• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.485-501
• /
• 1997

Pressure control is possible driving a simple ON/OFF 3-way valve of hydraulic servo system by pulse width modulation signal. But the pressure varies according to the duty ratio and carrier frequency and repeated on-off action induces pressure fluctuation. So equations for mean pressure and ripple amplitude are theoretically derived as a function of on/off time, the system parameters which decide the pressure characteristics are arranged and they are verified by experimental study. As the result selection criteria for the major design parameters are established and the basic strategy to suppress the unnecessary fluctuation can be provided for a hydraulic pressure control system using these type of valves.

• 한국정보통신학회논문지
• /
• 제6권3호
• /
• pp.405-409
• /
• 2002

최근 FCC 위원회에서는 제안적으로 UWB의 사용을 승인하였으며 기존의 UWB 기술을 보완하며 이 기술로 응용 가능한 표준안을 발표할 계획이다. 본 논문에서는 AWGN 채널에서 BCH를 채용시 M-ary 값이 변화함에 따른 UWB 통신 시스템의 성능을 비교하였다. 또한 UWB 변조방식으로 고려되어 오던 M-ary PAM과 PPM의 방식을 M-ary 수를 변화시킴에 따라 에러 확률을 비교 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.107-111
• /
• 1997

Pressure control is possible by pulse width modulation signal driving a simple ON/OFF 2-way valve of hydraulic servo system. But it indices pressure fluctuation due to repeated on-off action and the pressure varies according to the duty ratio and carrier frequency. So mean pressure and ripple amplitude are arranged by experimental study as the driving signal change which decides the pressure characteristics. As the result selection criteria of the major design parameters may be established and the basic strategy to suppress the unnecessary flucturion may be provided for a hydraulic pressure control system.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2523-2532
• /
• 1994

In this paper, active noise control is performed in a duct system using the periodic pulse train which corresponds to the periodic component of noise source as a reference signal. Control algorithm applied in this study is possible to eliminate the acoustic feedback which occurs in the conventional filtered-x and filtered-u LMS algorithm by using electrical reference signal and has the fast adaptation speed with low filter orders by using synchronous sampling method is discussed via computer simulations and experiments of case studies such as frequency modulation, amplitude modulation and frequency differency between source signal and reference signal.

• Journal of Communications and Networks
• /
• 제10권1호
• /
• pp.63-70
• /
• 2008

Narrow-band interference (NBI) from the coexisting narrow-band services affects the performance of ultra wideband (UWB) systems considerably due to the high power of these narrow-band signals with respect to the UWB signals. Specifically, IEEE 802.11a systems which operate around 5 GHz and overlap the band of UWB signals may interfere with UWB systems significantly. In this paper, we suggest a novel NBI suppression technique based on singular value decomposition (SVD) algorithm in time hopping UWB (TH-UWB) systems. SVD is used to approximate the interference which then is subtracted from the received signals. The algorithm precision and closed-form bit error rate (BER) expression are derived in the wireless multipath channel. Comparing with the conventional suppression methods such as a notch filter and a RAKE receiver, the proposed method is simple and robust and especially suitable for UWB systems.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.559-562
• /
• 2002

본 논문에서는 최근 제한적으로 사용이 승인된 UWB(초광대역： Ultra-Wideband) 통신을 AWGN 하에서 다중 접속을 고려하지 않은 단일 사용사일 경우로 가정시, M진 값이 변화함에 따른 에러율과 성능 개선 기법으로 BCH를 채용시의 에러율을 비교 분석하였다. 기존에 연구되어 오던 변조로 PAM(Pulse Amplitude Modulation)과 PPM(Pulse Position Modulation)방식을 비교하였으며 에러율 $10^{-6}$을 기준으로 M=2, 4일 경우 PAM이 PPM보다 약 E$_{b}$/N$_{o}$ =3~4［dB］, M=8 이상의 경우 PPM이 약 E$_{b}$/N$_{o}$ =9［dB］, M=16일 경우 약 E$_{b}$/N$_{o}$ =15［dB］정도 성능이 우수하였다. AWGN 채널 하에서 에러 정정 부호인 BCH(15,7)를 도입하였을 경우 에러율 $10^{-6}$을 기준으로 PAM방식은 약 E$_{b}$/N$_{o}$ 가 약 1［dB］, PPM 방식은 M=2, 4일 경우 약 E$_{b}$/N$_{o}$ =1~1.5［dB］정도 개선되었다.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.797-804
• /
• 2012

본 논문은 저전력 통신을 위하여, 압축 센싱에 적용한 QAPM 변조 방식을 제안한다. QAPM 변조 방식은 QAM 변조 방식과 PPM 변조 방식을 결합한 방식으로써, 자리(PPM의 posion) 개수가 늘어날수록 심볼 간의 거리가 멀어져 BER 성능과 전력 효율을 향상시킨다. 또한, 자리개수를 늘릴수록 대역이 손실 발생될 수 있으나, 성김(sparsity) 특성은 증가된다. 이러한 높은 성김 특성은 Nyquist 속도 이하의 샘플링으로도 완전하게 신호를 복원할 수 있는 압축 센싱에 적용하기에 매우 적합하다. 따라서 본 논문은 압축 센싱에 적용된 QAPM 시스템이 수신기에 있는 ADC(Analog Digital Converter)의 부담을 줄이면서도 BER 성능을 향상시키는 저전력 시스템임을 시뮬레이션을 통해 확인하였다.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.477-484
• /
• 2010

A pulse width modulation-voltage source inverter (PWM-VSI) is used for variable speed permanent magnet synchronous motor (PMSM) drives. The PWM-VSI fed PMSM has two major disadvantages. Firstly, the PWM-VSI DC-link voltage limits the magnitude of the PMSM terminal voltage. As a result, the motor speed is restricted. Secondly, in a low speed range, the PWM-VSI modulation index declines. This is caused by a high DC-link voltage and a low terminal voltage ratio. As a result, the distortion of the voltage command and the stator current are increased. This paper proposes an optimal pulse amplitude modulation (PAM) control which can adjust the inverter DC-link voltage by using a buck-boost DC-DC converter. At a low speed range, the proposed system can reduce the distortion of the voltage command, which improves the stator current waveform. Also, the allowable speed range is extended. In order to verify the proposed method, experimental results are provided to confirm the simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1749-1753
• /
• 2003

We proposed several systems for 1Giga bit Modem. The first, Binary ASK(Amplitude Shift Keying) system has a high speed shutter transmitter and no IF(Intermediate Frequency) receiver only by symbol synchronization. The advantage of proposed system is that circuitry is very simple without IF process. The disadvantage of proposed system are that line spectrum occurs interference to other channels, and enhancement to 4-level system is impossible due to its large SNR degradation. The second, Binary phase modulation system has a high speed shutter transmitter and IF-VCO(IF-Voltage Controlled Oscillator) control by base-band phase rotation. Polarity of shutter window is changed by the binary data. The window should be narrow same as above ASK. The advantage of proposed system is which error rate performance is superior. The disadvantage of proposed system are that Circuitry is more complex, narrow pull-in range of receiver caused by VCO and spectrum divergence by the non-linear amplifier. The third, 4-QAM(Quadrature Amplitude Modulation)system has a nyquist pulse transmitter and IF-VCO control by symbol clock. The advantage of proposed system are that signal frequency band is a half of 1GHz, reliable pull-in of VCO and possibility of double speed transmission(2Gbps) by keeping 1GHz frequency-band. The disadvantage of proposed system are that circuit complexity of pulse shaping and spectrum divergence by the non-linear amplifier.

• 한국통신학회논문지
• /
• 제31권12A호
• /
• pp.1189-1197
• /
• 2006

Ultra-wideband(UWB) is a killer technology for short-range wireless communications. In the past, most of the UWB research focused on physical layer but the unique characteristics of UWB make it different to design the upper layer protocols than conventional narrow band systems. Cross-layer protocols have received high attention for UWB networks. In this paper, we investigate the performance of two physical layer schemes: Time Hopping Binary Pulse Position Modulation(TH-BPPM) and Time Hopping Binary Pulse Amplitude Modulation (TH-BPAM) with proposed private MAC protocol for UWB ad-hoc networks. From pulse level to packet level simulation is done in network simulator ns-2 with realistic network environments for varying traffic load, mobility and network density. Our simulation result shows TH-BPAM outperforms TH-BPPM in high traffic load, mobility and dense network cases but in a low traffic load case identical performance is achieved.