed to the large band offsets and minimum trap energy levels. Therefore, the $(HfO_2)_{0.9}(Al_2O_3)_{0.1}$ charge trapping layer may be useful in future nonvolatile flash memory device application.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.101-110
• /
• 2015

최근 Hsu는 전단시험장치를 이용해 순수전단이 작용하는 9개 RC패널요소의 전단시험을 수행하였다(ACI 1997). 최신 트러스모델(수정압축장이론, 회전각연성트러스모델)은 평형조건과 적합조건 그리고 2축 상태에서 RC 막판넬의 연성 응력-변형률 관계를 이용하여 2중 루프의 시행착오방법으로 복잡한 비선형해석을 수행하고 있다. 본 연구는 스트럿과 타이의 파괴기준에 기반한 개선된 모어변형적합방법을 사용해 효율적인 알고리즘을 제안하였고, 이 알고리즘을 이용하여 Hsu가 실험한 전단이력 해석을 빠른 수렴속도로 개선한 것이다. 해석결과에 의하면 전단변형률 증폭상태의 전단변형에너지는 주압축 응력-변형률에 크게 지배받는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.132-136
• /
• 2002

$Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)\;(OTf=CF_3SO_3^-)$ readily reacts with various amines to afford cationic amine complexes $[Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(amine)](OTf)\;(amine=NH_3,\;NHMe_2,\;NHC_4H_8,\;NH_2Ph,\;NH_2(Tol-p))$ in high yields. These complexes have been fully characterized by IR, $^1H-,\;^{19}F{^1H}-,\;and\;^{31}P{^1H}-NMR$ spectroscopy, and elemental analyses. Reaction of $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)$ with acrylonitrile quantitatively produced the ${\pi}$-olefinic complex $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(CH_2=CHCN)](OTf)$ which is only stable in solution in the presence of acrylonitrile. Attempt at isolating this complex in the pure solid state was failed due to partial decomposition into $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)$ The equilibrium constants $(K_{eq}=[Pt(PCP)-(NH_2R)^+][CH_2=CHCN]/[Pt(PCP)(CH_2=CHCN)^+][NH_2R]:\;[Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(CH_2=CHCN)]^++NH_2R{\rightleftarrows}[Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(NH_2R)]^++CH_2=CHCN=Ph,\;p-tolyl)$ were calculated to be 0.28 (for R = Ph) and 3.1 (R = p-tolyl) at $21^{\circ}C$. The relative stability of the ${\sigma}$-donor amine versus the ${\pi}$-olefinic acrylonitrile complex has been found largely dependent upon the amine-basicity $(pK_b)$, implicating that acrylonitrile practically competes with amine in the platinum coordination sphere. On the contrary to the formation of the acrylonitrile complex, no reaction of $Pt(2,6-(Cy_2PCH_2)_2C_6H_3)(OTf)$ with other olefins such as ethylene, styrene and methyl acrylate was observed.

• Carbon letters
• /
• 제22권
• /
• pp.48-59
• /
• 2017

This study synthesized pure anatase carbon doped $TiO_2$ photocatalysts supported on a stainless steel mesh using a sol-gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide (DMF)/$TiCl_4$. The influence of the pyrolysis temperature and holding time on the morphological characteristics, particle sizes and surface area of the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The XRD patterns showed that the supported $TiO_2$ nanocrystals are typically anatase, polycrystalline and body-centered tetragonal in structure. The EDS and XPS results complemented one another and confirmed the presence of carbon species in or on the $TiO_2$ layer, and the XPS data suggested the substitution of titanium in $TiO_2$ by carbon. Instead of using calcination, PAN pyrolysis was used to control the carbon content, and the mesoporosity was tailored by the applied temperature. The supported $TiO_2$ nanocrystals prepared by pyrolysis at 300, 350, and $400^{\circ}C$ for 3 h on a stainless steel mesh were actual supported carbon doped $TiO_2$ nanocrystals. Thus, $PAN/DMF/TiCl_4$ offers a facile, robust sol-gel related route for preparing supported carbon doped $TiO_2$ nanocomposites.

• 디자인학연구
• /
• 제12권3호
• /
• pp.29-40
• /
• 1999

Walter Gropius, famous architect of Bauhaus, once treated of pure mind which was revealed in the system of object and its phenomena through sense of sight while examining material being and illusive being. And Thomas Aquinas said that man can have a creative power only with modest mental state void of prejudice saying that he expected God to come to him after his soul went out of him. The same thing was said by so many great philosophers and thinkers other than him. I think his saying, "God comes after Soul's escape from the body for a new creation", has a real truth for all times and places and beauty itself beyond expression. Why\ulcorner The reason why the saying is so true is because it has a Yin and Yang Idea, that is, the Soul means a dark spirit correspondent to Yin between both oriental ideas and God does a bright spirit correspondent to Yang between them. By reason of this idea, I would like to assert that we should take it granted that we stand in need of the same bright Yang's spirit as God has for the new creation, and let the Yang's bright spirit come to our minds. We can call it divine 'Providence', or call it God's guidance, which we cannot help accepting as a man's fatality. As God was pleased after he made man and all the creatures by dint of his design, so man was pleased after he made everything he needed by the same design that he accepted from God. In spite of pleasure of different dimensions from what God and Man has each other, their way of empathies were all the same. In this paper I compared a worldly lower conception by which man designed his products for his sensuous satisfaction with a higher conception by which God designed his creatures for his mental satisfaction. I intended to infer what destined relation there must be between both God's and man's creations, trying to remind designers that they have to confess to have not so divine a providence as God has for creation because I think the real truth is that they had regarded their works of product design as a routine occurrence for their physical convenience in the industrial plans.ial plans.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.330-330
• /
• 2009

For the high-performance Quantum dots-Light Emitting Diodes in the near-infrared and visible spectrum, adequate electro- and hole-transporting layers are required. The operation lifetimes of typical materials used in OLEDs are very limited and degraded especially by the oxygen and humid atmosphere. In this work, NiO was selected as a possible hole-transporting layer replacing the TPD film used in QD-LEDs. About 40-nm-thick NiO films have been deposited by the rf-sputtering method on various technical substrates such as FTO/glass, ITO/glass, and ITO/PEN. For the balance of charge carriers and quenching consideration, the resistivity of the deposited NiO films was investigated controlling the oxygen in the sputtering gas. NiO films were fabricated at room temperature and about 6mTorr using pure Ar, 2.5%-, 5%-, and 10%-mixed $O_2$ in Ar respectively. We also investigated the rf-power dependence on NiO films in the range of 80 ~ 200 Watts. The resistivity of the samples was varied from highly conductive to resistive state. Also discussed are the surface roughness of NiO films to provide the smooth surface for the deposition of QDs.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1023-1027
• /
• 2002

본 연구에서는 초임계 mixing을 이용하여 $SrTiO_3:\;Pr^{3+}$ 형광체 분말을 제조하였으며, 일반적 제조 방법인 고상법으로 제조된 분말과 발광특성을 비교하였다. 초임계 mixing에 의해 제조된 $SrTiO_3:\;Pr^{3+}$ 형광체 분말은 단상의 perovskite 구조를 갖으며, 형상은 구형인 좁은 입도분포를 보인다. 발광특성의 증대를 sensitizer인 $Al^{3+}$과 $Ga^{3+}$을 첨가하여 형광체의 발광특성을 관찰하였다.