• 제목/요약/키워드: pulp powder

검색결과 76건 처리시간 0.021초

누에 인공사료의 Cellulose원 개발에 관한 연구(I) (Study on the Extracted Cellulose Powder from Natural Resources for Artificial Diet of Silkworm, Bombyx mori (I))

  • 김주읍;박광의;성수일;유재복
    • 한국잠사곤충학회지
    • /
    • 제19권1호
    • /
    • pp.5-7
    • /
    • 1977
  • 누에인공사료의 조성중 필수적인 cellulose성분을 천연의 자원에서 개발하기 위해 뽕나무가지, 미류나무가지, 리기다소나무와 이태리포프라의 펄프분말, 왕겨, 톱밥, 볏짚등을 대상으로 실험하였다. 실험결과 뽕나무가지와 리기다소나무펄프가 인공사료의 cellulose대치 가능 자원임이 밝혀졌다. 특히 뽕나무가지의 화학적인 처리방법에 의하여 누에성장발육에 보다 유용한 제품을 얻을 수 있었고, 나아가서 장차 인공사료개발에 cellulose원으로서의 역활을 기대할 수 있게 되었다.

  • PDF

마그네타이트 분말의 표면개질화에 의한 부유물질의 고속 제거 (Study on Rapid Removal of Suspended Solid by Modified Magnetite Powder)

  • 이혁희;박상원
    • 한국환경과학회지
    • /
    • 제12권9호
    • /
    • pp.1017-1023
    • /
    • 2003
  • The high speed elimination process of suspended solid was investigated to treat the pulp waste water by using surface modified magnetite particle and magnetic power. The effects of the various aluminum salts such as Al(NO$_3$)$_3$ㆍ9$H_2O$, AlC1$_3$ㆍ6$H_2O$, $Al_2$(SO$_4$)$_3$ㆍ13∼14 on the COD, BOD and suspended solid were systematically studied. It has been found that the 2.0 wt% of Al was most effective for the modification of Fe$_3$O$_4$ powder and then best for the treatment of pulp waste water, Optimum quantity of modified magnetite in this study was 12 wt%, and aging time was found to be 12 hours. Comparing with the conventional process, the required time for SS removal was drastically decreased. BOB and COD were also effectively removed when applied to the pulp wastewater.

Retention and Drainage Characteristics with Inverse Emulsion Type C-PAM

  • Son, Dong-Jin;Kim, Bong-Yong
    • 펄프종이기술
    • /
    • 제38권5호
    • /
    • pp.24-30
    • /
    • 2006
  • This study was performed to characterize inverse emulsion type cationic polyacrylamide (PAM) and to compare with powder and salt dispersion type PAMs as a retention and drainage aid. Salt dispersion type PAM has defects of high amount of salt which increases conductivity of white water, low active polymer contents and relatively worse retention and drainage properties than others because of its low molecular weight. Powder type PAM has benefit of high active polymer contents and good retention and drainage properties, but defects of low dissolution speed and insoluble particle generation were observed. However, inverse emulsion type showed the best retention and drainage aids among them by controlling molecular weight and morphology easily and it had relatively higher active polymer contents and better solubility.

폐석고보드지의 재활용 방안 탐색을 위한 기초연구 (Study on the recycling of gypsum board paper generated from construction wastes)

  • 이지영;윤경태;김철환;성용주;김병호;임기백;김선영
    • 펄프종이기술
    • /
    • 제45권3호
    • /
    • pp.20-26
    • /
    • 2013
  • We investigated practical methods of using recycled gypsum board paper in the paper industry. Gypsum board paper is used to produce construction gypsum board, and can be recycled through the recycling process of construction wastes. The experiments were carried out in two ways: One was the substitution of recycled gypsum board papers for KOCC, and the other was the use of recycled gypsum board paper powder. Recycled gypsum board paper was not disintegrated easily, but high temperature and the use of chemicals were able to improve their disintegration. The physical properties of handsheets made of the pulp of recycled gypsum board paper exhibited the same performance level as those made from KOCC except in the parameter of compressive strength. The powder of recycled gypsum board paper was manufactured using a grinder and handsheets were made with the powder and KOCC. The bulk was increased, but the strength properties were decreased by the addition of the powder.

감귤의 부위별 섭취가 노령흰쥐의 항산화능에 미치는 영향 (Effect of Different Part of Mandarin Intake on Antioxidative Capacity in 15-month-old Rats)

  • 김지혜;김미경
    • Journal of Nutrition and Health
    • /
    • 제36권6호
    • /
    • pp.559-569
    • /
    • 2003
  • This study was performed to investigate the effect of whole mandarin, peel, and pulp intake of Citrus unshiu Marc on the antioxidative capacity of 15-month-old rats. Forty-eight male Sprague-Dawley rats weighing 621.9 $\pm$ 10.1 g were separated into four groups according to body weight. The rats were raised with diets containing 5% (w/w) dried mandarin powder for four weeks. Three powders were used, consisting of mandarin peel, pulp, and the entire fruit. Total flavonoids, antioxidant vitamins and dietary fiber was highest in the mandarin peel powder, followed by the whole mandarin powder and the mandarin pulp. The body weight gains of the whole mandarin and mandarin pulp groups were higher, while that of the mandarin peel group was lower than that of the control group. Food intake and ratios of liver, kidney and epididymal fat pad (EFP) weights to body weight were not significantly different among the groups, but ratios of EFP weights per body weight of the experimental groups tended to be lower than that of the control animals. Plasma and liver TBARS concentrations decreased in all the mandarin groups compared to the control group. Plasma and liver xanthine oxidase (XO) activity decreased in all of the mandarin diet groups. Erythrocyte and liver SOD activity in all of experimental groups was not significantly different from the control group. Plasma vitamin A concentration increased significantly in all of the mandarin diet groups. That of the mandarin peel group was 4 times higher than that of the control group. Plasma total carotenoids and vitamin C level also increased in the mandarin peel group. Plasma vitamin I level was not significantly different among the groups.

Iridoid 화합물이 치수절단 후 잔존치수 조직에 미치는 영향 (THE EFFECT OF IRIDOID COMPOUND ON THE REMAINING PULP TISSUE AFTER PULPOTOMY)

  • 권혁춘;박동성;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.710-719
    • /
    • 1997
  • Aucubin, an iridoid glucoside, which is isolated from Aucuba japonica, has some biological effects. This study was to investigate the effect of aucubin on the remainig pulp tissues after pulpotomy. Mongrel dog's coronal pulps were mechanically exposed with a sterile round bur and excised with sterile sharp excarvator. After bleeding was controlled, in control group, $Ca(OH)_2$ powder was applied on the remaining pulps and the cavities were sealed with Z.O.E. cement. In experimental group 1, mixed powder with $Ca(OH)_2$ and aucubin(l : 1 by weight) was applied on the pulpotomized pulp surfaces. After the cavities were covered with sterile aluminum foil, they were sealed with Z.O.E. cement. In experimental group 2, only aucubin powder was applied on the remaining pulps and then they were treated the same as experimental group 1. In the all groups, the pulps were histopathologically observed by light microscope at the time intervals of 1, 2 and 4 weeks after experiment. The results were as follows : 1. In control and experimental groups, mild vascular congestion and bleeding were found in most of the specimens. Less inflammatory infiltration was observed in experimental groups than in control group. 2. Dentin bridge formation was found after 1 week at both control and experimental group 1. Dentin birdge had discontinuous osteodentin like appearance or contained some dentin chips. In experimental group 2, dentin bridge was not seen. 3. The coagulation necrosis layer on the remaining pulp tissues was seen in all groups. In experimental group 2, the thickest layer was observed. And in control group, coagulation necrosis layer was similar as in experimental group 1.

  • PDF

재생펄프의 점착성 이물질 정량 분석 방법 (Quantification Method of Macro Stickies for Recycled Pulps)

  • 윤병태;오세균
    • 펄프종이기술
    • /
    • 제31권2호
    • /
    • pp.86-91
    • /
    • 1999
  • A new test method has been developed for a quantitative evaluation of macro-stickies in recycled pulps. The method uses a fine slot screen to separate a sticky particles form fiber in the pulp samples. The obtained sticky particles were spread on filter paper and covered with silicon carbide powder in order to make the stickies area with sufficient contrast between stickies and background. The stickies are then counted by a scanner-based image analysis system. The validity of this evaluation method of stickies of KOCC, ONP and white ledger wastepaper recycling plants respectively. It is shown that this method can be applied for a quantitative determination of stickies content in various recycled pulp samples. With this testing method, reproducible and reliable data were obtained for the actual mill pulp samples.

  • PDF

Studies on the Ligninolytic Enzyme Activities During Biological Bleaching of Kraft Pulp with Newly Isolated Lignin-Degrading Fungi

  • Lee, Seon-Ho
    • 펄프종이기술
    • /
    • 제31권2호
    • /
    • pp.8-14
    • /
    • 1999
  • A screening has been performed to find hyper-ligninolytic fungi, which degtrade beech and pine lignin extensively in order to broaden the understanding of the ligninolytic enzymes elaborated by various white-rot fungi. One hundred and twenty two ligninolytic strains were selected from decayed woods with a selective medium for screening ligninolytic wood-rotting fungi. Two of them, Phanerochaete sordida YK-624 and YK-472, showed much higher ligninolytic activity and selectivity in beech-wood degradation than typical lignin-degrading fungi, phanerochaete chrysosporium and Coriolus versicolor. They also degraded birch dioxane lignin and residual lignin in unbleached kraft pulp(UKP) much more extensively than P. chrysosporium and C. versicolor. During fungal treatment of beech wood-powder, the fungus strain P. sordida YK-624 showed higher activity of extracellular manganese peroxidase (MnP) in the medium than P. chrysosporium. It also showed MnP activity, which would not be lignin peroxidast during treatment of oxygen-bleached kraft pulp(OKP) and under enzyme-inducing conditin.

  • PDF

제지공정의 유기 충전제로서 침엽수 잎 분말 적용 (Application of Conifer Leave Powder to the Papermaking Process as an Organic Filler)

  • 성용주;김동성;이지영;서영범;임창국;권완오;김진두
    • 펄프종이기술
    • /
    • 제46권4호
    • /
    • pp.62-68
    • /
    • 2014
  • The application of conifer leave to the papermaking process as a functional organic filler was investigated in this study. The powder of the conifer leave after hot water extraction for the functional extract, such as phytoncide, was applied to OCC stock. The comparison between the commercial wood flour and the conifer leave powder as organic filler for OCC paper were conducted with various wet pressing conditions. The amount of the water removal by the wet pressing process and the bulk of handsheet were increased by the addition of the wood flour and the conifer leave powder, although the tensile strength was decreased. At the higher pressure condition of the wet pressing, the wet pressing efficiency was greatly increased by the wood flour and the conifer leave powder. There was a little difference in the performance of the wood flour and the conifer leave powder as an organic filler. Those results showed the conifer leave powder could be an alternative resource to the wood powder for papermaking organic filler.

판지의 강도 향상을 위한 신규 유기충전제 개발 (Development of New Organic Filler for Improving Paperboard Strengths)

  • 이지영;김철환;박종혜;김은혜;윤경태
    • 펄프종이기술
    • /
    • 제47권5호
    • /
    • pp.74-79
    • /
    • 2015
  • Wood powder is widely used in paperboard mills to increase bulk and reduce drying-energy consumption, but this material also deteriorates paper strength because it interferes with the bonds between fibers. Although there have been many studies done to improve the strength of paperboard containing wood powder, specific applications have not recently been observed in paperboard mills. In this study, we carried out a new approach for improving paperboard strength by developing a new organic filler with the ability to increase the bonds between fibers. The residue of tapioca starch was used as raw material to manufacture an organic filler. The functionalities, including bulk and strength, were evaluated by making handsheets containing either wood powder or tapioca organic filler, or a mixture of the two, and measuring their physical properties. The organic filler showed lower bulk improvement and higher paperboard strength than the wood powder. The mixture of tapioca organic filler and wood powder showed improved paperboard strength compared to wood powder alone. Therefore, tapioca residue can be used as a raw material to manufacture an organic filler for paperboard mills.