• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.261-265
• /
• 2001

In this paper, a current-source type parallel indudor compensated load resonant high-frequency soft switching inverter using IGBTs for driving the newly-produced silent discharge type ozone generating tube and excimer lamp for UV generation which incorporate a single switched capacitor resonant snubber between the port in DC busline side is presented, together with its pulse modulated unique output power regulation characteristics.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.839-841
• /
• 2004

This paper presents a SPMSM servo motor drive system using high performance TMS320 F281T DSP for the industrial application. This high performance DSP contains some special peripheral circuits such as PWM (Pulse Width Modulation) waveform generation circuit, Quadrature Encoder Pulse (QEP) generation circuit and Analog to Digital Converter (ADC) circuit. In this paper, a servo drive control system is constructed using high performance DPS for the overall system cost reduction and the size minimization.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1947-1950
• /
• 2008

Printing technology is a very useful method in the several process of industrial fabrication due to noncontact and fast pattern generation. To make micro pattern, we investigate the electrostatic induced inkjet printer head for micro droplet generation and drop-on-demand jetting. In order to achieve the drop-on-demand micro droplet ejection by the electrostatic induced inkjet printer head, the pulsed DC voltage is supplied. In order to find optimal pulse conditions, we tested jetting performance for various bias and pulse voltages for drop-on-demand ejection. In this result, we have successful drop-on-demand operation and micro patterning. Therefore, our novel electrostatic induced inkjet head printing system will be applied industrial area comparing conventional printing technology.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.677-681
• /
• 2005

This Paper presents a 6 pulse shift operation control mode of current-source-inverter to make improvement of efficiency and to reduce the frequency of inverter switching for photovoltaic generation system using PWM current-source-inverter. This system is connected solar cell energy directly without using a storage cell. The proposed circuit can maintain maximum voltage of photovoltaic generation of take advantage of six Buck-Boost converter and a full-bridge inverter determines the polarity of AC output. That is controlled by using digital signal processor TMS320F2812 for operation about a 6 pulse shift operation control of current-source-inverter, and it is verified through the experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.833-837
• /
• 2003

The spectral and temporal characteristics of a V-groove AIGaAs-GaAs quantum wire (QWR) laser were investigated with varying the cavity length. At cavity lengths shorter than 300 ${\mu}{\textrm}{m}$, a discrete shift in tile wavelength occurred from the n=1 to the n=2 subband due to the increased cavity losses. Utilizing this characteristic, ultrafast lasing characteristics at each subband were investigated by tile gain switching method.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.86-91
• /
• 2009

The electrons injected into a laser wakefield undergo betatron oscillation and give rise to the emission of intense X-ray radiation. To investigate the generation conditions of the X-rays, the relativistic motion of an electron injected in an off-axis position has been simulated with wakefield profiles which are pre-calculated with a two-dimensional particle-in-cell code. The wakefield with a plasma density of $1.78{\times}10^{18}\;cm^{-3}$ is generated by the laser with an intensity of $1.37{\times}10^{18}\;W/cm^2$ and a pulse width of 30 fs. From the calculation of the single particle motion, the characteristics of the betatron radiation are investigated in the time domain. As the transverse injection position increases, the power and the duration time of the radiation increase, but the width of each pulse decreases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.730-736
• /
• 2013

Time-domain clutter generation model for airborne pulse doppler phase-array radar is presented. Time-domain surface clutter signal is generated assuming earth of a sphere and considering geometry of a clutter patch, and generation of sub-array clutter signal is presented. The generated sub-array clutter signal can be used by simulation input signal in various radar applications of DBF(Digital Beamforming), ABF(Adaptive Beamforming), Stap(Space-Time Adaptive Processing) and etc.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.596-599
• /
• 2003

In this paper, we designed the digital pulse motor control chip including a circular interpolation function. The proposed algorithm in this paper is a nonparametric cure generation algorithm (Jordan's algorith) and a very simple algorithm. So the design for this algorithm used a small number of gates. Also an average error is fairly low. The max output speed is 4Mpps(Pulse per second), the max input frequency is 16MHz and the chip is useful for the stepping and servo motors. The software contains one or two, and many axes linear interpolation algorithm and two axes circular interpolation algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.146-150
• /
• 2004

The effects on non-thermal plasma generation by duty Ratio and frequency of pulse voltage were investigated experimentally. For these, a new type of non-thermal plasma generator with mesh electrode was manufactured and it was possible to generate the surface and silent discharge simultaneously by new type of non-thermal plasma generator. Duty ratio and frequency were selected as main parameters to control the movement of electron which is mainly related to the non-thermal plasma generation. The characteristics of non-thermal plasma generation were investigated indirectly by measuring the I-V curve and quantity of ozone generation. The most effective condition of duty ratio and frequency to generate the non-thermal plasma was identified by experiments with manufactured non-thermal plasma generator.

• Journal of Radiation Protection and Research
• /
• v.30 no.2
• /
• pp.85-89
• /
• 2005

Aspects of the scintillation mechanism in organic systems obtained on the base of precise measurements of the radioluminescence pulse shape are discussed. It shown that the process of scintillation light pulse formation is mainly determined by initial conditions of exited states generation.